Product Selection Guide Visible LEDs and Assemblies A Part Of Everyday Technology Category VLED Description Page # 3 Components Through-hole High Flux Surface Mount White 6 5-8 5, 6 & 8 RGB 7 Lednium 8 Assemblies 9 & 10 Lens 15° & 23° Package Drawings Page 2 4&6 7 13 - 19 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Leadership in Manufacturing As a global leader in compound semiconductor design and packaging, OPTEK begins with the most advanced HighBrightness Light Emitting Diode starting materials. The dice, or chips for OPTEK’s Phosphored White, Blue, Blue-Green and Green are InGaN on sapphire and SiC. The Red, Orange, Amber and Yellow LEDs are made from the most advanced AlInGaP on gallium arsenide in the most robust of structures for new challenging applications in Solid State Lighting and Illumination. Advanced chip technology is the heart of the device, whether it is an industry standard or application-specific surface mount power or leaded component. It is the advances in all of these materials that continues to expand the use of the LED beyond traditional status indicator applications. Discrete LED Capabilities OPTEK high-brightness LED applications range from outdoor LED Video Message signs to cell phone displays and camera flash. Design engineers in solid-state traffic and pedestrian signals find standard OPTEK product designed specifically for their use. The following is a sample of the package portfolio and typical uses of OPTEK product in the Visible Spectrum. High Brightness Through-hole LEDs OPTEK offers all colors with high light output in a variety of diameters, shapes and viewing angles, using AlInGaP and InGan material. Binning by wavelength, forward voltage, and luminous intensity is available. Applications include displays and signs, indoors and in full sunlight; automotive interior and exterior lighting; information signage; architectural and decorative lighting. Surface Mount Reflective PLCC and chip LED packages are available in single- and multi-color packages, including tunable full-color RGB for dynamic and static lighting effects. Surface mount LEDs provide bright light output with low VF to backlight LCDs in handheld appliances. Reds, greens, and blues form pixels for outdoor and indoor signs, displays, and channel letters. High Flux OPTEK’s 4-pin square-shaped LEDs are available in multiple viewing angles and 5 colors. This package provides lighting solutions for automotive applications and is used in the signage industry in arrays and housings to replace neon. High Power 1-watt and greater components complete with thermal management deliver bright solid-state lighting solutions. For general illumination, emergency lighting, and task lighting, OPTEK offers long-life energy efficient devices and reduced maintenance costs. LED Assembly and Special Product Capability Thermally managed LED components and arrays are the key to safely and reliably replacing older technologies. These solutions are found in the OPTEK toolbox. You’ll find a number of standard LED assemblies in this selection guide. You may consider this just a starting point in your search for the optimum solutions for your