SENSITRON SEMICONDUCTOR SCP-5285 TECHNICAL DATA PART NUMBER: SCP-5285, REV F AC SOLID STATE RELAY Features: Back-to-back SCR output for high reliability o 75A rating upto 85 C Base Plate Temperature 1600V Surge Voltage Withstand Capability Zero voltage Turn-ON Switching reduces EMC issues Panel Mount with Screw Terminals for easy assembly Similar to Teledyne SSR1600660D75 Electrical Characteristics Input Power Input Voltage Input Current at any input voltage Reverse Voltage Must Turn-off voltage Turn-off Current 4.5V ~ 32V DC 15 mA Typ -32V DC (max) 1.0V DC (max) 0.25 mA (max) Output Operating Voltage Frequency Range Output Current Peak Single cycle (upto 10 msec) Surge Min Load Current Transient Overvoltage (Vpk) Surge Current ON State Voltage Drop OFF State Leakage Current OFF State dv/dt @ 660VAC Turn-ON Time Turn-OFF Time 48V ~ 660V AC 47 Hz ~ 440 Hz o 75A max upto 85 C Base Plate Temperature 800A typ 100 mA RMS Up to 1600V 800 Apk for 16.6 msec (max) 1.85V @ 75A (max) 20 mA RMS (max) 1000 V/usec 8.3 msec @ 60 Hz or ½ cycle (max) 8.3 msec @ 60 Hz or ½ cycle (max) Physical Characteristics Temperature Operating Storage Hipot: input / output to case Tc = -55C to +85C Tc = -55C to +125C Up to 3000 V rms 1 minute minimum Cooling Power Dissipation Thermal Resistance (Junction to Case) 100W upto 85C base plate temperature o 0.3 C/W Others Case Dimensions Base Plate Material Terminals Construction See Drawing Copper Plate Floating Screw Type High Temperature Plastic Housing ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected] SENSITRON SEMICONDUCTOR SCP-5285 TECHNICAL DATA PART NUMBER: SCP-5285, Rev F Mechanical Dimensions: in mm (Inches) Electrical Block Diagram DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2013 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com [email protected]