Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Features: • • • • • • • Molded Epoxy package Zero crossing circuit High Input/output Optical Isolation 4k Vrms Small size and light weight Can be installed directly on the P.C. board Fast switching time Non-contact switch Approval Agency: • UL Cert. No: E321810(1001A,1002A,1003A only) Description: The OSSR Solid State Relay series are electronic controlled switches, they contain no moving parts. When voltage is applied to the input, a Light Emitting Diode or LED illuminates a Photosensor which controls the internal output circuit. The output circuit is utilized to drive high current loads. The input and output are optically isolated. The OSSR series incorporates a zero crossing circuit which minimizes current and noise surges due to resistive and inductive loads. Optek provides three different electrical configurations of the OSSR series: DC input – AC output, AC input – AC output and DC input – DC output. These configurations meet most industry applications. The OSSRD100XA family comes in a standard 4-pin SIP, Single In-Line Package, for PCB mounting applications. The package offers a light weight, compact and robust molded epoxy body with extended operating temperature range of up to 100°C. The input circuit features a DC range from 5 to 12 VDC. The output consists of a Triac circuit featuring load current ratings from 3 to 40 Amps and a maximum load voltage of 250VAC with normally open output. Applications: • • • • • • • • • • Temperature controlled systems Office equipment Motor controls Industrial Equipment Light controls systems Heater control Appliances HVAC temperature control Plastic molding Packaging industry OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 1 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Package Outline: 4-Pin SIP Tolerance: 0.2mm [millimeters] All dimensions in Inches [millimeters] Schematic: Top View ZC + - + LOAD INPUT OSSRD1001A— OSSRD1006A Pin Configuration Pin # Part Number 1 2 3 4 OSSRD1001A A K A1 (+) A2 (-) OSSRD1002A A K A1 (+) A2 (-) OSSRD1003A A K A1 (+) A2 (-) OSSRD1004A A K A1 (+) A2 (-) OSSRD1005A A K A1 (+) A2 (-) OSSRD1006A A K A1 (+) A2 (-) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 2 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A VDC Input / VAC Output Devices Ordering Information Part Number Input Min. Tgr Max. Output Min. Ouput Output Max. Vout Min. Vout Current Ift Current Current Type Br. Vol. Input to Output Configuration OSSRD1001A 5-12VDC 50mA 3A 0.05A 250VAC 50VAC AC 4000VAC BR —A1(+) A2(-) OSSRD1002A 5-12VDC 50mA 5A 0.05A 250VAC 50VAC AC 4000VAC OSSRD1003A 5-12VDC 50mA 10A 0.05A 250VAC 50VAC AC 4000VAC BR —A1(+) A2(-) OSSRD1004A 5-12VDC 50mA 15A 0.05A 250VAC 50VAC AC 4000VAC BR —A1(+) A2(-) OSSRD1005A 5-12VDC 50mA 25A 0.05A 250VAC 50VAC AC 4000VAC BR —A1(+) A2(-) OSSRD1006A 5-12VDC 50mA 40A 0.05A 250VAC 50VAC AC 4000VAC BR —A1(+) A2(-) Configuration Information LED Sensor BR—A1(+) A2(-) Configuration: Definition of Terms LED Identification—Sensor Identification BR - Bridge Rectifier A1(+) and A2(-) = Main Terminals of Double Triac Part Number Symbolization OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 3 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature OSSRD1001A thru OSSRD1006A Operating Temperature OSSRD1001A thru OSSRD1006A Isolation Voltage (Input to Output) OSSRD1001A thru OSSRD1006A Soldering Temperature 10 sec. OSSRD1001A thru OSSRD1006A -30° C to +125° C -30° C to +100° C 4,000 Vrms 260° C Input Diode Input Signal Voltage—(VIN) OSSRD1001A thru OSSRD1006A 5– 12 VDC Drop-out Voltage—(Vdo) OSSRD1001A thru OSSRD1006A 1 VDC Output Triac RMS On-State Current - (IT) OSSRA1001A OSSRA1002A OSSRA1003A OSSRA1004A OSSRA1005A OSSRA1006A 3 Arms 5 Arms 10 Arms 15 Arms 25 Arms 40 Arms Peak One Cycle Surge Current - (I surge) OSSRA1001A OSSRA1002A OSSRA1003A OSSRA1004A OSSRA1005A OSSRA1006A 30 A 50 A 100 A 150 A 250 A 400 A Repetitive Peak-Off State Voltage—(VDRM) OSSRD1001A thru OSSRD1006A 600 V Operating Frequency—(f) OSSRD1001A thru OSSRD1006A 47—70 Hz Critical Rate of Rise of On-State Current—(di/dt) OSSRD1001A thru OSSRD1006A Load Supply Voltage—(VOUT) OSSRD1001A thru OSSRD1006A 