OPA740 Series 10 Watt Light Bar on OptoTherm Linear Heat Spreader OPA740 Series • • • • • • 10-1 watt LED on Linear substrate with 23° Lens Mono-color per strip (Blue, Green, Red, Yellow, White) Component beam angle 120° Universal connector (Tyco 2-292173-2 mates with 173977-2) Power connected to either end RoHS Compliant Product Photo Here OPA740_ (23° Lens) The OPA740 Series are designed for areas where lighting intensity and reliability are essential. The light beam angle of 23° is ideal for illuminating areas close or a long distances from the device while requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipation of any light assembly in the industry. OptoTherm is designed to be the optimum material for distribution of heat for high power devices. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=700mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA740Y23 12.5 OPA740B23 Color Dominant Wavelength 297 Yellow 587 nm 18.0 76 Blue 470 nm OPA740G23 18.0 408 Green 530 nm OPA740R23 12.5 221 Red 625 nm OPA740W23 18.0 408 White 6,500°K + Voltage Ground Beam Angle 23° OPA740_ See OVSP_BCR4 for component specifications DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 09/08 Page 1 of 1