MAXIM MAX5078_12

MAX5078
4A, 20ns, MOSFET Driver
General Description
The MAX5078A/MAX5078B high-speed MOSFET drivers
source and sink up to 4A peak current. These devices
feature a fast 20ns propagation delay and 20ns rise and
fall times while driving a 5000pF capacitive load.
Propagation delay time is minimized and matched
between the inverting and noninverting inputs. High
sourcing/sinking peak currents, low propagation delay,
and thermally enhanced packages make the MAX5078A/
MAX5078B ideal for high-frequency and high-power
circuits.
The MAX5078A/MAX5078B operate from a 4V to 15V
single power supply and consume 40µA (typ) of supply
current when not switching. These devices have an
internal logic circuitry that prevents shoot-through during
output state changes to minimize the operating current
at a high switching frequency. The logic inputs are protected against voltage spikes up to +18V, regardless of
the VDD voltage. The MAX5078A has CMOS input logic
levels while the MAX5078B has TTL-compatible input
logic levels.
The MAX5078A/MAX5078B feature both inverting and
noninverting inputs for greater flexibility in controlling the
MOSFET. They are available in a 6-pin TDFN (3mm x
3mm) package and operate over the automotive temperature range of -40°C to +125°C.
Applications
Power MOSFET Switching
Motor Control
Switch-Mode Power Supplies
Power-Supply Modules
Features
o
o
o
o
o
o
o
o
o
o
o
4V to 15V Single Power Supply
4A Peak Source/Sink Drive Current
20ns (typ) Propagation Delay
Matching Delay Between Inverting and
Noninverting Inputs
VDD / 2 CMOS (MAX5078A)/TTL (MAX5078B) Logic
Inputs
0.1 x VDD (CMOS) and 0.3V (TTL) Logic-Input
Hysteresis
Up to +18V Logic Inputs (Regardless of VDD
Voltage)
Low Input Capacitance: 2.5pF (typ)
40µA (typ) Quiescent Current
-40°C to +125°C Operating Temperature Range
6-Pin TDFN Package
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX5078AATT+
-40°C to +125°C
6 TDFN-EP*
MAX5078AATT/V+
-40°C to +125°C
6 TDFN-EP*
MAX5078BATT+
-40°C to +125°C
6 TDFN-EP*
MAX5078BATT/V+
-40°C to +125°C
6 TDFN-EP*
*EP = Exposed pad.
+Denotes a lead(Pb)-free/RoHS-compliant package.
*EP = Exposed pad.
/V denotes an automotive qualified part.
Note: Devices are also available in a tape-and-reel package. Specify
tape and reel by adding "T" to the part number when ordering.
DC-DC Converters
Selector Guide
PART
PIN-PACKAGE
LOGIC INPUT
MAX5078AATT
6 TDFN-EP
VDD / 2 CMOS
MAX5078BATT
6 TDFN-EP
TTL
Pin Configuration
Typical Operating Circuit
TOP VIEW
4V TO 15V
MAX5078
VDD
+
IN- 1
MAX5078A
MAX5078B
OUT
IN+
PWM IN
IN-
N
6
IN+
2
5
OUT
GND 3
4
VDD
GND
GND
TDFN-EP
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-3346; Rev 2; 9/12
MAX5078
4A, 20ns, MOSFET Driver
ABSOLUTE MAXIMUM RATINGS
Continuous Power Dissipation (TA = +70°C)
6-Pin TDFN-EP (derate 18.2mW/°C above +70°C)........1454mW
Operating Temperature Range..............................-40°C to +125°C
Storage Temperature Range .................................-65°C to +150°C
Junction Temperature ...........................................................+150°C
Lead Temperature (soldering, 10s)......................................+300°C
Soldering Temperature (reflow)............................................+260°C
(Voltages referenced to GND.)
