Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 1/7 * Features & Application: pp 1.Power supply PWM circuit input / output inductor 2.Power line noise suppression 3.DC-DC Converter 4.To help you go pass CE/FCC standard 5.TFT/ WiFi/ MobilePhone/ MP3/ PDA etc. Application 6.Low Profile for all compact design * Product Identify: y Pin Foot SMD Pb PN SFMP ----------------ID 1 1 2 3 4 5 6 7 3010 ------2 Color Black Made In Korea/Indonesia RoHS Compliant - SGS Test Report <1000 <1000ppm * Part No. Example: EMI shield Cd ND Hg ND Cr+6 ND PBB ND PBDE ND * Dimensions: [mm] P [ ] - 6R8 M [ ] --- ------ ------ ---- ----3 4 5 6 7 SAMWHA Series Code Dimension Code : 3010 = (L) 3.1 x (W) 3.1 x (H) 1.0 mm RoHS Compliance [ I ] : For SFMP3010 / 3015 Marking series Code Inductance : 6R8 = 6.8uH Ex: 100=10uH, 101=100uH Tolerance: M=20%, N=30% [ S ] : For custom special design SFMP2510 / 2512 TYPE A C E SFMP3010 / 3015 TYPE A C E Recommend Pad Layout [ mm ] H Schematic SFMP6012 / 6045 / 8040 TYPE A C E 6R8 * Keep out of splashing water or salt water * Operating & Storage Condition: 1.Storage Condition -40 ~ +85 o C / RH 65 ± 10% 2.Storage Life Time 6 Months @ 20 o C / RH 65% (no seal off) 3.Operating Condition -40 ~ +105 o C (Including self-temperature rise) Attention & Caution: * Toxic Gas (Hydrogen sulfide, Sulfurous acid, Chlorine, Ammonia) * Vibrations or shocks which exceed the specified condition * Dew condense * Please be careful for the stress to this product by board flexure or something after the mounting. * Test Condition: Equipment Ambient Ambient Type Si Size Code A (Max) B (Max) C (Max) D (Ref.) E (Ref.) F (Ref.) G (Ref.) H (Ref.) SFMP 2510 2.1 2.6 1.0 0.40 2.1 1.7 0.9 2.1 SFMP 2512 2.1 2.6 1.2 0.40 2.1 1.7 0.9 2.1 SFMP 3010 3.1 3.1 1.0 0.90 2.7 1.7 1.0 2.7 SFMP 3015 3.1 3.1 1.5 0.90 2.7 1.7 1.0 2.7 SFMP 6012 6.2 6.2 1.2 1.15 5.1 4.7 1.6 5.7 SFMP 6045 6.2 6.2 4.5 1.15 5.1 4.7 1.6 5.7 SFMP 8040 82 8.2 82 8.2 42 4.2 1 60 1.60 63 6.3 5.6 6 18 1.8 7.5 * Recommend IR Reflow Curve: 1.L – HP4284A LCR Meter 2.RDC – HIOKI 3220 3.IDC – HP4284A+HP42841A DC-Bias 4.Dimension - Mitutoyo 5.Temperature – TABAI (PL-1G) Temperature 20 ± 5 o C Humidity RH 65 ± 20% If there may be any doubt on the test result, Measurement shall be made within the following limits: Temperature 25 ± 5 o C Humidity RH 75 ± 10% ERSA-HF7 Lead Free Solder : A = 217 oC Time : C = 40 ~ 60 Sec. B = 245 +/- 5 oC Temp [ oC ] B A S ld i Soldering 180 160 100 C 60 ~ 90 Sec. 50 Notice : Iron Soldering , Solder < 30 Watt , Direct touch the terminal x 3 Sec. Max. @ 350 oC Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 2 /7 Inductance (uH) PART No. L-Tolerance RDC ( m Ohm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP2510P-R47□ 0.47 M,N 40 48 2800 2300 SFMP2510P-1R0□ 1.00 M,N 71 85 2000 1700 SFMP2510P-1R5□ 1.50 M,N 107 128 1700 1400 SFMP2510P-2R2□ 2.20 M 158 190 1400 1100 SFMP2510P-3R3□ 3.30 M 253 304 1200 940 SFMP2510P-4R7□ 4.70 M 367 440 