Optimal IV® Star Series Multi-LED Recessed Die Design (RDD) OV4ZRGBA • Designed for 4 1-watt chips in recessed cavity with an optical grade 5mm diameter lens Exceptional thermal resistance (< 2° C/W junction to • Product Photo Here heatsink) • • Soldering points or pins provided for electrical connections Locating slots for M3 screws Part Number OV4ZRGBA Color Material Red AllnGaP Green InGaN Blue Amber InGaN AllnGaP Beam Angle Typ. Dominant Wavelength (nm) 625 60° Typical Luminous Flux (lm) 350 mA 700mA 35 75 Typical Forward Voltage (VF) 350 mA 2.5 522 30 45 3.9 455 585 5 36 9 55 3.6 2.5 PIN # DESIGNATOR 1, 6 CATHODE 2, 5 ANODE 3, 4 CATHODE Notes: RoHS • • • Test conditions: IF=350mA/700mA; TJ<130°C All dimensions are in inches & [millimeters]. Additional heat sinking required. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 05/2011 Page 1 of 3 Optimal IV® COS Star Series OV4ZRGBA Absolute Maximum Ratings DC Forward Current /die 700 mA Peak Pulsed Forward Current 1 6.0 A Reverse Voltage 5V Maximum Allowable Junction Temperature2 130° C Storage and Operating Temperature -50° ~ +100 ° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Notes: 1. Pulse width 1 ms maximum. Duty cycle 1/16. 2. Thermal Resistance junction to Board (Tjhs) is <2° C/W Electrical Characteristics (IF = 350 mA , TJ = 25° C) PARAMETER TYP MAX UNITS Forward Voltage (Amber) 2.5 3.0 V Forward Voltage (Blue) 3.6 4.0 V Forward Voltage (Green) 3.9 4.4 V Forward Voltage (Red) 2.5 3.0 V VF—Temperature Co-efficient (Amber & Red) -6.42 ---- mV/°C VF—Temperature Co-efficient ( Blue) -4.81 ---- mV/°C VF—Temperature Co-efficient (Green) -4.95 ---- mV/°C SYMBOL VF Optical Characteristics (IF = 350 mA/die , TJ = 25° C) COLOR LUMINOUS FLUX (lm) @ IF = 350mA DOMINANT WAVELENGTH SPECTRAL HALF WIDTH DOMINANT WAVELENGTH TEMPERATURE CO-EFFICIENT MIN TYP MIN TYP MAX Amber 15 36 580 585 590 16 nm 0.07 nm/° C Blue 5 5 450 455 460 20 nm 0.04 nm/° C Green 30 30 520 522 525 40 nm 0.04 nm/° C Red 18 35 620 625 630 37 nm 0.05 nm/° C Packaging: 10 Optimal IV® stars per tube OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 05/2011 Page 2 of 3 Optimal IV® COS Star Series OV4ZRGBA Spectral Responses for CRI 90 ( varied RGBA IF Drives) 0.035 0.03 0.0016 0.025 red 0.02 green 0.015 amber blue 0.01 0.005 0.0014 Relative Radiant Response Relative Spectral Responses (W/sr*nm) Relative Spectral Responses@ 350m A / die 0.0012 0.001 0.0008 0.0006 0.0004 0.0002 0 0 400 500 600 700 -0.0002400 800 450 500 550 600 650 700 750 800 w avelength (nm ) Wavelengths (nm ) Dom inant Wavelength vs IF Total Lum inous Flux vs IF 650 400 350 610 300 590 blue 570 green 550 amber 530 red TLF (lms) Dominant Wavelength (nm) 630 510 470 50 200 400 600 amber 150 100 0 green 200 490 450 blue 250 red 0 800 0 IF (m A) IF vs VF Derating Curve/die 1600 800 1200 700 blue green 800 amber 600 red 400 200 Allowable IF Drive (mA) 1400 1000 IF (mA) 200 400 600 800 1000 1200 1400 IF (m A) 600 Ta = 25oC 500 400 300 200 100 0 0 0 0 3 5 8 10 13 15 18 20 10 20 30 40 50 60 70 80 90 100 110 120 130 Junction Temperature(oC) VF (V) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue B 05/2011 Page 3 of 3