VDD...............................................................................-0.3V to +18V
IN+, IN- ........................................................................-0.3V to +18V
OUT .................................................................-0.3V to (VDD + 0.3V)
OUT Short-Circuit Duration.......................................................10ms
Continuous Source/Sink Current at OUT_ (PD < PDMAX) .....200mA
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 1)
Junction-to-Ambient Thermal Resistance (θJA)...............42°C/W
Junction-to-Case Thermal Resistance (θJC)......................9°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer
board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS
(VDD = 4V to 15V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at VDD = 15V and TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
15
V
3.5
3.85
V
POWER SUPPLY
VDD Operating Range
VDD Undervoltage Lockout
VDD
UVLO
4
VDD rising
3.00
VDD Undervoltage Lockout
Hysteresis
VDD Undervoltage Lockout to
Output Delay
VDD Supply Current
VDD rising
IDD
IDD-SW
VIN+ = 0V, IN- = VDD
(not switching)
200
mV
12
µs
VDD = 4V
28
55
VDD = 15V
40
75
1.2
2.2
1.8
Switching at 250kHz, CL = 0
0.5
µA
mA
DRIVER OUTPUT (SINK)
Driver Output Resistance Pulling
Down
Peak Output Current (Sinking)
RON-N
IPK-N
Output-Voltage Low
Latchup Protection
VDD = 15V,
IOUT = -100mA
TA = +25°C
1.1
TA = +125°C
1.5
2.4
VDD = 4.5V,
IOUT = -100mA
TA = +25°C
2.2
3.3
TA = +125°C
3.0
4.5
VDD = 15V, CL = 10,000pF
IOUT = -100mA
ILUP
4
A
VDD = 4.5V
0.45
VDD = 15V
0.24
Reverse current IOUT (Note 2)
Ω
400
V
mA
DRIVER OUTPUT (SOURCE)
Driver Output Resistance Pulling
Up
Peak Output Current (Sourcing)
2
RON-P
IPK-P
VDD = 15V,
IOUT = 100mA
TA = +25°C
1.5
2.1
VDD = 4.5V,
IOUT = 100mA
TA = +125°C
1.9
2.75
TA = +25°C
2.75
4
TA = +125°C
3.75
5.5
VDD = 15V, CL = 10,000pF
4
Ω
A
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
ELECTRICAL CHARACTERISTICS (continued)
(VDD = 4V to 15V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at VDD = 15V and TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
Output-Voltage High
CONDITIONS
MIN
VDD = 4.5V
VDD 0.55
VDD = 15V
VDD 0.275
IOUT = 100mA
TYP
MAX
UNITS
V
LOGIC INPUT (Note 3)
Logic 1 Input Voltage
VIH
MAX5078A
MAX5078B (Note 4)
Logic 0 Input Voltage
Logic-Input Hysteresis
VIL
VHYS
Logic-Input-Current Leakage
Input Capacitance
0.7 x
VDD
V
2.1
MAX5078A
0.3 x
VDD
MAX5078B
0.8
MAX5078A
0.1 x
VDD
MAX5078B
0.3
VIN+ = VIN- = 0V or VDD
-1
CIN
+0.1
V
V
+1
2.5
µA
pF
SWITCHING CHARACTERISTICS FOR VDD = 15V (Figure 1)
OUT Rise Time
OUT Fall Time
tR
tF
CL = 1000pF
4
CL = 5000pF
18
CL = 10,000pF
32
CL = 1000pF
4
CL = 5000pF
15
CL = 10,000pF
26
ns
ns
Turn-On Delay Time
tD-ON
CL = 10,000pF (Note 2)
10
20
34
ns
Turn-Off Delay Time
tD-OFF
CL = 10,000pF (Note 2)
10
20
34
ns
SWITCHING CHARACTERISTICS FOR VDD = 4.5V (Figure 1)
OUT Rise Time
OUT Fall Time
tR
tF
CL = 1000pF
7
CL = 5000pF
37
CL = 10,000pF
85
CL = 1000pF
7
CL = 5000pF
30
CL = 10,000pF
75
ns
ns
Turn-On Delay Time
tD-ON
CL = 10,000pF (Note 2)
18
35
70
ns
Turn-Off Delay Time
tD-OFF
CL = 10,000pF (Note 2)
18
35
70
ns
Maxim Integrated
3
MAX5078
4A, 20ns, MOSFET Driver
ELECTRICAL CHARACTERISTICS (continued)
(VDD = 4V to 15V, TA = -40°C to +125°C, unless otherwise noted. Typical values are at VDD = 15V and TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
MATCHING CHARACTERISTICS
Mismatch Propagation Delays from
Inverting and Noninverting Inputs to
Output
Note 1:
Note 2:
Note 3:
Note 4:
∆tON-OFF
VDD = 15V, CL = 10,000pF
2
VDD = 4.5V, CL = 10,000pF
4
ns
All devices are 100% tested at TA = +25°C. Specifications over -40°C to +125°C are guaranteed by design.