unique requirement. Automotive interior and exterior lighting designers turn to OPTEK’s optoelectronics engineering teams for applicationspecific lighting assemblies as well as discrete LEDs. When an application requires tight bin and rank segmentation or other special care, OPTEK LEDs are always the answer. The extensive engineering support for customer designs using LEDs for color on demand is ready, willing and able to meet the challenge. Page 3 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Visible LEDs OVAL THROUGH-HOLE LED – Multiple Viewing Angles Oval ThroughPart Number Hole OVLHBKD8 OVLHGKD8 OVLHQKD8 OVLHRKD8 OVLJBGD8 OVLJGGD8 OVLJRGD8 OVLKBGT6 OVLKGGT6 OVLKQGT6 Size 5 mm 4 mm 4 mm Chip Material Emitted Color λD (nm) InGaN InGaN AlInGaP AlInGaP InGaN InGaN AlInGaP InGaN InGaN AlInGaP Blue Green Red-Orange Red Blue Green Red Blue Green Red-Orange 470 525 618 624 470 525 624 470 525 616 Lens Color IV (mcd) Typ. Typ. VF 500 1100 800 900 300 1200 400 300 1100 430 3.4 3.6 2.3 2.1 3.6 3.6 2.2 3.4 3.3 2.1 IV (mcd) at IF=mA Typ. 3800 Typ. VF 3.4 9800 3.4 5000 3.4 at IF=mA 20 Color Diffused 20 20 Viewing Package Angle ° # 110° / 50° 200 100° / 50° 201 100° / 60° 202 5mm ROUND HIGH-INTENSITY THROUGH-HOLE LED Material InGaN Chip Emitted Color Blue OVLGC0C6B9 InGaN Blue-Green 505 OVLGG0C5B9 5 mm InGaN Green 525 OVLGY0C9B9 AlInGaP Yellow 589 10300 2.0 OVLGS0C8B9 AlInGaP Red 623 8550 2.0 5mm ThroughPart Number Hole OVLGB0C6B9 Size λD (nm) 470 Lens Color Water Clear 20 OVLFB3C7 InGaN Blue 470 1350 3.4 OVLFG3C7 InGaN Green 525 5200 3.4 AlInGaP Yellow Red 589 623 5700 5000 2.2 2.2 OVLFY3C7 5 mm OVLFR3C7 AlInGaP Water Clear 20 Viewing Package Angle # 6° 203 30° 204 5mm CYLINDER THROUGH-HOLE LED 5mm ThroughPart Number Hole Size Chip Material Emitted Color λD (nm) Lens Color IV (mcd) at IF=mA Typ. Typ. VF OVLLB8C7 InGaN Blue 470 300 3.4 OVLLG8C7 InGaN Green 525 670 3.4 AlInGaP Yellow 589 650 2.2 AlInGaP Red 623 570 2.2 OVLLY8C7 5 mm OVLLR8C7 Water Clear 20 Viewing Package Angle # 85° 207 3mm ROUND THROUGH-HOLE LED 3mm ThroughPart Number Hole Size OVLAB6CB8 OVLAG6CB8 3 mm OVLAS6CB8 Material Emitted Color λD (nm) InGaN Blue 470 InGaN Green 527 AlInGaP Red 628 Lens Color Water Clear IV (mcd) at IF=mA 20 Typ. Typ. VF 600 3.6 2000 3.6 1100 2.3 OVLBB4C7 InGaN Blue 470 900 3.4 OVLBG4C7 InGaN Green 525 2000 3.4 AlInGaP Yellow 589 2400 2.2 AlInGaP Red 623 1800 2.2 OVLBY4C7 OVLBR4C7 Page 4 Chip 3 mm Water Clear 20 Viewing Package Angle # 65° 205 45° 206 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com SURFACE MOUNT POWER LED – 6mm2 6mm2 SMD Part Number Package OVSPBBCR4 Material Chip Lens Emitted Color λD(nm, °K) Color InGaN Blue 470nm ΦV (lm) at IF=mA Typ. Typ. VF 350 9 3.6 InGaN Green 525nm 350 48 3.6 AlInGaP Red 625nm 400 26 2.5 OVSPWBCR4 InGaN White 7000°K 350 48 3.6 OVSPYBCR4 AlInGaP Yellow 587nm 400 35 2.5 OVSPRBCR44 AlInGaP Red 625nm 400 30 2.5 OVSPYBCR44 AlInGaP Yellow 589nm 400 35 2.5 InGaN White 7000°K 350 52 3.6 OVS5RCR44 AlInGaP Red 625nm 175 8 2.2 OVS5YCR44 AlInGaP Yellow 589nm 175 11 2.2 OVSPGBCR4 OVSPRBCR4 OVSPWBCR44 6 mm2 Flat 6 mm2 Dome Water Clear Viewing Package Angle # 120° 220 40° 60° 221 40° TOP-VIEW SURFACE