CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS FV Lead type, With Conductive Polymer Series Hi-CAP Load life for 5000 hours at 105 C Mother board and VGA card for computer Item Characteristics Operating temperature range Leakage current max. Capacitance tolerance Dissipation factor max. ESR -55 ~ +105 C Less than or equal to the value of Table1 20% at 120Hz, 20 C Less than or equal to the value of Table1 Less than or equal to the value of Table1 Z+105 C / Z+20 C 0.75 ~ 1.25 Z-55 C / Z+20 C 0.75 ~ 1.25 Temperature characteristics (Impedance ratio at 100kHz) Less than specified value Within 20% of initial value Less than 150% of specified value Less than 150% of specified value Leakage current Capacitance change ESR tan Load life (after application of the rated voltage for 5000 hours at 105 C) In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105 C. Unit : mm DRAWING Laminated Case 0.05 PART NUMBER SYSTEM (See Page 52) Size P 0.5 D 0.5max. d L max. Lot No. L P 6.3 8.0 2.5 0.45 d 1.5 89 8.0 9.0 3.5 0.60 1.5 812 8.0 12.0 3.5 0.60 1.5 4min. Series Code 560 4FV Capacitance 15min. D 6.38 Voltage 6.3V is6 Negative Polarity Table 1. FV(Lead type) Series Characteristics List WV F 2.5 820 4 560 470 560 560 100 270 6.3 16 D(mm) 6.3 8 6.3 6.3 6.3 8 6.3 8 (mm) ESR(mΩ)max. 100~300kHz 8 9 8 8 8 9 8 12 7 7 7 8 8 8 25 11 Ripple current (mA rms) at 105°C 100kHz Dissipation factor 120Hz Leakage Current ( A) (max.) after 2 minutes 5000 6100 5000 4700 4700 6100 2820 5000 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 500 410 500 592 706 706 320 864 FREQUENCY COEFFICIENT OF PERMISSIBLE RIPPLE CURRENT 50 Frequency 120Hz 1kHz 10kHz 100~500kHz Coefficient 0.05 0.3 0.7 1