Limits are guaranteed by design, not production tested.
The logic-input thresholds are tested at VDD = 4V and VDD = 15V.
TTL compatible with reduced noise immunity.
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
TA = +125°C
TA = +25°C
20
40
30
TA = +25°C
20
10
TA = -40°C
6
8
10
12
14
10
12
14
TA = +25°C
30
20
TA = -40°C
6
DUTY CYCLE = 50%
VDD = 15V, CL = 0
5
4
500kHz
2
1
0
6
8
10
12
SUPPLY VOLTAGE (V)
14
16
MAX5078 toc03
12
14
16
80
70
1MHz
60
50
500kHz
40
30
50kHz
100kHz
10
0
0
4
10
DUTY CYCLE = 50%
VDD = 15V, CL = 4700pF
90
20
50kHz
100kHz
8
SUPPLY CURRENT vs. SUPPLY VOLTAGE
1MHz
3
6
100
SUPPLY CURRENT (mA)
MAX5078 toc04
40
TA = -40°C
4
16
MAX5078 toc05
IDD-SW SUPPLY CURRENT
vs. SUPPLY VOLTAGE
TA = +125°C
20
SUPPLY VOLTAGE (V)
PROPAGATION DELAY TIME,
HIGH-TO-LOW vs. SUPPLY VOLTAGE
(CL = 5000pF)
IDD-SW SUPPLY CURRENT (mA)
PROPAGATION DELAY (ns)
8
SUPPLY VOLTAGE (V)
10
4
6
SUPPLY VOLTAGE (V)
60
50
4
16
TA = +25°C
30
0
0
4
40
10
10
TA = -40°C
0
TA = +125°C
50
PROPAGATION DELAY (ns)
50
FALL TIME (ns)
RISE TIME (ns)
TA = +125°C
40
60
MAX5078 toc02
50
30
60
MAX5078 toc01
60
PROPAGATION DELAY TIME,
LOW-TO-HIGH vs. SUPPLY VOLTAGE
(CL = 5000pF)
FALL TIME vs. SUPPLY VOLTAGE
(CL = 5000pF)
MAX5078 toc06
RISE TIME vs. SUPPLY VOLTAGE
(CL = 5000pF)
4
6
8
10
12
SUPPLY VOLTAGE (V)
14
16
4
6
8
10
12
14
16
SUPPLY VOLTAGE (V)
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
VIN RISING
6
5
4
VIN FALLING
3
2
VIN RISING
2.0
1.5
1.0
VIN FALLING
MAX5078 toc09
MAX5078B (TTL INPUT)
VDD = 15V
400
SUPPLY CURRENT (µA)
7
MAX5078B
(TTL INPUT)
2.5
500
MAX5078 toc08
8
3.0
INPUT THRESHOLD VOLTAGE (V)
MAX5078A
(CMOS INPUT)
9
INPUT THRESHOLD VOLTAGE (V)
MAX5078 toc07
10
SUPPLY CURRENT vs. LOGIC-INPUT
VOLTAGE (INPUT LOW-TO-HIGH)
INPUT THRESHOLD VOLTAGE
vs. SUPPLY VOLTAGE
INPUT THRESHOLD VOLTAGE
vs. SUPPLY VOLTAGE
300
200
100
0.5
1
0
0
4
6
8
10
12
14
10
12
14
16
2
4
6
8
10
12
14
SUPPLY CURRENT vs. LOGIC-INPUT
VOLTAGE (INPUT HIGH-TO-LOW)
SUPPLY CURRENT vs. LOGIC-INPUT
VOLTAGE (INPUT LOW-TO-HIGH)
