Wide Gap Optical Sensor OPB856Z Features: x Designed for Industrial applications x Threaded housing (M12 X 1 TH), Nut included Product Photo Here x Molded connectors mates with Molex 03-06-2023 plug. x Emitter (White) and Senor (Black) housing color coded Description: The OPB856 emitter and sensor pair that consists of an LED (935 nm) and a Phototransistor designed to operate efficiently with each other. They are mounted in a threaded (M12x1TH) color-coded housing. The LED (white) and the Phototransistor (black) are designed to easily panel mount in through a 0.4724” (12.0 mm) hole. A 12 mm nut is included for each housing. Both components is designed to electrically mate with a Molex (03-06-2023) connector. The OPB856 pair are designed to operate with separation distances between the LED and Phototransistor up to 12” (30.48 cm). For Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: x Non-contact interruptive object sensing x Assembly line automation x Machine automation x Equipment security x Machine safety 1 LED Optical Pair Part Number LED Peak Wavelength Sensor Connector Type OPB856Z 935 nm Transistor Use Molex 03-06-2023 1 Phototransistor 2 RoHS Ordering Information 2 Housing LED - White Sensor - Black White Housing Black Housing Plug MOLEX 03-06-2023 MOLEX 03-06-2023 Pin # LED Pin # Phototransistor Pin for Plug Male MOLEX 02-06-6122 Female MOLEX 02-06-7104 1 Anode 1 Emitter 2 Cathode 2 Collector OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 01/06 Page 1 of 3 Wide Gap Optical Sensor OPB856Z Absolute Maximum Ratings (TA=25°C unless otherwise noted) Storage & Operating Temperature Range -40° C to +85° C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C Input Diode (See OP165 for additional information) Continuous Forward DC Current 40 mA Reverse Voltage 2V Power Dissipation(1) 100 mW Output Phototransistor (See OP505 for additional information) Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5V Power Dissipation (1) 100 mW Electrical Characteristics (TA = 25rC unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP9999 for additional information) VF Forward Voltage - - 1.7 V IF = 20 mA IR Reverse Current - - 100 µA VR = 2 V Output Phototransistor (See OP9999 for additional information) V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 100 µA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA Collector Dark Current - - 100 nA VCE = 10 V, IF = 0, EE = 0 1.8 - - mA VCE = 5 V, IF = 20 mA, d = 2”( (50.8 mm)(2) ICEO Combined IC(ON) On-State Collector Current(3) Notes: (1) Derate linearly 1.67 mW/°C above 25 ° C.. (2) Distance between lenses along the optical axis is “d”. (3) All parameters tested using pulse technique. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 01/06 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Wide Gap Optical Sensor OPB856Z Normalized Collector Current vs. Distance between Emitter and Sensor 2.0 1.6 Normalized Output Current 5 mA 10 mA 20 mA 30 mA 40 mA 50 mA Normalized at d = 2.0" IF = 20mA VCE = 5V 1.8 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 Distance to Reflective Surface (inches) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A .1 01/06 Page 3 of 3