Sensing and Control FIBER OPTIC DETECTOR OPF480 Features: • • • • • Electrically isolated plastic cap package High speed, low capacitance Designed to self align in the 0.228 diameter bore of standard fiber optic receptacles. Press fit simplified component installation 100MHz opera on minimum DescripƟon: The OPF480 is a low noise silicon PIN photodiode mounted in a low cost package for fiber op c applica ons. It offers fast response at moderate bias and is compa ble with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applica ons. The OPF480 is designed to be compa ble with mul mode op cal fibers from 50/125 to 200/300 microns. ApplicaƟons: • Industrial Ethernet equipment • Copper-to-fiber media conversion • Intra-system fiber op c links • Video surveillance systems RoHS General Note TT Electronics reserves the right to make changes in product specificaƟon without noƟce or liability. All informaƟon is subject to TT Electronics’ own data and is considered accurate at Ɵme of going to print. © TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B 08/2015 Page 1 Sensing and Control FIBER OPTIC DETECTOR OPF480 Electrical SpecificaƟons Absolute Maximum RaƟngs (TA = 25° C unless otherwise noted) Storage Temperature Range -55° C to +115° C Opera ng Temperature Range -40° C to +100° C Lead Soldering Temperature(1) 260° C Con nuous Power Dissipa on (2) 200 mW Maximum Reverse Voltage 100 VDC Electrical CharacterisƟcs (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP 0.45 0.55 MAX UNITS VR = 5.0V; 50/125µm fiber; l = 850nm R Responsivity ID Dark Current 0.1 lp Peak Response Wavelength 905 nm tr Output Rise Time 2.0 ns VR = 5V; RL = 50W, 10%-90% CT Total Capacitance 1.5 pF VR = 5V Field of View 80 FoV A/W TEST CONDITIONS 5.0 2.0 nA VR = 5.0V deg Notes: 1. Maximum of 5 seconds with soldering iron. Dura on can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. De-rate linearly at 2.13mW/°C above 25°C . General Note TT Electronics reserves the right to make changes in product specificaƟon without noƟce or liability. All informaƟon is subject to TT Electronics’ own data and is considered accurate at Ɵme of going to print. © TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B 08/2015 Page 2 Sensing and Control FIBER OPTIC DETECTOR OPF480 Mechanical Data General Note TT Electronics reserves the right to make changes in product specificaƟon without noƟce or liability. All informaƟon is subject to TT Electronics’ own data and is considered accurate at Ɵme of going to print. © TT electronics plc 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 www.optekinc.com | www. electronics.com Issue B 08/2015 Page 3