Qualtek 60Watts Single Output P P C Electronics Corporation QPD-60 Series Features: Universal AC input/ Full range Wide Operating Ambient Temperature (-20°C~70°C) High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test Model QPD-60-5 QPD-60-12 QPD-60-15 QPD-60-24 QPD-60-48 Output Characteristics DC Output 5V 12V 15V 24V 48V Rated Current 10A 5A 4A 2.5A 1.25A Current Range 0~10A 0~5A 0~4A 0~2.5A 0~1.25A Ripple and Noise (-20~70°C) <50mV <50mV <100mV <100mV <200mV Voltage ADJ. Range 4.6V-5.5V 11.0V-13.0V 13.7V-16.0V 22.0V-25.3V 45.3V-51.3V Voltage Accuracy ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% Set-up Time <2.0s (115VAC input, full load); <1.0s (230VAC input, full load) Hold-up Time >10ms (115VAC input, full load); >20ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics Voltage Range 88VAC~264VAC, 124VDC~370VDC Frequency Range 47Hz-63Hz Efficiency 115VAC Input 75% 81% 81% 83% 84% (Typical) 230VAC Input 76% 82% 82% 83% 85% AC Current (max) 1.5A 1.5A 1.5A 1.5A 1.5A Inrush Current (Typical) 40A@115VAC Cold start 60A@230VAC Cold start Leakage Current <0.25mA@115VAC <3.5mA@230VAC Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery 120%~150% of rated output voltage, shut down, re-power on to recover (5V) Over Voltage (OVP) 110%~133% of rated output voltage, shut down, re-power on to recover (12V) 110%~140% of rated output voltage, shut down, re-power on to recover (15V, 24V) 110%~125% of rated output voltage, shut down, re-power on to recover (48V) Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -20°C~70°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C: 10%-95% RH Non-Condensing Safety Standards UL60950-1; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics Rev. B MTBF (MIL-HDBK-217F) More than 200,000Hrs (25°C, Full load) Dimension (LxWxH) 129x98x38mm Packing 30PCS/CTN. G.W: 14.2kgs Cooling Method Cooling by free air convection Page 1 of 2 60Watts Single Output Qualtek Electronics Corporation P P C QPD-60 Series MECHANICAL SPECIFICATIONS Pin No. 1 2 3 4.5 6.7 Assignment AC-N AC-L F.G DC output -V DC output +V DERATING CURVE UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2