OPA742 Series 1 Watt Light Spot on OptoTherm Linear Heat Spreader with Lens OPA742 Series • • • • • 1 watt LED on round substrate Mono-color per strip (Blue, Green, Red, Yellow, White) Component beam angle option 23° Universal connector (Tyco 2-292173-2 mates with 173977-2) RoHS Compliant Product Photo Here OPA742_ (23° Beam Angle) The OPA742 Series are designed for areas where lighting intensity and reliability are essential. The light beam angle of 23° is ideal for illuminating areas close or a long distances from the device while requiring minimal space. A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipation of any light assembly in the industry. For custom colors and design contact your OPTEK representative. Electrical / Optical Characteristics: TA=25°C, IF=350mA Part Number Typical Forward Voltage (V) Luminous Flux (lm) OPA742Y23 2.5 OPA742B23 Beam Angle Color Dominant Wavelength 22 Yellow 587 nm 3.6 8 Blue 470 nm OPA742G23 3.6 41 Green 530 nm OPA742R23 2.5 30 Red 625 nm OPA742W23 3.6 41 White 6,500°K 23° + Volt- Ground OPA742_ See OVSP_BCR4 for component specifications RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.2 09/08 Page 1 of 1