SUPPLY CURRENT vs. LOGIC-INPUT
VOLTAGE (INPUT HIGH-TO-LOW)
200
100
3
2
4
6
8
10
12
14
16
3
2
0
0
2
4
1
1
0
MAX5078A (CMOS INPUT)
VDD = 15V
SUPPLY CURRENT (mA)
SUPPLY CURRENT (mA)
4
MAX5078 toc12
MAX5078A (CMOS INPUT)
VDD = 15V
16
5
MAX5078 toc11
5
MAX5078 toc10
300
0
2
4
6
8
10
12
14
16
0
2
4
6
8
10
12
14
16
LOGIC-INPUT VOLTAGE (V)
LOGIC-INPUT VOLTAGE (V)
LOGIC-INPUT VOLTAGE (V)
DELAY MISMATCH BETWEEN IN+
AND IN- TO OUT vs. TEMPERATURE
DELAY MISMATCH BETWEEN IN+
AND IN- TO OUT vs. TEMPERATURE
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 4V, CL = 5000pF)
OUTPUT FALLING
2
OUTPUT RISING
0
4
DELAY MISMATCH (ns)
4
-2
MAX5078 toc15
6
MAX5078 toc13
6
OUTPUT RISING
IN2V/div
2
0
-2
OUT
2V/div
OUTPUT FALLING
-4
MAX5078A (CMOS INPUT)
VDD = 4.5V, CL = 10,000pF
MAX5078 toc14
0
0
LOGIC-INPUT VOLTAGE (V)
400
SUPPLY CURRENT (µA)
8
SUPPLY VOLTAGE (V)
MAX5078B (TTL INPUT)
VDD = 15V
DELAY MISMATCH (ns)
6
SUPPLY VOLTAGE (V)
500
-4
0
4
16
MAX5078A (CMOS INPUT)
VDD = 15V, CL = 10,000pF
IN+ = VDD
-6
-6
-50
-25
0
25
50
75
TEMPERATURE (°C)
Maxim Integrated
100
125
-50
-25
0
25
50
75
100
125
20ns/div
TEMPERATURE (°C)
5
MAX5078
4A, 20ns, MOSFET Driver
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 4V, CL = 10,000pF)
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 4V, CL = 5000pF)
MAX5078 toc16
MAX5078 toc17
MAX5078B (TTL INPUT)
MAX5078B (TTL INPUT)
IN2V/div
IN2V/div
OUT
2V/div
OUT
2V/div
IN+ = VDD
IN+ = VDD
40ns/div
20ns/div
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 4V, CL = 10,000pF)
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 15V, CL = 5000pF)
MAX5078 toc19
MAX5078 toc18
MAX5078B (TTL INPUT)
IN2V/div
IN2V/div
OUT
5V/div
OUT
2V/div
IN+ = VDD
MAX5078B (TTL INPUT)
IN+ = VDD
20ns/div
40ns/div
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 15V, CL = 10,000pF)
MAX5078 toc20
IN2V/div
OUT
5V/div
MAX5078B (TTL INPUT)
IN+ = VDD
40ns/div
6
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
Typical Operating Characteristics (continued)
(TA = +25°C, unless otherwise noted.)