980 780 SFMP2510P-6R8□ 6.80 M 451 541 820 700 SFMP2510P-100□ 10.00 M 712 854 650 520 ■ ■ ■ ■ Inductance test Freq. : 100KHz / 0.1V L-Tolerance : N = 30% , M = 20% The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Inductance (uH) PART No. L-Tolerance RDC ( m Ohm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP2512P R47□ SFMP2512P-R47□ 0 47 0.47 MN M,N 47 56 3700 2200 SFMP2512P-1R0□ 1.00 M,N 73 88 2700 1800 SFMP2512P-1R5□ 1.50 M,N 105 126 2200 1500 SFMP2512P-2R2□ 2.20 M 129 155 2000 1300 SFMP2512P-3R3□ 3.30 M 227 272 1600 1000 SFMP2512P-4R7□ 4.70 M 338 406 1300 810 SFMP2512P 5R6□ SFMP2512P-5R6□ 5 60 5.60 M 375 450 1150 720 SFMP2512P-6R8□ 6.80 M 510 612 1100 660 SFMP2512P-100□ 10.00 M 630 756 900 590 ■ Inductance test Freq. : 100KHz / 0.1V ■ L-Tolerance : N = 30% , M = 20% ■ The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) █ The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.07.20 Pages: 3 /7 Inductance (uH) PART No. L-Tolerance RDC ( m Ohm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP3010P-1R0□ 1.00 M,N 65 78 1950 1700 SFMP3010P-1R2□ 1.20 M,N 80 96 1900 1650 SFMP3010P-1R5□ 1.50 M,N 80 96 1600 1650 SFMP3010P-2R2□ 2.20 M 95 114 1450 1450 SFMP3010P-3R3□ 3.30 M 160 192 1050 1300 SFMP3010P-4R7□ 4.70 M 190 228 950 1100 SFMP3010P-6R8□ 6.80 M 300 360 760 850 SFMP3010P-100□ 10.00 M 450 540 610 720 SFMP3010P-150□ 15.00 M 740 888 480 560 SFMP3010P-220□ □ 22.00 M 980 1176 420 500 SFMP3010P-330□ 33.00 M 1550 1860 340 415 SFMP3010P-470□ 47.00 M 2000 2400 270 320 ■ ■ ■ █ Inductance test Freq. : 1MHz / 0.1V L-Tolerance : N = 30% , M = 20% The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Inductance (uH) PART No. L-Tolerance RDC ( m Ohm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP3015P-1R0□ 1.00 M,N 40 48 2350 2350 SFMP3015P-1R5□ 1.50 M,N 55 66 2000 2100 SFMP3015P-2R2□ 2.20 M 60 72 1650 1800 SFMP3015P-3R3□ 3.30 M 93 112 1400 1600 SFMP3015P-4R7□ 4 70 4.70 M 113 136 1200 1400 SFMP3015P-6R8□ 6.80 M 176 211 1050 1100 SFMP3015P-100□ 10.00 M 234 276 880 1000 SFMP3015P-150□ 15.00 M 352 422 680 800 SFMP3015P-220□ 22.00 M 510 622 580 600 SFMP3015P-330□ 33.00 M 799 959 460 500 SFMP3015P 470□ SFMP3015P-470□ 47 00 47.00 M 1172 1406 380 400 SFMP3015P-101□ 100.00 M 2433 2920 270 290 ■ Inductance test Freq. : 1MHz / 0.1V ■ L-Tolerance : N = 30% , M = 20% ■ The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) █ The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 4 /7 Inductance (uH) PART No. L-Tolerance RDC ( m 0hm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP6012P-1R0□ 1.00 N 50 65 2800 2300 SFMP6012P-1R5□ 1.50 N 65 85 2400 2000 SFMP6012P-2R5□ 2.50 N 90 108 2100 1730 SFMP6012P-4R0□ 4.00 N 105 126 1800 1570 SFMP6012P-5R3□ 5.30 M 110 132 1500 1400 SFMP6012P-6R8□ 6.80 M 165 198 1300 1180 SFMP6012P-100□ 10.00 M 235 282 1000 1000 SFMP6012P-150□ 15.00 M 330 396 800 790 SFMP6012P-220□ 22.00 M 530 636 760 630 SFMP6012P-330□ 33.00 M 700 840 590 530 SFMP6012P-470□ 47.00 M 1050 1260 