Data Sheet - OPTEK Technology

OPA741 Series
12 Watt Light Ring on
OptoTherm Linear Heat Spreader with Lens
OPA741 Series
•
•
•
•
•
12, 1 watt LEDs per cylindrical substrate
Mono-color per strip (Blue, Green, Red, Yellow, White)
Component beam angle 23°
Universal connector (Tyco 2-292173-2 mates with 173977-2)
RoHS Compliant
Product Photo Here
OPA741_ (23° Beam Angle)
The OPA741 Series are designed for areas where lighting intensity and reliability
are essential. The light beam angle of 23° is ideal for illuminating areas close or a long distances from the device
while requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat
dissipation of any light assembly in the industry.
For custom colors and design contact your OPTEK representative.
Electrical / Optical Characteristics: TA=25°C, IF=700mA
Part Number
Typical Forward Voltage (V)
Luminous Flux (lm)
OPA741Y23
15.0
OPA741B23
Beam Angle
Color
Dominant Wavelength
357
Yellow
587 nm
21.6
92
Blue
470 nm
OPA741G23
21.6
490
Green
530 nm
OPA741R23
15.0
265
Red
625 nm
OPA741W23
21.6
490
White
6,500°K
23°
OPA741_
See OVSP_BCR4 for
component specifications
+ Voltage
Ground
RoHS
DO NOT LOOK DIRECTLY AT LED
WITH UNSHIELDED EYES OR
DAMAGE TO RETINA MAY
OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A.2
09/08
Page 1 of 1