MOUNT LED with FLAT LENS PLCC4 SMD Part Number OVSABBC2R8 OVSACBC2R8 OVSAGBC2R8 OVSAABC2R8 Package PLCC4 Chip Material Emitted Color λD (nm) InGaN InGaN InGaN Blue Blue-Green Green 470 505 527 AlInGaP Amber 591 OVSASBC2R8 AlInGaP Red 628 OVSAWBCR4 InGaN White —- Lens Color IV (mcd) at IF=mA Typ. Typ. VF 30 200 560 700 3.9 3.9 3.9 700 2.6 Water Clear 50 900 2.5 1050 3.4 Viewing Package Angle # 120° 210 TOP-VIEW SURFACE MOUNT LED with DOMED LENS PLCC4 SMD Part Number Package OVSAABLCR8 OVSAQBLCR8 PLCC4 OVSASBLCR8 Chip Material Emitted Color λD (nm) AlInGaP Amber 594 AlInGaP Red-Orange 618 AlInGaP Red 628 Lens Color Water Clear IV (mcd) at IF=mA 50 Typ. Typ. VF 1650 2.6 2800 2.5 900 2.5 Viewing Package Angle # 60° 211 SIDE EMITTING SURFACE MOUNT LED RA PLCC SMD Lens Color IV (mcd) Typ. VF 470 120 3.6 Blue-Green 505 400 3.6 InGaN Green 527 560 3.6 AlInGaP Amber 594 350 2.3 OVSR9RBCR8 AlInGaP Red 624 400 2.3 OVSR9WBCR8 InGaN White —- 600 3.4 Package Material Emitted Color λD (nm) OVSR9BBCR8 InGaN Blue OVSR9CBCR8 InGaN OVSR9GBCR8 OVSR9ABCR8 Page 5 Chip Typ. Part Number RA PLCC Water Clear at IF=mA 20 Viewing Package Angle # 120° 212 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Visible LEDs SUPER FLUX 4-PIN LED – 7.6mm2 2 7.6mm Through-hole *Dome Height = 1.9mm Material Chip Emitted Color λD (nm) OVFSB6C8 InGaN Blue 470 OVFSG6C8 InGaN Green 527 AlInGaP Amber 591 AlInGaP Red-Orange 618 AlInGaP InGaN Red White 624 —- Part Number OVFSAAC8 OVFSQ4C8 OVFSRAC8 OVFSW6C8 Package 7.6 mm2 Lens Color ΦV (mlm) at IF=mA Typ. Typ. VF 850 4.0 2500 4.0 5000 2.5 100° 70 4500 2.6 40° 30 4500 1200 2.5 4.0 100° 60° 30 Water Clear Viewing Package Angle # 60° 209 WHITE InGaN SURFACE MOUNT LED Package Part Number Lens Color Intensity/Flux at IF=mA Typ. Typ. VF Viewing Angle Package # PLCC2 OVS9WBCR4 20 750 mcd 3.2 120° 213 RA 2.8x1.2x.8 OVSRWACR6 20 1000 mcd 3.4 x120°, y110° 214 PLCC4 OVSAWBCR4 30 1050 mcd 3.4 120° 210 350 48 lm 120 7 lm 120° 220 OVS5WBCR4 150 21 lm OVSPWBCR44 350 52 lm OVS3WBCR44 120 7 lm 3.6 60° 221 OVSR9WBCR8 20 600 mcd 3.4 120° 212 OVSPWBCR4 6X6 Flat 6X6 Dome RA PLCC OVS3WBCR4 Water Clear 3.6 3.2 WHITE InGaN THROUGH-HOLE LED Package Part Number Lens Color Intensity/Flux at IF=mA Typ. Typ. VF Viewing Angle Package # Round 3 mm OVLAW4CB6 20 1000 mcd 3.4 45° 205 Round 5 mm OVLEW1CB9 20 18000 mcd 3.4 15° 203 2100 mcd 3.4 30° 216 1600 mcd 3.4 50° 208 1200 mlm 4.0 60° 209 OVLEW3CB6 Round 5 mm Water Clear 20 OVLEW5CB6 4-pin Flux Page 6 OVFSW6C8 30 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com FULL-COLOR (R/G/B) SURFACE MOUNT LED Package Part Number Lens Color at IF=mA IV (mcd) Typ. R G B Typ. VF Viewing Angle Package # Top-view Chip LED 2.4x2.4x.95 OVSTRGBAC6 20 100 333 88 R=2.8 G=3.9 B=3.9 110° 219 PLCC4 3.2x2.8x1.9 OVSARGB3R8 20 300 450 110 R=2.3 G=3.6 B=3.6 120° 222 PLCC6 6.0x5.0x2.5 OVSTRGBBCR8 3x50 1000 900 280 R=2.5 G=4.5 B=4.5 120° 223 6X6 Flat 1watt OVSPRGBCR4 3x250 21 lm 32 lm 7.51 lm R=2.3 G=3.5 B=3.5 130° 215 Water Clear SECONDARY OPTICS FOR OVSP SERIES Part Number Size (mm) Viewing Angle Shipping Container Package Quantity / Tray Lens with holder OVLENS154 20 diam 15 Tray 72 Lens with holder OVLENS234 20 