High Frequency Ceramic Solutions 900MHz 1:1 RF Balun, EIA 0805 with DC-Feed Feature P/N 0900BL15C050 Detail Specification: 9/17/2014 Page 1 of 4 General Specifications Part Number 0900BL15C050 Frequency 800 - 1000 (MHz) Amplitude Difference 2.0 dB max. Operating Temperature -40 to +85°C Unbalanced Impedance 50 Ω Storage Temperature Differential Balanced Imp. 50 Ω Power Capacity Insertion Loss 0.9dB Typ (1.2 dB max.) Return Loss 11dB Typ (9.5 dB min.) Phase Difference 180 ± 10 deg. Part Number Explanation Packing Style P/N Suffix Termination style Evaluation Board -40 to +85°C 3 W max. (CW) Recommended Storage Conditions of unused product on T&R +5 to +35°C, 18 mos. max. Humidity 45~75% RH Bulk Suffix = S Eg. 0900BL15C050S T&R Suffix = E Eg. 0900BL15C050E (4000 pcs/reel) 100% Tin Suffix = None Eg. 0900BL15C050 (E or S) eg.0900BL15C050-EB1SMA (2 port back-to-back EVB) eg. 0900BL15C0500-EB2SMA (3 port standard EVB) You can download measured s-parameters of this component at: http://www.johansontechnology.com/rfbaluns In L W T a b c g p Mechanical Dimensions Terminal Configuration mm 0.079 ± 0.004 0.049 ± 0.004 2.00 ± 0.10 1.25 ± 0.10 0.028 ± 0.004 0.012 ± 0.004 0.70 ± 0.10 0.30 ± 0.10 0.008 ± 0.004 0.012 +0.004/0.008 0.20 ± 0.10 0.30 +0.1/-0.2 0.014 ± 0.004 0.026 ± 0.002 0.35 ± 0.10 0.65 ± 0.05 W L a c p T g Mounting Considerations 0.35 b 1 Unbalanced Port (IN) 2 GND or DC Feed+RF GND 3 Balanced Port (OUT2) 4 Balanced Port (OUT1) 5 GND 0.35 DC-Feed 56pF 0.8 5 4 1 2 3 to provide 50ohm impedance 1.0 0.8 6 *Line width should be designed * 1.0 NC Mount these devices with colored mark facing up. No DC-Feed * 6 Solder Land Through-hole (Ф0.3) 0.30 0.30 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2014 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 900MHz 1:1 RF Balun, EIA 0805 with DC-Feed Feature P/N 0900BL15C050 Detail Specification: 9/17/2014 Page 2 of 4 Equivalent Circuit for 0900BL15C050 -Pin3 and Pin4 are DC connected to Pin2 (GND or DC feed) in the device but not DC connected to Pin5 (GND). Therefore by-pass capacitors should be connected when feeding DC power from Pin2. Unbalanced port does not have a direct current path to GND Use 56pF RF GND cap when using DC-Feed option Balanced Port (OUT2) Balanced Port (OUT1) 56pF Need our help laying this out for you? Need the layout file? Send us a message at: www.johansontechnology.com/component/techquestion Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2014 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 900MHz 1:1 RF Balun, EIA 0805 with DC-Feed Feature P/N 0900BL15C050 Detail Specification: 9/17/2014 Page 3 of 4 Typical Electrical Characteristics (T=25°C) Insertion Loss and Return Loss (Sds12 and Sss11) 0 dB(IL) -5 dB(RL)-10 -15 -20 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Balanced Port (OUT2) Amplitude and Phase Balance 2.0 1.5 200 195 Balanced Port (OUT1) 190 (dB) (dif_amplitude) 1.0 0.5 0.0 (dB) -0.5 -1.0 185 180 (dif_phase) 175 170 -1.5 165 -2.0 160 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2014 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 900MHz 1:1 RF Balun, EIA 0805 with DC-Feed Feature P/N 0900BL15C050 Detail Specification: 9/17/2014 Page 4 of 4 More Filter-Balun info such as s-parameters and other frequencies at: http://www.johansontechnology.com/rfbaluns Packaging information Soldering Information MSL Info www.johansontechnology.com/ipcpackaging.html www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/technical-notes/msl-rating.html Recommneded Storage Condition and Max Shelf Life www.johansontechnology.com/ipcstorage-shelflife RoHS Compliance www.johansontechnology.com/technical-notes/rohs-compliance.html Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices Balanced Port (OUT1) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2014 Johanson Technology, Inc. All Rights Reserved