RF1136 BROADBAND LOW POWER SP3T SWITCH Package Style: QFN, 12-Pin, 2.5 mm x 2.5 mm x 0.6 mm Features Low Frequency - 3.5 GHz Operations Very Low Insertion Loss: Cell Band 0.25 dB PCS Band 0.30 dB High Isolation: Cell Band 28 dB PCS Band 22 dB Compatible with Low Voltage Logic: (VHIGH = 1.8 V) Excellent Linearity Performance(IIP2): Cell Band 110 dBm PCS Band 110 dBm Lowest BOM Cost and Small Solution Size: No DC Blocking Capacitors Required on the RF Paths Applications Cellular Handset Applications Cellular Infrastructure Applications Functional Block Diagram Product Description The RF1136 is a single-pole three-throw (SP3T) switch designed for general purpose switching applications which require very low insertion loss and low power handling capability. The RF1136 is ideally suited for battery operated applications requiring high performance switching with very low DC power consumption. The RF1136 features very low insertion loss with excellent linearity performance down to 1.8 V control voltage. Additionally, RF1136 includes integrated decoding logic, allowing just two control lines needed for switch control. The RF1136 is packaged in a very compact 2.5 mm x 2.5 mm x 0.6 mm, 12-pin, leadless QFN package. Ordering Information RF1136 RF1136PCBA-410 Broadband Low Power SP3T Switch Fully Assembled Evaluation Board Optimum Technology Matching® Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MEMS LDMOS RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc. DS100826 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 9 RF1136 Absolute Maximum Ratings Parameter Rating Unit VDD, V1, V2 6.0 V Maximum Input Power (DC to 3.5 GHz, 1.8 V Control) 31 dBm Operating Temperature -30 to +85 °C RoHS status based on EU Directive 2002/95/EC (at time of this document revision). Storage Temperature -65 to +100 °C The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Parameter Min. Specification Typ. Max. Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. Unit Condition VDD = 2.6 V, V1, V2 = High = 1.8 V, V1 = V2 = Low = 0 V. Temp = 25°C. Operating Frequency 600 3500 MHz Insertion Loss RFC-RF1, RF2, RF3 0.25 0.35 dB RF ON, 50 MHz to 450 MHz 0.25 0.40 dB RF ON, 824 MHz to 960 MHz 0.30 0.50 dB RF ON, 1850 Mhz to 1990 MHz 0.40 0.55 dB RF ON, 2170 MHz to 2500 MHz 0.50 0.65 dB RF ON, 3500 MHz Isolation RF1-RF2. RF3 RFC-RF1, RF2, RF3 27 29 dB RF ON, 600 MHz 26 28 dB RF ON, 824 MHz to 960 MHz 20 22 dB RFON, 1850 MHz to 1990 MHz 19 21 dB RF ON, 2170 MHz to 2500 MHz 16 18 dB RF ON, 3500 MHz 27 29 dB RF ON, 600 MHz 26 28 dB RF ON, 824 MHz to 960 MHz 20 22 dB RFON, 1850 MHz to 1990 MHz 19 21 dB RF ON, 2170 MHz to 2500 MHz RF Port Return Loss VSWR 1.5:1 880 MHz Harmonics Second Harmonic 75 90 dBc PIN = 16 dBm; F0 = 880 MHz Third Harmonic 81 97 dBc PIN = 16 dBm; F0 = 880 MHz 1880 MHz Harmonics Second Harmonic 85 96 dBc PIN = 16 dBm; F0 = 1880 MHz Third Harmonic 79 93 dBc PIN = 16 dBm; F0 = 1880 MHz 2500 MHz Harmonics Second Harmonic 85 96 dBc PIN = 16 dBm; F0 = 2500 MHz Third Harmonic 79 93 dBc PIN = 16 dBm; F0 = 2500 MHz RF1, RF2, RF3-ANT Cell 107 110 dBm Tone 1: 836.5 MHz at 16 dBm, Tone 2: 1718 MHz at -20 dBm, Receive Freq: 881.5 MHz RF1, RF2, RF3-ANT AWS 108 110 dBm Tone 1: 1732.5 MHz at 16 dBm, Tone 2: 3865 MHz at -20 dBm, Receive Freq: 2132.5 MHz RF1, RF2, RF3-ANT PCS 108 110 dBm Tone 1: 1880 MHz at 16 dBm, Tone 2: 3840 MHz