diam 23 Tray 72 Package Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Page 7 Visible LEDs 1-WATT LEDNIUM SERIES, FLUSH MOUNT, LOW PROFILE 1.10mm Package Emitted Color λD (nm) Typ OVTL01LGAA Amber 595 350 38 2.3 OVTL01LGAB Blue 460 350 15 3.4 OVTL01LGAG Green 515 350 52 3.6 Red 625 350 53 2.3 OVTL01LGAW Cool White 7000 °K 350 50 3.4 OVTL01LGAWD Daylight White 5800 °K 350 45 3.4 OVTL01LGAWW Warm White 3500 °K 350 30 3.4 Optek Part No. OVTL01LGAR Size 5.2 x 5.9mm Forward Typical Iv/flux Typical VF Current (mA) (lm) Viewing Angle Package # 135° 224 Viewing Angle Package # 135° 225 Viewing Angle Package # 120° 226 1-WATT LEDNIUM SERIES, SURFACE MOUNT, LOW PROFILE 1.50mm Package Emitted Color λD (nm) Typ Forward Current (mA) Typical Iv/ flux (lm) Typical VF OVTL01LGAAS Amber 595 350 38 2.3 OVTL01LGABS Blue 460 350 15 3.4 OVTL01LGAGS Green 515 350 52 3.6 Red 625 350 53 2.3 OVTL01LGAWS Cool White 7000 °K 350 50 3.4 OVTL01LGAWDS Daylight White 5800 °K 350 45 3.4 OVTL01LGAWWS Warm White 3500 °K 350 30 3.4 Optek Part No. OVTL01LGARS Size 5.2 x 5.9mm 10– WATT LEDNIUM SERIES Die Package Part Number Lens Color Emitted Color λD (nm) OVTL09LG3B Blue 460 nm 9.5 OVTL09LG3G Green 515 nm OVTL09LG3A Amber Red OVTL09LG3R OVTL09LG3WD OVTL09LG3WW Page 8 Forward Voltage VF @ 600mA Flux @ 1.05A Water Clear Max. (V) Typ. (lm) 10.2 11.2 117 10.3 11.0 11.9 423 595 nm 6.3 7.0 7.9 297 625 nm 6.3 7.0 7.9 423 8.9 9.1 9.25 TBD 8.9 9.1 9.25 TBD Daylight 5800 (°K) White Warm 3500 (°K) White Min. (V) Typ. (V) OVTL09LG3W Cool White 7000 (°K) 9.5 10.2 11.2 387 OVTL09LG3M Red/ Green/ Blue 625 nm 515 nm 460 nm 8.4 8.6 8/8 266 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com LED Assemblies OPA729—10 Watt Light Bar on Anotherm® Heat Spreader Electrical / Optical Characteristics: TA=25°C, IF=700mA [ Green dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA729Y 12.5 OPA729B Beam Angle Color λD (nm) 350 Yellow 587 18.0 90 Blue 470 OPA729G 18.0 480 Green 530 OPA729R 12.5 260 Red 625 OPA729W 18.0 480 White 7000 °K OPA729YD 12.5 350 Yellow 587 OPA729BD 18.0 90 Blue 470 OPA729GD 18.0 480 Green 530 OPA729RD 12.5 260 Red 625 OPA729WD 18.0 480 White 7000 °K 120° 40° 60° Package # 232 233 OPA740—10 Watt Light Bar on Anotherm® Heat Spreader with Lens Electrical / Optical Characteristics: TA=25°C, IF=700mA [ Green dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA740Y23 12.5 OPA740B23 Beam Angle Color λD (nm) 297 Yellow 587 18.0 76 Blue 470 OPA740G23 18.0 408 Green 530 OPA740R23 12.5 221 Red 625 OPA740W23 18.0 408 White 7000 °K Color λD (nm) 23° Package # 228 OPA731—20 Watt Light Flood on Anotherm® Heat Spreader Electrical / Optical Characteristics: TA=25°C, IF=1.4A [ Red dot Power Supply ] Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle OPA731Y 12.5 700 Yellow 587 OPA731B 18.0 180 Blue 470 OPA731G 18.0 960 Green 530 OPA731R 12.5 520 Red 625 OPA731W 18.0 960 White 7000 °K OPA731YD 12.5 700 Yellow 587 OPA731BD 18.0 180 Blue 470 OPA731GD 18.0 960 Green 530 OPA731RD 12.5 520 Red 625 OPA731WD 18.0 960 White 7000 °K 120° 40° 60° Package # 234 235 Page 9 LED Assemblies OPA741—12 Watt Light Ring on Anotherm® Heat Spreader with Lens Electrical / Optical