Miniature Surface Mount LED—OPR5200 Phototransistor—OPR5500 Features: • • • • Stackable on 2 mm centers Vertical or horizontal mounting Automatic pick-and-place compatible Combine OPR5200 and OPR5500 to create miniature switch Description: The OPR5200 is a miniature high efficiency GaAIAs light emitting diode in a high temperature polyamide chip carrier that is well suited to space-limited applications which require close channel spacing. The OPR5500 is a miniature NPN silicon phototransistor housed in a high temperature polyamide chip carrier that is well suited to space-limited applications which require close channel spacing. When combing the OPR5200 and OPR5500 (miniature phototransistor), this lateral mounting option can be used to create a non-focused reflective or slotted switch configuration. These parts can be automatically placed with standard SMD equipment and can be reflow soldered by virtually any conventional means. Wraparound contacts allow it to be mounted face up or on edge for a beam direction parallel to the seating plane. See Application Bulletin 237 for handling instructions Ordering Information Applications: • • • Slotted switches Industrial environments Space-limited applications Part Number OPR5200 Part Number OPR5500 LED Peak Wavelength 890 nm Sensor Transistor Output Power (µW) Min 350 IF (mA) Typ / Max 20 / 50 Light Current IC(ON) (µA) Min VCE Max 36 30 Total Beam Angle (Degrees) 90 Rise / Fall Times (nS) Typ Packaging 500 / 250 Chip Tray Input Power EE Viewing Angle (Degrees) (µW/cm2) 150 Packaging 120 Chip Tray OPR5200 OPR5500 Pin # Transistor Pin # LED 1 2 3 Anode Cathode N.C. 1 2 3 Collector Emitter Base 1 1 TOLERANCE IS ± .005 [0.13] RoHS DIMENSIONS ARE IN: [MILLIMETERS] INCHES Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. Collector Base 3 3 NPN Trans. Emitter 2 2 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 03/2012 Page 1 of 3 Miniature Surface Mount LED—OPR5200 Phototransistor—OPR5500 OPR5200 Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature -55° C to +125° C Continuous Forward Current 50 mA Peak Forward Current (1 µs pulse width, 10% duty cycle) Power Dissipation 1.0 A (1) 100 mW (2) 250° C Solder reflow time within 5°C of peak temperature is 20 to 40 seconds OPR5200 Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS 350 - - µW IF = 20 mA PO Output Power VF Forward Voltage - - 1.8 V IF = 20 mA IR Reverse Current - - 100 µA VR = 2 V λP Peak Wavelength - 890 - nm IF = 20 mA λBW Spectral Bandwidth - 80 - nm IF = 20 mA θHP Emission Angle - ±45° - - tr Output Rise Time - 500 - ns tf Output Fall Time - 250 - ns at half power points IP = 100 mA, PW = 10.0 µs, D.C. = 10% Notes: (1) Derate at 1.00 mW/° C above 25° C. (2) Solder time less than 5 seconds at temperature extreme. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 03/2012 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Miniature Surface Mount LED—OPR5200 Phototransistor—OPR5500 OPR5500 Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature -55° C to +125° C Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5V Power Dissipation (1) 100 mW (2) 250° C Solder reflow time within 5°C of peak temperature is 20 to 40 seconds OPR5500 Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER IC(ON) On-State Collector Current ICEO Dark Current MIN TYP MAX UNITS TEST CONDITIONS 36 - - µA VCE = 5 V, Ee = 150 µW/cm2 (890 nm light source) - - 100 nA VCE = 5 V, Ee = 0 V(BR)CEO Collector-Emitter Breakdown Voltage 30 - - V IC = 100 µA V(BR)ECO Emitter-CollectorBreakdown Voltage 5 - - V IE = 100 µA Saturation Voltage - - 0.4 V IC = 100 µA, Ee = 5 mW/cm2 Output Rise and Fall Time - 2.5 - µs VCC = 5 V, IC = 800 µA, RL = 100 Ω V(SAT) tr, tf Notes: (1) Derate at 1.00 mW/° C above 25° C. (2) Solder time less than 5 seconds at temperature extreme. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 03/2012 Page 3 of 3