"High Frequency Ceramic Solutions" 915 MHz ISM Antenna for small form factor applciations Detail Specification: General Specifications Part Number Frequency (MHz) Peak Gain (XZ-total) Average Gain (XZ-total) Return Loss 0915AT43A0026 902 - 928 Mhz -1.0 dBi typ. -4.0 dBi typ. 8.5 dB min. Packing Style Evaluation Board 0.276 0.079 0.031 0.020 Input Power Operating Temperature Recommended Storage Conditions Reel Quanity Bulk (loose) Suffix = S T&R Suffix = E 100% Tin Suffix = E or S 0915AT43A0026-EB1SMA Mechanical Dimensions L W T a Page 1 of 4 Recommended Application ISM Part Number Explanation P/N Suffix P/N 0915AT43A0026 6/22/2015 In ± 0.008 ± 0.008 ± +.004/-.008 ± 0.012 7.00 2.00 0.80 0.50 2W max. (CW) -40 to +85°C +5 to +35°C, Humidity 45~75%RH 1,000 eg. 0915AT43A0026S eg. 0915AT43A0026E eg. 0915AT43A0026(E or S) Terminal Configuration No. Function Feeding Point 1 NC* 2 mm ± 0.20 ± 0.20 ± +0.1/-0.2 ± 0.30 a T L 2 1 *This terminal must be soldered for anchoring and functionality purposes Mounting Considerations I Mount these devices with maroon mark facing up. *Line width should be designed to provide 50 Ω impedance matching characteristics. Matching circuit**: See Note 2 on next page! 1.0 6.0 GND Plane 10 nH * 1.8 4.7 nH 0.5 pF 0.5 GND Plane All units in: mm Want the layout file of this? Send us a message at: www.johansontechnology.com/component/techquestion JTI P/N for Matching Circuit:** Inductor (4.7nH):L-07C4N7SV6T Inductor (10nH): L-07C10NJV6T Cap (0.5pF): 500R07S0R5BV4T 8.0 5.0 2.5 7.0 **matching circuit and component values will depend on PCB layout, thickness, material, etc. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 915 MHz ISM Antenna for small form factor applciations Detail Specification: P/N 0915AT43A0026 Page 2 of 4 6/22/2015 Recommended Application ISM Mounting Considerations II 9.5mm 40mm 50Ω Feed Line (make sure proper calculation are applied to achieve this. GND Plane 20mm Johanson Test Board (orderable) p/n: 0915AT43A0026-EB1SMA Yellow areacomplete GND and layer clearance free of metal below and above. GND Plane 19mm (can be shortened as needed, won't influence performance) **Note 2: It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values above are used when antenna is mounted on Johanson's evaluation board. The matching values on client’s PCB will be different. Go to: http://johansontechnology.com/tuning and see how to obtain the new values. If you need further help, such as needing the layout file of the above, contact our RF Applications Eng. Team at: http://www.johansontechnology.com/component/techquestion/ Return Loss (with matching) 0 -5 m1 freq=902.0MHz dB(S(1,1))=-11.217 m2 freq=928.0MHz dB(S(1,1))=-11.807 m3 freq=915.0MHz dB(S(1,1))=-43.257 m1m2 -10 dB(S(1,1)) -15 -20 -25 -30 -35 -40 -45 0.5 m3 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 915 MHz ISM Antenna for small form factor applciations Detail Specification: P/N 0915AT43A0026 Page 3 of 4 6/22/2015 Typical Radiation Performance @ 25° C using 0915AT43A0026-EB1SMA Typical Radiation Patterns XY-V/XY-H Z ) Recommended Application ISM XY cut @915MHz Vertical Horizontal 180° X 270° 90° Y 0° XZ-V/XZ-H XY-cut scanning direction XZ cut @915MHz Vertical Horizontal Y 180° X 270° 90° Z 0° XZ-cut scanning direction YZ cut @915MHz Vertical Horizontal YZ-V/YZ-H X ) 180° Y 270° 90° Z 0° YZ-cut scanning direction Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2013 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 915 MHz ISM Antenna for small form factor applciations P/N 0433AT62A0020 Page 4 of 4 Detail Specification: 6/22/2015 More SMD Chip Antennas at: Packaging information Soldering Information www.johansontechnology.com/antennas www.johansontechnology.com/ipcpackaging.html www.johansontechnology.com/ipcsoldering-profile Antenna layout and tuning techniques (How to obtain the new antenna matching values) www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices RoHS Compliance www.johansontechnology.com/technical-notes/rohs-compliance.html MSL Info www.johansontechnology.com/technical-notes/msl-rating.html P/N Explanation and Breakdown www.johansontechnology.com/ipc-pn-explained Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 2.1 2014 Johanson Technology, Inc. All Rights Reserved