Characteristics: TA=25°C, IF=700mA [ Green dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA741Y23 15.0 OPA741B23 Beam Angle Color λD (nm) 357 Yellow 587 21.6 92 Blue 470 OPA741G23 21.6 490 Green 530 OPA741R23 15.0 265 Red 625 OPA741W23 21.6 490 White 7000 °K 23° Package # 229 OPA730—12 Watt Light Ring on Anotherm® Heat Spreader Electrical / Optical Characteristics: TA=25°C, IF=700mA [ Green dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA730Y 15.0 OPA730B Beam Angle Color λD (nm) 420 Yellow 587 21.6 108 Blue 470 OPA7309G 21.6 576 Green 530 OPA730R 15.0 312 Red 625 OPA730W 21.6 576 White 7000 °K OPA730YD 15.0 420 Yellow 587 OPA730BD 21.6 108 Blue 470 OPA730GD 21.6 576 Green 530 OPA730RD 15.0 312 Red 625 OPA730WD 21.6 576 White 7000 °K Color λD (nm) 120° 40° 60° Package # 236 237 OPA739—3 Watt Light Bar on Anotherm® Heat Spreader Electrical / Optical Characteristics: TA=25°C, IF=350mA [ Blue dot Power Supply ] Page 10 Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle OPA739Y 7.5 105 Yellow 587 OPA739B 10.8 27 Blue 470 OPA739G 10.8 144 Green 530 OPA739R 7.5 78 Red 625 OPA739W 10.8 144 White 7000 °K OPA739YD 7.5 105 Yellow 587 OPA739BD 10.8 27 Blue 470 OPA739GD 10.8 144 Green 530 OPA739RD 7.5 78 Red 625 OPA739WD 10.8 144 White 7000 °K 120° 40° 60° Package # 230 231 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com OPA742—1 Watt Light Spot on Anotherm® Heat Spreader with Lens Electrical / Optical Characteristics: TA=25°C, IF=350mA [ Blue dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA742Y23 2.5 OPA742B23 Beam Angle Color λD (nm) 22 Yellow 587 3.6 8 Blue 470 OPA742G23 3.6 41 Green 530 OPA742R23 2.5 30 Red 625 OPA742W23 3.6 41 White 7000 °K Color λD (nm) 23° Package # 227 OPA733—1 Watt Light Spot on Anotherm® Heat Spreader Electrical / Optical Characteristics: TA=25°C, IF=350mA [ Blue dot Power Supply ] Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle OPA733Y 2.5 26 Yellow 587 OPA733B 3.6 9 Blue 470 OPA733G 3.6 48 Green 530 OPA733R 2.5 35 Red 625 OPA733W 3.6 48 White 7000 °K OPA733YD 2.5 26 Yellow 587 OPA733BD 3.6 9 Blue 470 OPA733GD 3.6 48 Green 530 OPA733RD 2.5 35 Red 625 OPA733WD 3.6 48 White 7000 °K 120° 40° 60° Package # 238 239 Power Cubes* Advance Part Number Input Voltage Input Power Output Current Output Voltage Dot Color LED-120A-0350C-33F 120 VAC 60 Hz 15 Watts Max 350 mA 2.6 to 32.6 VDC Blue LED-120A-0700C-24F 120 VAC 60 Hz 17 Watts Max 700 mA 7.8 to 24.6 VDC Green LED-120A-1400C-24F 120 VAC 60 Hz 51 Watts Max 1400 mA 7.8 to 24.6 VDC Red * Power Cubes may be purchased from: Advance — 10275 Higgins Road — Rosemont, IL. 60018 — 800-322-2086 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Page 11 OPTEK’s In-House VLED Lab We have a state-of-the-art in-house visible LED lab to help our customers make the transition from traditional light sources to solid-state solutions. Our expertise with the equipment and years of optical experience gives you: • • • • Spectral analysis of LEDs in both ultraviolet and visible wavelength spectrums for analysis Detailed analysis on custom LED assemblies which validate the light output of the entire array as well as individual components Validation