PLCC4 Red SMD Multi-Chip LED Lamp OVSTSBCR8 x x x x Light output optimized by interior reflector Wide viewing angle White package with clear window Tape and reel compatible with automatic placement equipment Product Photo Here The OVSTSBCR8 provides high mono-color output from a single package, 3-die design. This surface mount package is an efficient solution in modular applications where uniform brightness and color is required. The wide viewing angle adds flexibility for applications ranging from hand-held appliances to automotive interiors. Applications x Indication x Illumination x LCD back lighting x Automotive applications x Indoor signage Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSTSBCR8 AlInGaP Red 1100 Water Clear SOLDERING PATTERN RoHS Moisture DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. 1 CATHODE 2 COMMON ANODE 3 CATHODE 4 CATHODE DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 1 of 4 PLCC4 Red SMD Multi-Chip LED Lamp OVSTSBCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5V Continuous Forward Current 3 x 50 mA Peak Forward Current (10% Duty Cycle, 1 KHz) 3 x 200 mA Power Dissipation 3 x 130 mW Junction Temperature +110°C Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 710 1100 ---- mcd IF = 3 x 20 mA VF Forward Voltage ---- 2.3 2.6 V IF = 3 x 20 mA IR Reverse Current ---- ---- 10 µA VR = 5V Dominant Wavelength 620 628 635 nm IF = 3 x 20 mA 50% Power Angle ---- 120 ---- deg IF = 3 x 20 mA D 2 PARAMETER ½ Standard Bins (IF = 3x20 mA) Luminous Intensity (mcd) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSTSBCR8 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength ( D) values shown and specified are at IF = 3x20 mA. 1800 1400 W 2 1120 W 1 900 V2 710 V1 Luminous intensity is at V1 bin or above. 620 628 635 Dominant Wavelength (nm) Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com PLCC4 Red SMD Multi-Chip LED Lamp OVSTSBCR8 Typical Electro-Optical Characteristics Curves V mA A V Reverse Current vs Reverse Voltage Forward Current vs Forward Voltage Half Power 100 WL = 23 nm 75 % % 50 25 0 mA Relative Luminous Intensity vs Forward Current 40 500 60 nm 700 800 900 Relative Luminous Intensity vs Wavelength 50% Power Angle: 120° mA °C Maximum Forward DC Current vs Ambient Temperature Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 04/06 Page 3 of 4 PLCC4 Red SMD Multi-Chip LED Lamp OVSTSBCR8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 04/06 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com