0433BM41A0019 - Johanson Technology

"High Frequency Ceramic Solutions"
433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive
Component for SiLabs Si4455 and Si4460 Chipsets
Detail Specification:
P/N 0433BM41A0019
5/1/2015
General Specifications
Part Number
Frequency Range(MHz)
Balanced Impedance
Unbalanced impedance
Page 1 of 5
0433BM41A0019
424-444
Si4455, Si4460
50Ω (single ended)
Average Insertion Loss when
0.9dB [email protected]
connected to Si44XX chipset (Active
1.5dB max. (-45 to +85C)
OP Tx/Rx)
Insertion Loss when component
1.6dB Typ in Rx, 1.4dB Typ in Tx @25C
measured by itself (passive
2.2dB max. in Rx, 1.9dB max. in Tx (-45 to +85C)
insertion
180° ± 10
35 min. @ 2xfo MHz
35 min. @ 3xfo MHz
35 min. @ 4xfo MHz
35 min. @ 5xfo MHz
Phase Diff. (deg.)
Attenuation
dB (min.)
2.0 max.
2.0 max.
4,000
-40 to +85°C
VSWR @ BW
Amplitude Difference (dB)
Reel Quanity
Operating Temperature
Recommended Storage
Conditions for Unused
product on T&R
Input Power
+5 ~ +35 °C, Humidity
45~75%RH, 18 months.
500mW max. (CW)
Download the gerber files at: www.johansontechnology.com/silabs
Part Number Explanation
P/N Suffix
Packing Style
Termination style
Mechanical Dimensions
In
0.126 ± 0.008
L
0.098 ± 0.008
W
0.059 ± 0.006
T
0.022 ± 0.006
a1
0.028 ± 0.008
a2
0.004 min.
b
0.012 + 0.008
c
0.018 + 0.006
g
0.039 + 0.008
p
Bulk
T&R
Ni/Sn
Suffix = S
Suffix = E
Suffix = None
Terminal Configuration
No.
No.
Function
GND
1
5
Ant
2
6
3
7
GND
4
8
GND
mm
3.20 ± 0.20
2.50 ± 0.20
1.50 ± 0.15
0.55 ± 0.15
0.70 ± 0.20
0.1 min.
0.30 + 0.20
0.45 + 0.15
1.00 + 0.20
a2

T
c
Unit :mm
g

  
W
L
Function
GND
TX
RXN
RXP
  

p
a1
eg. 0433BM41A0019S
eg. 0433BM41A0019E
eg. 0433BM41A0019(E or S)
b
DC Connection for Pins
(1) Pin1 – Pin3 – Pin4 – Pin5
(2) Pin2 – Pin7– Pin8
Do you need to download the reference design/layout files?
Go to: www.johansontechnology.com/SiLabs
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
Ver 1.1
2015 Johanson Technology, Inc. All Rights Reserved
"High Frequency Ceramic Solutions"
433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive
Component for SiLabs Si4455 and Si4460 Chipsets
P/N 0433BM41A0019
5/1/2015
Detail Specification:
Page 2 of 5
Mounting Considerations
*
Line/Via width should be designed to match 50Ohm characteristic impedance, depending on PCB material
and thickness.
Download gerber files at: www.johansontechnology.com/silabs
*
*
Solder Resist
Land
Through-hole ( 0.3)
Do you need the layout/gerber files of the above? Go to: www.johansontechnology.com/silabs or send us a message at:
http://www.johansontechnology.com/component/techquestion
Measuring Diagram
Rx Mode
Tx Mode
Port3
Network
Analyzer*
Port2
Port3
Network
Analyzer*
Port2
Port 4
Port 1
Port 4
Port 1
(42.2-j81.6 )
(50 )
(3.5k // 1.65pF )
(50 )
GND GND
GND
GND GND
GND
GND
GND
Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications
and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
Ver 1.1
2015 Johanson Technology, Inc. All Rights Reserved
"High Frequency Ceramic Solutions"
433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive
Component for SiLabs Si4455 and Si4460 Chipsets
Detail Specification:
P/N 0433BM41A0019
5/1/2015
Page 3 of 5
Measuring Diagram (cont. )
Tx Mode:
Port1: Antenna Port
Port1 Terminate impedance: 50ohm
Ports 2 and 3: Rx Balanced Port
Port 2 and 3 Terminate impedance:
1/2 x (the loading impedance ZIC,RX
off of Si4455)
Port4: Tx Port
Port4 Terminate impedance:
Complex conjugate to ZIC,TX on of
Si4455
RXMode:
Port 1: Antenna Port
Port1 Terminate impedance: 50ohm
Ports 2 and 3: Rx Balanced Port
Port 2 and 3 Terminate impedance:
Complex conjugate to 1/2 x (Balance
impedance of ZIC,RX on of Si4455)
Port4: Tx Port
Port4 Terminate impedance: The loading
impedance ZIC,TX off of Si4455
IL=Sds21
RL=Sss11 / Sdd22
Amp_balance = dB(S(3,1)/S(2,1))
IL = S41
RL = S11 / S44
Typical Electrical Characteristics (T=25oC)
TX mode: Insertion and Return Loss
0
-10
RL_S44
RL_S11
IL_S41
-20
-30
-40
-50
-60
0.3
1.3
2.3
3.3
freq, GHz
Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications
and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
Ver 1.1
2015 Johanson Technology, Inc. All Rights Reserved
"High Frequency Ceramic Solutions"
433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive
Component for SiLabs Si4455 and Si4460 Chipsets
P/N 0433BM41A0019
5/1/2015
Detail Specification:
Page 4 of 5
Typical Electrical Characteristics (T=25oC)
RX mode: Insertion and Return Loss
0
RL_Sdd22
RL_Sss11
IL_Sds21
-10
-20
-30
-40
-50
RX mode: -60
0.3
1.3
3.3
freq, GHz
2
200
1
100
0
0
-1
-2
350
-100
380
410
440
470
Phase_diff
Amp_diff
Amplitude and Phase Balance
2.3
-200
500
freq, MHz
Johanson Technology, Inc. reserves the right to make design changes without notice. Please confirm the specifications
and delivery conditions when placing your order. All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
Ver 1.1
2015 Johanson Technology, Inc. All Rights Reserved
"High Frequency Ceramic Solutions"
433 MHz Impedance Matched Balun + LPF Integrated Front-End SMD Passive
Component for SiLabs Si4455 and Si4460 Chipsets
Detail Specification:
P/N 0433BM41A0019
5/1/2015
Page 5 of 5
Application Notes, Layout Files, and more
www.johansontechnology.com/silabs
RoHS Compliance
www.johansontechnology.com/technical-notes/rohs-compliance.html
Soldering Information
www.johansontechnology.com/ipcsoldering-profile
Antenna layout and tuning techniques
www.johansontechnology.com/tuning
Antenna layout review, tuning, and characterization services
www.johansontechnology.com/ipcantennaservices
MSL Info
www.johansontechnology.com/technical-notes/msl-rating.html
Recommneded Storage Condition and Max Shelf Life
www.johansontechnology.com/ipcstorage-shelflife
Packaging information
www.johansontechnology.com/ipcpackaging.html
Johanson Technology, Inc. reserves the right to make design changes without notice.
All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821
Ver 1.1
2015 Johanson Technology, Inc. All Rights Reserved