data for reliability testing as well as full-failure analysis Optimization of thermal management designs The OPTEK visible LED lab enables us to provide you the full spectrum of data required to ensure your lighting designs are efficient, long lasting and at optimum light output. Page 12 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Package Drawings Pin # Description Pin # 1 Anode 1 Anode 2 Cathode 2 Cathode Description Pin # Description 1 Anode 1 Anode 2 Cathode 2 Cathode Package # 200 Package # 201 Pin # Package # 202 Package # 204 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Description Package # 203 Pin # Description Pin # Description 1 Anode 1 Anode 2 Cathode 2 Cathode Package # 205 Page 13 Package Drawings Pin # Description Pin # 1 Anode 1 Anode 2 Cathode 2 Cathode Description Package # 206 Package # 207 Pin # Description Pin # 1 Anode 2, 3 Anode 2 Cathode 1, 4 Cathode Package # 208 Package # 210 Page 14 Description Package # 209 Pin # Description Pin # Description 4 Anode 1 Anode 1, 2, 3 Cathode 1, 2, 3 Cathode Package # 211 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Pin # Description Pin # 1 Cathode 1 Anode 2 Anode 2 Cathode Package # 212 Description Package # 213 Pin # Description 1 Cathode 2 Anode Anode Red Cathode Blue Package # 215 Package # 214 Package # 216 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Green Pin # Description Pin # 1 Anode 1 Red Cathode 2 Cathode 2 Green Cathode 3 Blue Cathode 4 Anode Description Package # 217 Page 15 Package Drawings Package # 218 Package # 219 Pin # Green Blue Red Yellow White Pin # Red Yellow White 1 Cathode Cathode Anode Anode Anode 1 Anode Anode Anode 2 Anode Anode Cathode Cathode Cathode 2 Cathode Cathode Cathode Pin # 2 Pin # 2 Pin # 1 Red Yellow Green Blue Pin # 1 White Red Yellow Package # 220 Package # 221 Pin # Description Pin # Description 1 Red Cathode 1 Green Anode 2 Common Anode 2 Red Anode 3 Blue Cathode 3 Blue Anode Green Cathode 4 Green Cathode 4 Package # 222 Page 16 White 5 Red Cathode 6 Blue Cathode Package # 223 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Cathode Cathode Anode Anode Package # 224 Package # 225 + Voltage Ground Common Cathode Anode 1 Cathode 2 Anode 1 Cathode 2 Anode 2 Cathode 3 Anode 2 Cathode 3 Anode 3 Package # 226 Anode 3 Package # 227 + Voltage + Voltage Ground Ground Package # 228 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Package # 229 Page 17 Package Drawings + Voltage + Voltage Ground Package # 230 + Voltage Package # 231 + Voltage Ground Package # 232 Page 18 Ground Package # 233 + Voltage Package # 234 Ground + Voltage Ground Ground Package # 235 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com + Voltage Ground + Voltage Package # 236 + Voltage Package # 238 Ground Package # 237 Ground + Voltage Ground Package # 239 Notes: Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Page 19 Notes: Page 20 Issue A.1 2007 OPTEK Technology Inc. www.optekinc.com Corporate Office: OPTEK Technology 1645 Wallace Drive Carrollton, Texas 75006 USA Telephone: 972-323-2200 Toll Free: 800-341-4747 Fax: 972-323-2396 E-mail: [email protected] [email protected] www.optekinc.com CC-0407-02