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 15V, CL = 5000pF)
MAX5078 toc21
LOGIC-INPUT VOLTAGE vs. OUTPUT VOLTAGE
(VDD = 15V, CL = 10,000pF)
MAX5078 toc22
MAX5078B (TTL INPUT)
MAX5078B (TTL INPUT)
IN2V/div
IN2V/div
OUT
5V/div
OUT
5V/div
IN+ = VDD
IN+ = VDD
40ns/div
20ns/div
VDD vs. OUTPUT VOLTAGE
VDD vs. OUTPUT VOLTAGE
MAX5078 toc23
MAX5078B (TTL INPUT)
MAX5078 toc24
VDD
5V/div
MAX5078B (TTL INPUT)
VDD
5V/div
OUT
5V/div
IN+ = 15V
IN- = GND
CL = 10,000pF
2ms/div
Maxim Integrated
IN+ = 15V
IN- = GND
CL = 10,000pF
OUT
5V/div
2ms/div
7
MAX5078
4A, 20ns, MOSFET Driver
Pin Description
PIN
NAME
FUNCTION
1
IN-
2, 3
GND
Inverting Logic-Input Terminal. Connect to GND when not used.
Ground
4
VDD
Power Supply. Bypass to GND with one or more 0.1µF ceramic capacitors.
5
OUT
Driver Output. Sources or sinks current to turn the external MOSFET on or off.
6
IN+
Noninverting Logic-Input Terminal. Connect to VDD when not used.
—
EP
Exposed Pad. Internally connected to GND. Do not use the exposed pad as the only electrical
ground connection.
Detailed Description
VDD Undervoltage Lockout (UVLO)
The MAX5078A/MAX5078B have internal undervoltage
lockout (UVLO) for VDD. When VDD is below the UVLO
threshold, OUT is pulled low independent of the state of
the inputs. The undervoltage lockout is typically 3.5V with
200mV typical hysteresis to avoid chattering. When VDD
rises above the UVLO threshold, the output goes high or
low depending upon the logic-input levels. Bypass VDD
using a low-ESR ceramic capacitor for proper operation
(see the Applications Information section).
Logic Inputs
The MAX5078A has CMOS logic inputs while the
MAX5078B has TTL-compatible logic inputs. The logic
inputs are protected against the voltage spikes up to
18V, regardless of the VDD voltage. The TTL and CMOS
logic inputs have 300mV and 0.1 x V DD hysteresis,
respectively, to avoid double pulsing during transition.
The low 2.5pF input capacitance reduces loading and
increases switching speed.
The logic inputs are high impedance and must not be left
floating. If the inputs are left open, OUT can go to an
undefined state as soon as VDD rises above the UVLO
threshold. Therefore, the PWM output from the controller
must assume proper state when powering up the device.
The MAX5078A/MAX5078B have two logic inputs, providing greater flexibility in controlling the MOSFET. Use IN+
for noninverting logic and IN- for inverting logic operation.
Connect IN+ to V DD and IN- to GND, if not used.
Alternatively, the unused input can be used as an
ON/OFF function. Use IN+ for active-low shutdown logic
and IN- for active-high shutdown logic (see Figure 3). See
Table 1 for all possible input combinations.
8
Driver Output
The MAX5078A/MAX5078B have low RDS(ON) p-channel
and n-channel devices (totem pole) in the output stage
for the fast turn-on/turn-off, high-gate-charge switching
MOSFETs. The peak source or sink current is typically
4A. The output voltage (VOUT) is approximately equal to
VDD when in high state and is ground when in low state.
The driver RDS(ON) is lower at higher VDD resulting in
higher source-/sink-current capability and faster switching speeds. The propagation delays from the noninverting and inverting logic inputs to OUT are matched to 2ns
typically. The break-before-make logic avoids any crossconduction between the internal p- and n-channel
devices, and eliminates shoot-through, thus reducing the
quiescent supply current.
