PRODUCT SPECIFICATION DATE:03/08/2006 Rambo IC： cosmo PS201L-2V-1 ELECTRONICS CORPORATION NO. 60S01002 SHEET 1 OF 3 Package dimensions : Pin 1: Ground Pin 2: Vcc Pin 3: Output A Pin 4: Output B 470Ω IF=8mA E Power Max:0.6mW 10mm Notes 1) All dimensions are in millimeters. 2) Tolerance is ±0.25mm unless otherwise note. 3) Protruded resin under flange 0.5 mm Max. 4) Load spacing measured where the leads emerge from the package. VER. 2 PRODUCT SPECIFICATION DATE:03/08/2006 Rambo IC： cosmo ELECTRONICS CORPORATION NO. 60S01002 PS201L-2V-1 SHEET 2 OF 3 Absolute maximum ratings : (Ta=25℃, unless otherwise specified) Characteristics Supply voltage Symbol Vcc Other voltage Rating Unit -0.2 ~ 7 V -0.3 ~ Vcc +0.3 V Operating temperature Topr -20 ~ +75 ℃ Storage temperature Tstr -20 ~ +80 ℃ Soldering temperature 10 Second Tsol 260 ℃ Optical-electrical characteristics : (Ta=25℃, unless otherwise specified) Parameter Test Conditions Supply voltage Symbol Vcc Supply current Vcc=5.5V all output low Icc Output current Vcc=5V, Voh=4.5V Ioh Vcc=5V, Vol=0.5V Iol Timing chart : OUT-A OUT-B Min. 2.0 2.5 Typ. Max. Unit 5 5.5 V 0.1 3 μA -450 μA mA VER. 2 PRODUCT SPECIFICATION DATE:03/08/2006 cosmo ELECTRONICS CORPORATION Function Block Diagram Rambo IC： PS201L-2V-1 NO. 60S01002 SHEET 3 OF 3 REV. 2