OS10040280GW OS10040280GW GaAs Optical Receiver 40MHz to 1000MHz Package: SOT-115J The OS10040280GW is a hybrid high dynamic range optical receiver amplifier module. Two of the module pins are for connection to 24V (DC), one for amplifier supply voltage, the other for the PIN diode bias. The module contains a single mode optical input suitable for wavelengths from 1290nm to 1600nm, a terminal to monitor the PIN diode current, and an electrical output with an impedance of 75Ω. BIAS V+ Features ■ Superior Return Loss Performance ■ Extremely Low Distortion ■ Optimal Reliability ■ Low Noise ■ Standard CATV Outline ■ Excellent Flatness ■ 255mA Max. at 24V+ OUTPUT Applications OPTICAL INPUT ■ MONITOR 40MHz to 1000MHz CATV Amplifier Systems Ordering Information OS10040280GW-012 Box with 3 Pieces OS10040280GW-013 Box with 3 Pieces OS10040280GW-014 Box with 3 Pieces OS10040280GW-015 Box with 3 Pieces OS10040280GW-016 Box with 3 Pieces OS10040280GW-017 Box with 3 Pieces See Page 3 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. ® DS140310 ® RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc. 1 of 4 OS10040280GW Absolute Maximum Ratings Parameter Frequency Range Rating Unit 40 to 1000 MHz Optical Input Power (continuous) 5 mW 500 V Storage Temperature -40 to +85 °C Operating Mounting Base Temperature -20 to +85 °C Minimum Fiber Bending Radius 35 mm Maximum Tensile Strength 5 N ESD Sensitivity (Human Body Model; R = 1.5kΩ, C = 100pF) Caution! ESD sensitive device. RoHS (Restriction of Hazardous Substances): Compliant per EU Directive 2011/65/EU. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Nominal Operating Parameters Specification Parameter Unit Min Typ Condition Max V+ = 24V; TMB = 30°C; ZL = 75Ω General Performance Responsivity 1700 Slope Straight Line 1900 0 Flatness Straight Line 0.7 Optical Input Return Loss 45.0 Output Return Loss 15.0 V/W 2.0 dB f = 40MHz to 1000MHz 1.0 dB f = 40MHz to 1000MHz dB 17.0 Equivalent Input Noise 7.5 dB f = 40MHz to 1000MHz pA/ √Hz f = 40MHz to 1000MHz 0.85 A/W λ = (1310 ± 20)nm 0.90 A/W λ = (1550 ± 20)nm Spectral Sensitivity Optical Wavelength 1290 Total Current Consumption (DC) f = 1000MHz, λ = 1310nm 2100 245 PIN Diode Bias Current 1600 nm 255 mA 10.0 mA Total current into hybrid with both pins 4 and 5 connected to V+ = 24V V+ = 24V; TMB = 30°C; ZL = 75Ω Distortion Data Second Order Distortion[1] Third Order Distortion 1. 2. [2] -74.0 -72.0 dBc fm = 54MHz; f1 = 187.25MHz; f2 = 133.25MHz -70.0 -68.0 dBc fm = 446.5MHz; f1 = 97.25MHz; f2 = 349.25MHz -70.0 -67.0 dBc fm = 548.5MHz; f1 = 109.25MHz; f2 = 439.25MHz -66.0 -63.0 dBc fm = 746.5MHz; f1 = 133.25MHz; f2 = 613.25MHz -65.0 -62.0 dBc fm = 854.5MHz; f1 = 133.25MHz, f2 = 721.25MHz -80.0 -78.0 dBc fm = 55.25MHz; f1 = 109.25MHz; f2 = 133.25MHz; f3 = 187.25MHz -82.0 -80.0 dBc fm = 445.25MHz; f1 = 193.25MHz; f2 = 349.25MHz; f3 = 97.25MHz. -82.0 -80.0 dBc fm = 547.25MHz; f1 = 217.25MHz; f2 = 439.25MHz; f3 = 109.25MHz -80.0 -78.0 dBc fm = 745.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 613.25MHz -78.0 -76.0 dBc fm = 853.25MHz; f1 = 133.25MHz; f2 = 265.25MHz; f3 = 721.25MHz Two laser test; each laser with 40% OMI; Popt = 1mW (total). Three laser test; each laser with 60% OMI; Popt = 1mW (total). RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS140310 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 4 OS10040280GW Cable Lengths and Connector Types Tab Inches Dimension A Tolerance mm Tolerance Optical Connector Type -012 33.4 -4 to +0.5 848 -102 to +13 FC/APC -013 33.4 -4 to +0.5 848 -102 to +13 SC/APC -014 37.5 -3.5 to +0.5 952 -89 to +13 FC/APC -015 37.5 -3.5 to +0.5 952 -89 to +13 SC/APC -016 21.1 -1.5 to +0.5 536 -38 to +13 FC/APC -017 21.1 -1.5 to +0.5 536 -38 to +13 SC/APC Cable Lengths and Connector Types (continued) Tab Dimension B Inches mm -012 No outer jacket -013 No outer jacket -014 0.315 to 0.710 8.0 to 18.0 -015 0.315 to 0.710 8.0 to 18.0 -016 0.315 to 0.710 8.0 to 18.0 -017 0.315 to 0.710 8.0 to 18.0 RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS140310 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 4 OS10040280GW Package Drawing (Dimensions in millimeters) RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421 For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected]. DS140310 The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 4