Applications Information
RLC Series Circuit
The driver’s RDS(ON) (RON), internal bond/lead inductance (LP), trace inductance (LS), gate inductance (LG),
and gate capacitance (C G ) form a series RLC
circuit with a second-order characteristic equation. The
series RLC circuit has an undamped natural frequency
(ϖ0) and a damping ratio (ζ) where:
ϖ0 =
1
(LP + LS + LG ) × CG
RON
ξ=
2 ×
(LP + LS + LG )
CG
The damping ratio needs to be greater than 0.5 (ideally
1) to avoid ringing. Add a small resistor (RGATE) in
series with the gate when driving a very low gatecharge MOSFET, or when the driver is placed away
from the MOSFET.
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
IN+
VIH
VIL
VDD
MAX5078A
MAX5078B
90%
IN-
OUT
10%
tD-OFF1
tD-ON1
tF
IN-
tR
P
BREAKBEFOREMAKE
CONTROL
IN+
OUT
N
VIH
VIL
tD-OFF2
tD-ON2
GND
RISING MISMATCH = tD-ON2 - tD-ON1
FALLING MISMATCH = tD-OFF2 - tD-OFF1
Figure 1. Timing Diagram
Figure 2. MAX5054 Simplified Diagram (1 Driver)
Use the following equation to calculate the series resistor:
The current required to charge and discharge the internal nodes is frequency dependent (see the I DD-SW
Supply Current vs. Supply Voltage graph in the Typical
Operating Characteristics). The power dissipation (PQ)
due to the quiescent switching supply current (IDD-SW)
can be calculated as:
PQ = VDD x IDD-SW
For capacitive loads, use the following equation to estimate the power dissipation:
PCLOAD = CLOAD x (VDD)2 x fSW
RGATE ≥
(LP + LS + LG )
− RON
CG
LP can be approximated as 2nH for the TDFN package.
LS is on the order of 20nH/in. Verify LG with the MOSFET vendor.
Supply Bypassing and Grounding
Pay extra attention to bypassing and grounding the
MAX5078A/MAX5078B. Peak supply and output currents
may exceed 4A when driving large external capacitive
loads. Supply voltage drops and ground shifts create
negative feedback for inverters and may degrade the
delay and transition times. Ground shifts due to poor
device grounding may also disturb other circuits sharing
the same AC ground return path. Any series inductance
in the VDD, OUT, and/or GND paths can cause oscillations due to the very high di/dt when switching the
MAX5078A/MAX5078B with any capacitive load. Place
one or more 0.1µF ceramic capacitors in parallel as close
to the device as possible to bypass VDD to GND. Use a
ground plane to minimize ground return resistance and
series inductance. Place the external MOSFET as close
as possible to the MAX5078A/MAX5078B to further minimize board inductance and AC path impedance.
where CLOAD is the capacitive load, VDD is the supply
voltage, and fSW is the switching frequency.
Calculate the total power dissipation (PT) as follows:
PT = PQ + PCLOAD
Power Dissipation
The MAX5078A/MAX5078B MOSFET drivers source and
sink large currents to create very fast rising and falling
edges at the gate of the switching MOSFET. The high
di/dt can cause unacceptable ringing if the trace
lengths and impedances are not well controlled.
Power dissipation of the MAX5078A/MAX5078B consists
of three components: caused by the quiescent current,
capacitive charge/discharge of internal nodes, and the
output current (either capacitive or resistive load).
Maintain the sum of these components below the maximum power dissipation limit.
Maxim Integrated
Use the following equations to estimate the MAX5078A/
MA5078B total power dissipation when driving a groundreferenced resistive load:
PT = PQ + PRLOAD
PRLOAD = D x RON(MAX) x ILOAD2
where D is the fraction of the period the MAX5078A/
MA5078B’s output pulls high, RON(MAX) is the maximum
on-resistance of the device with the output high, and
I LOAD is the output load current of the MAX5078A/
MAX5078B.