50 A/µS 250 Vrms AC OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 4 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Electrical Characteristics SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode VPU Pick-up Voltage OSSRD1001A thru OSSRD1006A - - 4 VDC IIN Input Current OSSRD1001A thru OSSRD1006A 5 - 35 mA Vrms IT = 1Arms VIN= 5 - 12 V Output Triac VT On-State Voltage OSSRD1001A thru OSSRD1006A - - 1.5 IOP Operating Current OSSRD1001A thru OSSRD1006A 50 - - mArms Vout = 240Vrms ILEAK Leakage Current OSSRD1001A thru OSSRD1006A - - 7 mArms Vout = 240Vrms dv/dt Critical Rate of Rise of Off-State Voltage OSSRD1001A thru OSSRD1006A 50 200 - V/µs - Yes - - 50 - 280 VAC IT = 50mArms MIN - - 10 25 mA VDRM = 600 V VDRM = 600 V 10^1 0 - - Ω DC500 V - Zero-Cross Voltage OSSRD1001A thru OSSRD1006A VOUT Load Voltage Rating OSSRD1001A thru OSSRD1006A IFT Minimum Trigger Current OSSRD1001A, OSSRD1002A, OSSRD1003A OSSRD1004A, OSSRD1005A, OSSRD1006A IT = 1Arms See Note 1. - Riso Isolation resistance Input to Output OSSRD1001A thru OSSRD1006A TON Turn-on Time OSSRD1001A thru OSSRD1006A - - 8.3 mS 60Hz AC TOFF Turn-off Time OSSRD1001A thru OSSRD1006A - - 8.3 mS 60Hz AC - 1.3 - °C/W Rth (j-C) l Thermal Resistance (between junction and case) − Note1: Output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor. The dv/dt rating is based on source impedance of 50 ohms. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 5 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1001A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 6 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1002A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 7 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1003A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 8 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1004A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 9 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1005A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 10 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A OSSRD1006A Characteristic Data Curves OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 11 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Quality and Reliability Requirements: Parameter Failure Criteria Test Conditions Room Temperature Operating Life (for light emitting diodes only) ± 20% TA = 25°C, IF = 60mA or max. rated, Time = 1000 hours High Humidity, High Temperature Reverse Bias ± 20% JEDEC, Method A101-B TA = 85°C, Humidity = 85%RH, Time = 1000 hours High Temperature Forward Bias ± 20% JEDEC, Method A108-A TA = 70°C, IF = 20mA, Time = 1000 hours Autoclave 0 Fail TA = 121°C, Pressure = 15psi, Humidity = 100% IR Reflow / Solderability Test 0 Fail JEDEC (J-STD-020) / MIL-STD-883E, Method 2003.7 MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Glass Transition of body 125°C Min. DSC test method Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage ± 20% 85°C, 500Hrs Label Identification: Carrollton, TX, USA MADE IN TAIWAN DESCRIPTION: Size: 3” (7.4 cm) X 2.2” (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. OPTEK P/N __OSSRD1001A___ IIIIIIIIIIIIIIIIIIIII QTY. ________—_________ IIIIIIIIIIIIIIIIIIIII DATE CODE _____(YYWW)___ IIIIIIIIIIIIIIIIIIIII LOT I.D. ____(Y-NNNNDDD)__ IIIIIIIIIIIIIIIIIIIII OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 12 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Packaging Information: Tube and Carton Packaging Specifications: Tube Packaging Dimensions OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 13 of 15 Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Tray and Carton Packaging Specifications (Cont.): Carton Packaging Dimensions Inner Carton All dimensions in millimeters Medium Carton All dimensions in millimeters OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 11/09 Page 14 of 15 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Solid State Relays 4-Pin SIP Package—VDC Input / VAC Output OSSRD1001A thru OSSRD1006A Tray and Carton Packaging Specifications (Cont.): Carton Packaging Dimensions Large Carton All dimensions in millimeters OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.3 11/09 Page 15 of 15