at -20 dBm, Receive Freq: 1960 MHz IIP2 2 of 9 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090630 RF1136 Min. Specification Typ. RF1, RF2, RF3-ANT Cell 62 64 dBm Tone 1: 836.5 MHz at 16 dBm, Tone 2: 791.5 MHz at -20 dBm, Receive Freq: 881.5 MHz RF1, RF2, RF3-ANT IMT 61 63 dBm Tone 1: 1950 MHz at 16 dBm, Tone 2: 1760 MHz at -20 dBm, Receive Freq: 2140 MHz Parameter Max. Unit Condition IIP3 Input Power at 0.1 dB Compression Point 27 dBm Switching Speed 0.5 2 us 10% to 90% RFon, 90% to 10% RFoff. DC Supply VDD 2.50 2.6 3.30 V V1 and V2 (H) 1.30 1.80 2.90 V V1 and V2 (L) 0.00 Supply Current Control Current Rev A1 DS090630 650 0.40 V 800 uA 40 uA 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 9 RF1136 Pin 1 2 3 4 5 6 7 8 9 10 11 12 PKG BASE Function VDD V2 V1 GND RF3 GND ANT GND RF1 GND RF2 GND GND Description Supply Control Signal 2 Contol Signal 1 Ground RF Output 3 Ground RF input. Connected to antenna. Ground RF Output 1 Ground RF Output 2 Ground Ground Pin Out 4 of 9 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090630 RF1136 Package Drawing Rev A1 DS090630 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 5 of 9 RF1136 General Information Control Logic The switch is operable in three states (see Truth table, below). The switch is designed for two modes: Active and Stand-by. These modes are controlled by the VDD signal. When VDD is high, the switch is active. Control Logic Mode V1 V2 S1 S2 S3 ANT-RF1 High Low ON OFF OFF ANT-RF2 Low High OFF ON OFF ANT-RF3 Low Low OFF OFF ON Electrical Test Methods The electrical parameters for the switch were measured on test Evaluation Board provided by the switch supplier. The test Evaluation Board includes means for decoupling RF signals from control signal port (shunt capacitor at control signal ports). All measurements are done with calibration plane at switch pins. The effect of test board losses and phase delay has been removed from the results. 6 of 9 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090630 RF1136 Application Schematic Application Diagram and Guidelines The decoupling capacitors are optional and, if necessary, may be used for noise reduction. Decoupling capacitors on the control pins protect the control circuitry from possible RF leakage. DC Blocking capacitors are not needed on the RF paths as there is no DC on the RF paths, however care should be taken to ensure that DC is not injected into the switch from external circuitry. An ESD filter is needed to protect the switch from antenna ESD events. The filter is formed by LESD inductor and CESD capacitor. The switch has a supply input to feed the built-in logic decoding. *LESD value will depend on the level of ESD protection and the loss acceptable in a given application. Pin 13 is the package base and should be grounded as shown on the evaluation board for best performance. Rev A1 DS090630 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 7 of 9 RF1136 Evaluation Board Layout Board Thickness 0.0658”, Board Material FR-4 Component Layer 8 of 9 Topside RF Layer 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. Rev A1 DS090630 RF1136 Typical Performance Data on Evaluation Board: Fixture losses have been de-embedded (Temp = 25°C, VDD = 2.6 V, V1 = V2 = High = 1.8 V, V1 = V2 = Low = 0 V). Rev A1 DS090630 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 9 of 9