520 460 SFMP6012P-680□ 68.00 M 1350 1620 440 410 SFMP6012P-101□ 100.00 M 2180 2616 350 320 ■ Inductance test Freq. : 100KHz / 0.1V ■ L-Tolerance : N = 30% , M = 20% ■ The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) █ The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Inductance (uH) PART No. L-Tolerance RDC ( m 0hm ) yp Typ. Isat ( mA ) Typ. yp RDC (m Ohm ) Max. Irms ( mA ) Typ. yp SFMP6045P-1R0□ 1.00 N 14.0 18.2 8500 4200 SFMP6045P-1R5□ 1.50 N 16.0 20.8 8000 4000 SFMP6045P-2R2□ 2.20 N 21.0 27.3 6000 3500 SFMP6045P-3R3□ 3.30 N 24.0 31.2 5000 3200 SFMP6045P-4R7□ 4.70 M 31.0 40.3 4000 3000 SFMP6045P-6R3□ SFMP6045P 6R3□ 6 30 6.30 M 38 0 38.0 49 4 49.4 3800 2800 SFMP6045P-100□ 10.00 M 47.0 61.1 3000 2500 SFMP6045P-150□ 15.00 M 77.0 100.1 2300 1900 SFMP6045P-220□ 22.00 M 115.0 149.5 1900 1500 SFMP6045P-330□ 33.00 M 145.0 188.5 1500 1400 SFMP6045P-470□ 47.00 M 220.0 286.0 1300 1100 SFMP6045P 680□ SFMP6045P-680□ 68 00 68.00 M 330 0 330.0 429 0 429.0 1000 900 SFMP6045P-101□ 100.00 M 500.0 650.0 800 700 ■ Inductance test Freq. : 100KHz / 0.1V ■ L-Tolerance : N = 30% , M = 20% ■ The saturation current value ( Isat ) is the DC current value having inductance decrease down to 30%. ( at 20℃ ) █ The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 5 /7 Inductance (uH) PART No. L-Tolerance RDC ( m 0hm ) Typ. RDC (m Ohm ) Max. Isat ( mA ) Typ. Irms ( mA ) Typ. SFMP8040P-R90□ 0.90 N 6 8 11000 7800 SFMP8040P-1R4□ 1.40 N 7 10 9000 7000 SFMP8040P-2R0□ 2.00 N 9 12 7400 6300 SFMP8040P-3R6□ 3.60 N 15 20 5300 4900 SFMP8040P-4R7□ 4.70 N 18 24 4700 4100 SFMP040P-6R8□ 6.80 N 25 33 4000 3700 SFMP8040P-100□ 10.00 M 34 45 3400 3100 SFMP8040P-150□ 15.00 M 50 65 2700 2400 SFMP8040P-220□ 22.00 M 66 86 2200 2200 SFMP8040P-330□ 33.00 M 100 130 1900 1700 SFMP8040P-470□ 47.00 M 150 195 1500 1400 SFMP8040P-680□ 68.00 M 230 299 1200 1100 SFMP8040P-101□ 100.00 M 290 377 1000 1000 ■ Inductance test Freq. : 100KHz / 0.1V ■ L-Tolerance : N = 30% , M = 20% ■ The saturation current value ( Isat ) is the DC current value having g inductance decrease down to 30%. ( at 20℃ ) █ The temperature rise current value ( Irms ) DC current value having temperature increase up to 40℃ . ( at 20℃ ) Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 6 /7 Reliability: y SN Test Item Test Condition Specification 1 Dimension Actual Size ... Meet Spec 2 Thermal Shock (Temperature Cycle) Temperature:-40 oC / +85 oC kept stabilized for 30 minutes each Cycle: 100 Cycles (power off) 3 Humidity Resistance 4 Sample Qty/pcs Test Date Result 10 2010/03/09~ 2010/03/09 Pass Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/11 Pass Humidity: 90%~ 95% RH Temperature: 40±2 o C Test Time: 96±2 Hours Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/13 Pass HighTemperature Temperature: 85±2 o C Testing Time: 96±2 Hours Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/13 Pass 5 Low Temperature Temperature: -40 ± 2 o C Time: 96±2 Hours Elec. no variation