HEAT SHRINK MEDIUM / HEAVY WALL - ADHESIVE LINED Q5-4X DUAL WALL, ADHESIVE LINED, FLEXIBLE POLYOLEFIN TUBING SHRINK RATIO 4:1 Features/Applications Heat shrinkable dual wall adhesive lined tubing is manufactured by co-extrusion sealing for protection against water and moisture of auto wires, shipping cables, metal tubes and bundled wires. Operating temperature: -55°C to +125°C Minimum shrink temperature: 80°C Full recovery temperature: 110°C Approvals 4 : File No. E236137, File No. 242540, 125°C, VW-1, 600V Meets: Sony-SS-00259, SAE-AMS-DTL-23053/4 Standard color: Black Special colors: Red, blue, white, yellow, clear RoHS Compliant Technical Data Property Test Method Typical Data IEC 216 -55°C to +125°C Tensile Strength ASTM D 2671 >12 MPa Ultimate Elongation ASTM D 2671 > 400% UL 224 0 ± 10% ASTM D 2671 < 40% 158°C, 168 hrs. > 11 MPa > 350 % Operating Temperature Longitudinal Shrinkage Eccentricity Heat Aging Tensile Strength Ultimate Elongation Flammability VW-1 Pass Voltage Withstand ASTM D 2671 / AC2500V. 1 min. No Breakdown Volume Resistance ASTM D 2671 >10 Ω.cm 14 Copper Stability UL 224 Pass Copper Corrosion UL 224 No Corrosion ASTM E28 95°C + 5°C Property of adhesive Ring-Ball Soft Point Product Dimensions As Supplied (mm) Size After Recovered (mm) Standard Packaging Cut to Length Standard Pcs. Spool *(QB) *(SS) Qty per bag (Meter) 6” 48” Inch mm Inside Diameter (min.) Inside Diameter (max.) Total Wall Thickness (min.) Adhesive Thickness (nom.) 3/16 4/1 4.0 1.0 1.00 0.5 100 24 25 1/4 6/1.5 6.0 1.5 1.00 0.5 100 20 25 5/16 8/2 8.0 2.0 1.00 0.5 50 18 25 1/2 12/3 12.0 3.0 1.40 0.6 25 14 5 5/8 16/4 16.0 4.0 1.60 0.8 25 14 5 1 24/6 24.0 6.0 2.15 0.8 25 12 5 1 1/4 32/8 32.0 8.0 2.40 1.0 25 8 5 2 52/13 52.0 13.0 2.40 1.0 - 5 5 Notes: 1. * See Part Number Guide for standard packaging codes.. 2. Cross Reference available. 3. Special sizes, packaging, colors and cut pieces are available upon request. www.Qualtekusa.com