Layout Information
9
MAX5078
4A, 20ns, MOSFET Driver
Table 1. MAX5078 Truth Table
IN+
IN-
OUT
Low
Low
Low
Low
High
Low
High
Low
High
High
High
Low
VDD
MAX5078
PWM
INPUT
OFF
Use the following PC board layout guidelines when
designing with the MAX5078A/MAX5078B:
•
•
•
•
•
Place one or more 0.1µF decoupling ceramic
capacitors from VDD to GND as close to the device
as possible. Connect VDD and GND to large copper
areas. Place one bulk capacitor of 10µF (min) on
the PC board with a low resistance path to the VDD
input and GND of the MAX5078A/MAX5078B.
Two AC current loops form between the device and
the gate of the driven MOSFET. The MOSFET looks
like a large capacitance from gate to source when the
gate pulls low. The active current loop is from the
MOSFET gate to OUT of the MAX5078A/MAX5078B,
to GND of the MAX5078A/MAX5078B, and to the
source of the MOSFET. When the gate of the MOSFET
pulls high, the active current is from the VDD terminal
of the decoupling capacitor, to V DD of the
MAX5078A/MAX5078B, to OUT of the MAX5078A/
MAX5078B, to the MOSFET gate, to the MOSFET
source, and to the negative terminal of the decoupling
capacitor. Both charging current and discharging
current loops are important. Minimize the physical distance and the impedance in these AC current paths.
Keep the device as close to the MOSFET as possible.
In a multilayer PC board, the inner layers should
consist of a GND plane containing the discharging
and charging current loops.
Pay extra attention to the ground loop and use a
low-impedance source when using a TTL logicinput device. Fast fall time at OUT may corrupt the
input during transition.
IN+
ON
GND
Figure 3. Unused Input as an ON/OFF Function
Additional Application Circuits
VS
VDD
VDD
MAX5078A
MAX5078B
OUT
IN+
IN-
N
GND
Figure 4. Noninverting Application
VS
4V TO 15V
VDD
Exposed Pad
The TDFN-EP package has an exposed pad on the bottom of its package. This pad is internally connected to
GND. For the best thermal conductivity, solder the
exposed pad to the ground plane in order to dissipate
1.9W. Do not use the ground-connected pad as the
only electrical ground connection or ground return. Use
GND (pins 2 and 3) as the primary electrical ground
connection.
IN-
OUT
VOUT
MAX5078A
MAX5078B
OUT
IN+
N
FROM PWM
CONTROLLER
(BOOST)
IN-
GND
Figure 5. Boost Converter
10
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
4V TO 15V
VDD
IN+
MAX5078A
MAX5078B OUT
P
INFROM PWM
CONTROLLER
(BOOST)
GND
VDD
IN+
VOUT
MAX5078A
MAX5078B OUT
N
INGND
Figure 6. MAX5078A/MAX5078B In High-Power Synchronous Buck Converter
VIN
VOUT
4V TO 15V
VDD
4V TO 15V
VDD
MAX5078
PWM IN
VDD
OUT
IN+
MAX5078
MAX5078
OUT
IN-
GND
IN+
OUT
IN+
GND
IN-
IN-
GND
SIGNAL FROM PRIMARY
Figure 7. Forward Converter with Secondary-Side Synchronous Rectification
Maxim Integrated
11
MAX5078
4A, 20ns, MOSFET Driver
Package Information
Chip Information
PROCESS: CMOS
12
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE NO.
LAND
PATTERN NO.
6 TDFN-EP
T633+2
21-0137
90-0058
Maxim Integrated
MAX5078
4A, 20ns, MOSFET Driver
Revision History
REVISION
NUMBER
REVISION
DATE
2
9/12
DESCRIPTION
Added automotive qualified parts to Ordering Information
PAGES
CHANGED
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in
the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 ________________________________ 13
© 2012 Maxim Integrated Products, Inc.
The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.