SENSITRON SEMICONDUCTOR SHD119534 TECHNICAL DATA DATA SHEET 1180, REV. B HERMETIC POWER SCHOTTKY RECTIFIER Ultra Low Reverse Leakage DESCRIPTION: A 100 VOLT, 45 AMP, DUAL POWER SCHOTTKY RECTIFIERS IN A HERMETIC PACKAGE. MAXIMUM RATINGS ALL RATINGS ARE @ TJ = 25 C UNLESS OTHERWISE SPECIFIED. RATING PEAK INVERSE VOLTAGE O MAXIMUM DC OUTPUT CURRENT (@ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) SYMBOL MAX. UNITS PIV 100 Volts IO 45 Amps IFSM 200 Amps CT 1500 pF 1.07 C/W MAXIMUM THERMAL RESISTANCE R MAXIMUM OPERATING TEMPERATURE RANGE Top -65 to +200 C MAXIMUM STORAGE TEMPERATURE RANGE Tstg -65 to +175 C SYMBOL MAX. UNITS Vf 0.99 Volts JC ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (per leg, If = 45 Amps) TJ = 25 C 0.81 TJ = 125 C MAXIMUM REVERSE CURRENT (per leg, Ir @ 100 V PIV) TJ = 25 C TJ = 125 C Ir 0.3 mA 3.0 ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD119534 SENSITRON DATA SHEET 1180, REV. B MECHANICAL DIMENSIONS: In Inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) .140 (3.56)Typ. 1 .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) .625 (15.88) LCC-3P PINOUT TABLE DEVICE TYPE PIN 1 SINGLE RECTIFIER CATHODE Note: The Vf curves shown are for unpackaged die only. PIN 2 ANODE Typical Reverse Characteristics Typical Forward Characteristics 101 Instantaneous Reverse Current - I R (mA) 101 175 °C -1 10 200 °C 175 °C 0 10 150 °C 10-1 125 °C 100 °C 10-2 75 °C 10-3 50 °C 10-4 25 °C 10-5 125 °C 0 40 80 120 160 Reverse Voltage - RV (V) 200 240 Typical Junction Capacitance 25 °C 10-2 10-3 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop -FV(V) 1.0 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 200 °C 100 PIN 3 ANODE 120 80 40 0 0 40 80 120 160 Reverse Voltage - RV (V) 200 240 ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD119534 SENSITRON DATA SHEET 1180, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2012 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]