Amber PLCC4 Surface Mount LED

Amber PLCC4 Surface Mount LED
OVSAABC2R8
x
x
x
x
x
High intensity with low power consumption
White PLCC4 packaged in 8 mm tape on 7” diameter reel
Compatible with automatic placement equipment
Dimensions: 3.5 x 2.8 x 1.95 mm
120° viewing angle
Product Photo Here
The OVSAABC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens
optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides.
Applications
x Traffic lights
x Signal and symbol luminaire
x Mono-color indicators
x Backlighting (LCD, switches, displays, illuminated advertising)
x Interior automotive lighting (instrumentation clusters)
x Safety marker lights (steps, exit ways)
RoHS
Part Number
Material
Emitted Color
Intensity Typ. mcd
Lens Color
OVSAABC2R8
AlInGaP
Amber
700
Water Clear
Moisture
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 04/06
Page 1 of 4
Amber PLCC4 Surface Mount LED
OVSAABC2R8
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range
-40 ~ +100° C
Operating Temperature Range
-40 ~ +100° C
Junction Temperature
Junction/Ambient
110° C
1
300° C/W
Junction/Solder Point
150° C/W
Reverse Voltage
5V
Continuous Forward Current
70 mA
Peak Forward Current (10% Duty Cycle, PW ”—VHF
200 mA
Power Dissipation
225 mW
Note:
1. Rth test condition: Mounted on PC board FR 4 (pad size
2
)
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
MIN
TYP
MAX
UNITS
CONDITIONS
IV
Luminous Intensity
450
700
----
mcd
IF = 50 mA
VF
Forward Voltage
----
2.6
3.2
V
IF = 50 mA
IR
Reverse Current
----
----
10
µA
VR = 5 V
Dominant Wavelength
584
591
596
nm
IF = 50 mA
50% Power Angle
----
120
----
deg
IF = 50 mA
D
2
PARAMETER
½
Standard Bins (IF = 50 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown.
Orders for OVSAABC2R8 may be filled with any or all bins contained as below.
X2
X3
X4
X5
Luminous Intensity
(mcd)
1120
900
V2
710
V1
560
U2
450
U1
584
587
590
593
596
Luminous intensity is at
U1 bin or above.
Dominant Wavelength (nm)
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 04/06
Page 2 of 4
Phone: (972) 323-2200 or (800) 341-4747
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
FAX: (972) 323-2396 [email protected] www.optekinc.com
Amber PLCC4 Surface Mount LED
OVSAABC2R8
Typical Electro-Optical Characteristics Curves
mA
%
V
Forward Current vs. Forward Voltage
Half Power
mA
Relative Luminous Intensity vs. Forward Current
WL = 20nm
mA
°C
nm
Relative Luminous Intensity vs. Wavelength
Maximum Forward DC Current vs. Ambient
Temperature
v
50% Power Angle: 120°
A
Spatial Distribution
Reverse Current vs. Reverse Voltage
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A 04/06
Page 3 of 4
Amber PLCC4 Surface Mount LED
OVSAABC2R8
Reel Dimensions: 7-inch reel
Carrier Tape Dimensions: Loaded Quantity 2000 pieces per reel
Moisture Resistant Packaging
Label
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 04/06
Page 4 of 4
Phone: (972) 323-2200 or (800) 341-4747
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
FAX: (972) 323-2396 [email protected] www.optekinc.com