Fiber Optic Transmitter OPF670 Series Features: • • • • • Low cost 850 nm LED technology Low cost TO package with electrically isolated plastic cap High thermal stability High optical coupling efficiency to multimode fiber Industrial temperature range Description: The OPF670 series fiber optic transmitters are high performance devices packaged for data communication links. These transmitters are an 850 nm GaAlAs LED and are specifically designed to efficiently launch optical power into either 50/125µm or 62.5/125µm diameter multimode fiber. Three power ranges are offered, which allows the designer to select a device best suited for the application. The OPF670 is offered a low cost TO package with a plastic lens cap. The device is designed to be active aligned into a connector receptacle. Ordering Information Applications: • • • • Industrial Ethernet equipment Part Number Intra-system fiber optic links OPF670-1 LED Peak Wavelength 850nm Video surveillance systems OPF670-2 OPF670-3 850nm 850nm Copper-to-fiber media conversion PT50 (dBm) Min -17.5 Tr, Tf (ns) Typ / Max 8.0/10.0 -16.0 -14.5 8.0/10.0 8.0/10.0 Pin Function RoHS 1 Anode 2 Cathode 3 Not Connected OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A.1 01/07 Page 1 of 2 Fiber Optic Transmitter OPF670 Series Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -55° C to +100° C Operating Temperature Range -40° C to +85° C (1) 260° C (2) 100 mA Lead Soldering Temperature Continuous Forward Current Maximum Reverse Voltage 1.0 V Electrical/Optical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER MIN Total Coupled Power, 50/125 µm Fiber, NA = 0.20 PT50 MAX UNITS OPF670-1 -17.5 dBm OPF670-2 -16.0 dBm OPF670-3 -14.5 dBm VF Forward Voltage 1.5 VR Reverse Voltage 1.8 Wavelength 830 λ TYP 2.1 850 Δλ Optical Bandwidth 35 tr,tf Rise and Fall Time 8.0 870 10.0 CONDITIONS IF = 100 mA V IF = 100 mA V IR = 100 µA nm IF = 50 mA nm IF = 50 mA ns IF = 100 mA; 10% to 90%(3) Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. 3. 4. De-rate linearly at 1.0mA /°C above 25°C . No Pre-bias. All Optek fiber optic LED products are subjected to 100% burn-in as part of its quality control process. The burn-in conditions are 96 hours at 100mA drive current and 25°C ambient temperature. Relative Coupled Power vs Forward Current 1.2 2.0 Temperatures are Stepped in -40°C 20°C increments. 1.0 0.8 80°C 0.6 Temperatures are Stepped in 1.9 20°C increments. Forward Voltage Relative Coupled Power 1.4 Typical Forward Voltage vs Forward Current 1.8 1.7 1.6 -40°C 1.5 0.4 1.4 0.2 1.3 80°C 0 1.2 0 20 40 60 80 Forward Current (mA) 100 0 20 40 60 80 100 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 01/07 Page 2 of 2 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com