KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Description Schematic The KCP1017 series is robust, ideal for telecom and ground fault applications. It is a SPST normally open 4 3 1 2 switch (1 Form A) that replaces electromechanical relays in many applications. It is constructed using a GaAlAs LED for actuation control and an integrated monolithic die for the switch output. The die, fabricated in a high-voltage dielectrically isolated technology, is comprised of a photodiode array, switch control circuitry and MOSFET 1 FORM A NORMALLY OPEN switches. 4 3 1 2 Features 1. Normally open, single pole single throw 2. Control 60V AC or DC Voltage 3. Switch 130mA Loads 4. Controls low-level analog signals 5. High sensitivity, low ON resistance 6. Low-level off-state leakage current 7. High isolation Voltage 8. Pb free and RoHS compliant 9. Agency Approvals： • UL / CUL Approved (No. E108430) • FIMKO Approved Application • Telecommunications (PC, electronic notepad) • Modem • Telephone equipment • Security equipment • Sensors • Measuring and testing equipment • Factory automation equipment • High speed inspection machines Cosmo Electronics Corp. Document No. 69M00008.3 -1- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Outside Dimension Unit：mm 4.40 0.50±0.3 6.8±0.4 2.35Max. 0.05 0.254 2.30 4.60 0.40 2.54 TOLERANCE：±0.2mm Device Marking Notes： cosmo 1017 YWW Cosmo Electronics Corp. Document No. 69M00008.3 cosmo 1017 YWW -2- Y：Year code / W：Week code http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Absolute Maximum Ratings (Ta=25℃) Item Input Symbol Rating Unit Continuous forward current IF 50 mA Peak forward current IFP 1 A Reverse voltage VR 5 V Power dissipation Pin 100 mW - 1.3 mW/℃ Breakdown voltage VB 60 V Continuous load current IL 130 mA Pout 500 mW Viso 1500 Vrms Derate linearly from 25℃ Output Power dissipation Isolation voltage Isolation resistance (Vio=500V) 10 Ω ≧10 Riso Total power dissipation Pt 550 mW Derate linearly from 25℃ - 2.5 mW/℃ Operating temperature Topr -40 to +85 ℃ Storage temperature Tstg -40 to +125 ℃ Junction temperature Tj 100 ℃ Tsot 260 ℃ Soldering temperature 10 seconds Electro-optical Characteristics Parameter Input (Ta=25℃) Symbol Conditions Min. Typ. Max. Unit Forward voltage VF IF=10mA - 1.2 1.5 V Operation input current IFON VL=20V, IL=100mA - - 1.0 mA Recovery input voltage VFOFF VL=20V, IL≦5μA 0.5 - - V IB=50μA 60 - - V Breakdown voltage VB Output ILEAK VL=60V, IF=0mA - 0.2 1.0 μA I/O capacitance Ciso VB=0V, f=1MHz - 6 - pF ON resistance RON IF=10mA, IL=100mA - 7 16 Ω Turn-on time TON IF=10mA, VL=20V - 0.3 1.0 ms Turn-off time TOFF IL=100mA, t=10ms - 0.1 1.0 ms Off-state leakage current Turn-on / Turn-off Time Input 90% 10% Output TON Cosmo Electronics Corp. Document No. 69M00008.3 -3- TOFF http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Schematic and Wiring Diagrams Output Configuration Schematic 1 Load Connection Wiring Diagrams VIN 4 1a AC DC 1 4 IL 2 3 1 4 IF 3 Load I 2 Cosmo Electronics Corp. Document No. 69M00008.3 V L (AC,DC) Load VIN 2 IF -4- L V L (AC,DC) 3 http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Fig.2 On Resistance vs. Ambient Temperature 140 15 120 12 100 On Resistance (Ω) Load Current (mA) Fig.1 Load Current vs. Ambient Temperature 80 60 40 9 6 3 20 0 0 -40 -40 -20 0 20 40 60 80 -20 0 20 40 60 80 100 Ambient Temperature Ta (℃) Ambient Temperature Ta (℃) Fig.3 Turn-on Time vs. Ambient Temperature Fig.4 Turn-off Time vs. Ambient Temperature 1.0 1.0 Turn-off Time(ms) Turn-on Time (ms) 0.8 0.8 0.6 0.4 0.2 0.6 0.4 0.2 0 0 -40 -20 0 20 40 60 -40 80 Ambient Temperature Ta (℃) -20 0 20 40 60 80 Ambient Temperature Ta (℃) Fig.5 LED Operate Current vs. Ambient Temperature Fig.6 Output Capacitance vs. Applied Voltage 2.0 Output Capacitance (pF) LED Operate Current (mA) 2.5 1.5 1.0 0.5 0 -40 -20 0 20 40 60 40 30 20 10 0 80 0 10 20 30 40 60 80 Applied Voltage (V) Ambient Temperature Ta (℃) Cosmo Electronics Corp. Document No. 69M00008.3 50 -5- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Fig.7 LED Dropout Voltage vs. Ambient Temperature Fig.8 Voltage vs. Current Characteristics of Output at MOSFET Portion 1.7 50mA 30mA 20mA 10mA 1.5 1.3 Current (mA) LED Dropout Voltage (V) 1.9 5mA 1.1 0.9 0 -40 -20 0 20 40 60 80 Voltage (V) Ambient Temperature Ta (℃) Fig.9 Turn-on Time vs. LED Forward Current Fig.10 Off-state Leakage Current vs. Load Voltage Off-state Leakage Current (A) Turn-on Time (ms) 1.0 0.8 0.6 0.4 0.2 0 0 10 20 30 40 50 60 LED Forward Current (mA) Load Voltage (V) Fig.11 Turn-on Time vs. LED Forward Current 0.5 Turn-off Time (ms) 0.4 0.3 0.2 0.1 0 0 10 20 30 40 50 60 LED Forward Current (mA) Cosmo Electronics Corp. Document No. 69M00008.3 -6- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Using Methods Examples of resistance value to control LED forward current (IF=1mA) R E 1 4 2 3 E 3.3V 5V 12V 15V 24V R Approx. 1.5K Ω Approx. 3.0K Ω Approx. 8.7K Ω Approx. 11.2K Ω Approx. 18.7K Ω 1. LED forward current must be more than 1mA，at E min. 2. LED forward current must be less than 50mA，at E max. Emax. Emin. Regulate the spike voltage generated on the inductive load as follows： 1 4 2 3 1 4 2 3 Load Load R-C Snubber Cosmo Electronics Corp. Document No. 69M00008.3 -7- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Recommended Soldering Conditions (a) Infrared reflow soldering： Peak reflow soldering： 260℃ or below (package surface temperature) Time of peak reflow temperature: 10 sec Time of temperature higher than 230℃： 30-60 sec Time to preheat temperature from 60-120 sec 180~190℃： Two Number of reflows： Rosin flux containing small amount of chlorine Flux： (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 10 sec Max. temperature 260℃ 230℃ 190℃ 30-60 sec 180℃ 60-120 sec t (s) (b) Wave soldering： Temperature： 260℃ or below (molten solder temperature) Time： 10 seconds or less Preheating conditions: 120℃ or below (package surface temperature) Number of times： One Flux： Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions： Fluxes： Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Cosmo Electronics Corp. Document No. 69M00008.3 -8- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Numbering System KCP1017 (X) Note： KCP1017 = Part No. X = Tape and reel option ( TL、TR ) Option TL TR Description Packing quantity small outline for surface mount type package + 2000 units per reel TL tape & reel option small outline for surface mount type package + 2000 units per reel TR tape & reel option Recommended Pad Layout for Surface Mount Lead Form 0.8 2.54 1.2 6 Unit：mm Cosmo Electronics Corp. Document No. 69M00008.3 -9- http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo 4-pin SOP Carrier Tape & Reel Unit：mm 5.05±0.35 7.50 0.30 16.00±0.3 4.0 1.75 2.0 12.00 2.4±0.3 7.6±0.4 TOLERANCE：±0.2mm TL TR Direction of feed from reel Direction of feed from reel 1.5 16.4 Cosmo Electronics Corp. Document No. 69M00008.3 - 10 - 2.0 http://www.cosmo-ic.com KCP1017 Series 4PIN 60V N.O TYPE SOLID STATE RELAY-MOSFET OUTPUT cosmo Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from cosmo. Cosmo Electronics Corp. Document No. 69M00008.3 - 11 - http://www.cosmo-ic.com