SE1L THRU SE6L SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere FEATURES * * * * * * * High reliability Low leakage Low forward voltage High current capability Super fast switching speed High surge capability Good for switching mode circuit SOD-123FL .114 (2.9) MECHANICAL DATA * * * * * .106 (2.7) Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.016 gram .035 (0.90) .077 (1.95) .028 (0.70) .069 (1.75) .008 (0.20) .039 (1.00) .035 (0.90) .150 (3.8) .142 (3.6) .052 (1.32) .050 (1.28) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. .033 (0.85) .033 (0.85) Single phase, half wave, 60 Hz, resistive or inductive load. .030 (0.75) For capacitive load, derate current by 20%. .044 (1.12) .030 (0.75) .043 (1.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL SE1L SE2L SE3L SE4L SE5L SE6L UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 Volts VDC 50 100 150 200 300 400 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55 OC IO 1.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 15 Amps Current Squarad Time I 2t 0.9 A 2/Sec Typical Thermal Resistance (Note 1) RqJA 130 0 C/W Typical Thermal Resistance (Note 1) RqJL 30 0 C/W Typical Junction Capacitance (Note 2) CJ Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range 15 10 pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 1.0A DC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C Maximum Reverse Recovery Time (Note 4) SE1L VF IR trr NOTES : 1. Thermal Resistance :Mounted on PCB. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant","100% Sn plating (Pb-free)". 4. Test Conditions: I F= 0.5A, I R= -1.0A, I RR= -0.25A. 5. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. SE2L SE3L SE4L 0.95 SE5L SE6L 1.25 5 UNITS Volts mA 350 mA 35 nSec 2010-05 REV: O RATING AND CHARACTERISTICS CURVES ( SE1L THRU SE6L ) 50 W NONINDUCTIVE (+) 25 Vdc (approx) (-) (-) D.U.T PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE trr +0.5A 10 W NONINDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. -1.0A 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR14/1 ns/cm AVERAGE FORWARD CURRENT, (A) 1.0 0.8 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.2 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, (OC) FIG.2 TYPICAL FORWARD CURRENT DERATING CURVE 175 INSTANTANEOUS REVERSE CURRENT, (uA) FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 1000 TA = 100 OC 100 TA = 75 OC 10 TA = 25 OC 1.0 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 140 PEAK FORWARD SURGE CURRENT, (A) 20 10 TJ = 25 OC 3.0 SE1L~SE4L 1.0 SE5L~SE6L 0.3 0.1 0.03 0.01 Pulse Width=300uS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 20 8.3ms Single Half Sine-Wave (JEDED Method) 10 5 3 2 1 1 5 INSTANTANEOUS FORWARD VOLTAGE, (V) 10 TJ = 25 OC 100 60 40 SE1L~SE4L 20 SE5L~SE6L 6 4 2 1 0.1 0.2 100 FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 10 50 NUMBER OF CYCLES AT 60Hz FIG.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( SE1L THRU SE6L ) 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.6 TYPICAL JUNCTION CAPACITANCE 100 Mounting Pad Layout .052 MIN. (1.32 MIN.) .033 MIN. (0.85 MIN.) .044 MIN. (1.12 MIN.) 0.165 (4.19) REF Dimensions in inches and (millimeters) .033 MIN. (0.85 MIN.) Marking Description Cathode Band S E X Part No. Voltage-code Y Year – code: (Y:Last digit of year& A:2010, B:2011……) W 1-------50V 2-------100V 3-------150V 4-----200V 5-----300V 6-----400V Week – code (W: A, week 01~02; B, week 03~04； C, week 05~06；……Z，week 51~52) PACKAGING OF DIODE AND BRIDGE RECTIFIERS REEL PACK PACKAGE SOD-123FL PACKING EA PER REEL CODE -W 2,500 COMPONENT TAPE SPACE SPACE(mm) (mm) --- --- REEL DIA CARTON SIZE 178 390*205*310 (mm) (mm) EA PER GROSS CARTON WEIGHT(Kg) 100,000 5.804 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.