HEAT SHRINK THIN WALL TUBING Q-200E 200°C, VERY FLEXIBLE MODIFIED FLUOROELASTOMER TUBING (Viton® ) SHRINK RATIO 2:1 Features/Applications cut-through resistance. Used for applications requiring high resistance to corrosive at high and low temperatures without cracking. Operating temperature: -55°C to +200°C Minimum shrink temperature: 150°C Full recovery temperature: 175°C Approval: UL VW-1, File No. E245010 Meets: SAE-AMS-DTL-23053/13 Standard Color: Black RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +200°C Tensile Strength ASTM D 2671 > 8.5 MPa Elongation at Break ASTM D 2671 > 250% Operating Temperature 250°C, 168 hrs. > 8MPa > 200% Heat Shock 300°C, 4 hrs. No cracking or dropping Flexibility ASTM D 412 < 13.8 MPa Dielectric Strength ASTM D 2671 > 7.9kV / mm Volume Resistance ASTM D 876 > 10 Ω.cm Elongation at Break After Aging Copper Corrosion Flammability 14 UL 224 No corrosion ASTM D 2671 Self-extinguish in 15 sec. Product Dimensions As Supplied (mm) Size Inch mm After Recovered (mm) Inside Diameter (min.) Inside Diameter (max.) Wall Thickness (min.) Tubing Shape Standard Spool *(SS) (Meter) Standard Packaging Cut to Length Pcs. *(QB) Qty per bag 6” 48” 1/8 3.2 3.2 1.6 0.76 Round 50 20 25 3/16 4.8 4.8 2.4 0.90 Round 50 16 25 1/4 6.4 6.4 3.2 0.90 Round 50 12 25 3/8 9.5 9.5 4.8 0.90 Round 50 8 25 1/2 12.7 12.7 6.4 1.10 Round 30 4 5 3/4 19.1 19.1 9.5 1.30 Round 30 2 5 1 25.4 25.4 12.7 1.65 Flat 30 1 5 1 1/2 38.1 38.1 19.1 1.90 Flat 15 1 5 2 50.8 50.8 25.4 2.80 Flat 15 1 5 Notes: 1. * See Part Number Guide for standard packaging codes.. 2. Cross Reference Guide available. 3. Special sizes, packaging, colors and cut pieces are available upon request. 4. Viton® is a registered trademark of E.I. Du Pont de Nemours and Co. Inc. www.Qualtekusa.com