Appearance 10 2010/03/09~ 2010/03/13 Pass 6 Temperature and Humidity Cycle Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/16 Pass Temperature Humidity Time 25 o C 90%~ 95% RH 3.0 Hr 55 o C 95%~ 96% RH 5.0 Hr 25 o C 90%~ 95% RH 3.0 Hr Cycle: 20 Cycles 7 Vibration Frequency: 10Hz~55Hz Amplitude: 1.5mm Direction: X,Y,Z Time: 2 Hours each Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass 8 Solderability Go through real SMT IR-Reflow The profile like our suggest profile. profile Preheat:160 ± 10 o C (90 sec) Peak:245±5 o C Peak Time: 50 Sec. / up 217 o C Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass 9 Soldering Heat Resistance Preheat:160 ± 10 o C (90 sec) Solder:Sn/Ag/Cu(Pb Free) Solder Temp.: 260 ± 5 o C Time: 3±1 seconds Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass 10 Iron Solder Heat Resistance Solder Temp.: 350 ± 5 o C Flux: Rosin Time: 3±1 seconds Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass 11 Bending Strength Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass Must no crack and 10 2010/03/09~ / / 2010/03/09 Pass Unit : mm 10 x 10 R : 0.5 Force : 1Kg / min. 12 Flexure Strength Unit : mm 10 x 20 1.2 2.0 4.5 13 4.5 Terminal Strength S X Mount on PCB Solder Cream 0.15 mm Push 10N force to X , Y damage direction Y 14 High-Voltage 100 V DC between core & winding Elec. no variation Appearance no deformation 10 2010/03/09~ 2010/03/09 Pass 15 Load life Temperature: 25±3 o C Load: Allowed DC Current Test Time: 96±2 Hours There Should Be No Evidence Of Short Or Open Circle 10 2010/03/09~ 2010/03/13 Pass Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Product Series Code: SFMP Brand: Samwha Tecom File Version: SFMP-V1 Editor: Chun Established Date: 2011.07.20 Description: SMD Shielded Power Inductor Latest Edit Date: 2011.01.13 Pages: 7 /7 Package g : 6R8 4.0±0.1 2.0±0.05 1.75±0.1 T± 0.05 6R8 6R8 End the Tape: Min 30 cm Blank Tape PEEL STRENGTH OF COVER TAPE PEEL OFF FORCE: 0.1N~0.7N ANGLE: 165~180O from the Tape Adhesive Face W±0.2 Size / mm 2510 2512 3010 3015 6012 6045 8040 P±0.1 W 8 8 8 8 16 16 16 3 2 4 Size / mm 2510 2512 3010 3015 6012 6045 8040 F±0.05 Ao±0.1 P 4 4 4 4 12 8 12 Ao 2.1 2.1 3.2 3.2 6.3 6.3 8.3 SAMWHA Label: Cust Name: PO: PN: Description: Qty: Date: Pb Bo±0.1 Ko±0.1 Bo 2.6 2.6 3.2 3.2 6.3 6.3 8.3 Ko 1.2 1.4 1.4 1.9 1.4 4.6 4.3 ± 0.75 Reel Color 7”=White, 13”=Dark Blue QC PASS 1 Customer Label: PN: Bar Code: PO: Description: ......................etc. A 180 180 180 180 330 330 330 T 0.3 0.3 0.3 0.3 0.35 0.35 0.35 C [Max] B± 0.5 A D ± 0.2 Labeled .or. Marked on Reel B 60 60 60 60 100 100 100 C 14.5 14.5 14.5 14.5 20.9 20.9 20.9 F 3.5 3.5 3.5 3.5 7.5 7.5 7.5 D 10 10 10 10 16.5 16.5 16.5 Reel Size 7” 7” 7” 7” 13” 13” 13” 5 Inner Small Box in Outter Large Box Unit: [cm] 1 Reel in Inner Small Box 25 4.5 34 34 36 36 Samwha Tecom Co., Ltd. Tel:+82-31-3349631 Fax:+82-31-3328121 Mail:[email protected] Qty / Reel 2000 2000 2000 2000 3000 1500 1000