Surface Mount HELA-10+ HELA-10 High IP3 Monolithic Amplifier Broadband, 50 or 75 ohms, 5 to 1000 MHz Features • excellent flatness, ±0.4 dB typ. • very high IP3, 49 dBm typ. at 150 MHz & 45 dBm typ. at 800 MHz • very high IP2, 88 dBm typ. • low noise figure, 3.5 dB typ. CASE STYLE: CM624 PRICE: $19.95 ea. Qty. (1-9) + RoHS compliant in accordance with EU Directive (2002/95/EC) Applications • cellular • catv • instrumentation See our web site for RoHS Compliance methodologies and qualifications. Electrical Specifications at 25°C KIT1 NO. FREQ. (MHz) fL fU OHMS GAIN* (dB) Min. Typ. Max. DYNAMIC RANGE MAXIMUM POWER (dBm) Output (1 dB Compr.) Typ. Min. Typ. Flatness Input† (no damage) NF dB Typ. DC POWER VSWR ** Typ. (:1) IP3 dBm Typ. In Out Volt (V) THERMAL RESISTANCE*** Current (mA) θjc °C/W HELA-10A(+) 50 1000 75 10 12 13 ±0.4 30 26 20 3.5 47 1.22 1.22 12 525 6 HELA-10B(+) 50 1000 50 10‡ 12 13 ±0.4 30 26 20 3.5 47 1.22 1.22 12 525 6 HELA-10C(+) 5 450 75 9.3 11.4 12.5 ±0.4 30 26 20 3.5 48 1.3 1.22 12 525 6 HELA-10D(+) 8 300 50 9.3 11.0 12.5 ±0.4 30 26 20 3.5 48 1.2 1.2 12 525 6 1 Kit consists of HELA-10 plus transformers, see table below. 9.5 dB min., 800-1000 MHz. Open load is not recommended, potentially can cause damage. With no load, derate max. input power by 20 dB * Includes transformer losses at input & output. ** For 75 ohm. For 50 ohm, VSWR increases from 1.2:1 at 1 GHz to 2.0:1 at 50MHz. *** Thermal resistance is from junction to heat slug. ‡ † Applicaton Schematic Diagram Pin Connections PORT kl RF IN 3,6 (see table below for values C1 to C6. L1&L2) Maximum Ratings Heat SlugTemperature Storage Temperature 110°C max. -40°C to 150°C RF OUT 11,14 DC Voltage +13V DC 10,15 DC Power 7.15W CASE GND 1,4,5,8,9,12,13,16 NO CONNECTION 2,7 APPLICATION CIRCUIT A B C D T1 ADTL1-18-75 ADTL1-12 ADT1-1WT ADT1.5-1 T2 ADTL1-18-75 ADTL1-12 ADT1-4-75 ADT1.5-1 C1 TO C6 0.01µF 0.01µF 0.039µF 0.039µF L1, L2 0.75µH 0.75µH 3.3µH 3.3µH PCB EVALUATION LAYOUT BOARD TB-16 B14-TB-30 TB-17 B14-TB-17 TB-30 B14-TB-16 TB-45 B14-TB-17 Demo Board MCL P/N: TB-16,-17,-30,-45 Suggested PCB Layout (PL-076) Outline Drawing Outline Dimensions ( inch mm ) A B C D E F G H J K .295 .405 .098 .406 .36 .05 .016 .008 .004 .032 7.4910.29 2.4910.31 9.14 1.27 0.41 0.20 0.10 0.81 Assembly Guideline L M N P Q R S T wt -- .102 .028 .46 .13 .13 .34 .17 -- 2.59 0.7111.68 3.30 3.30 8.64 4.32 grams 0.67 ® Mini-Circuits Reflow solder the slug to the ground plane; PC board layouts for 75 ohm (B14-TB-16), (B14-TB-30), and for 50 ohm (B14-TB-17) are available upon request. Please contact Applications Department or consult our web site. INTERNET http://www.minicircuits.com P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 Distribution Centers NORTH AMERICA 800-654-7949 • 417-335-5935 • Fax 417-335-5945 • EUROPE 44-1252-832600 • Fax 44-1252-837010 Mini-Circuits ISO 9001 & ISO 14001 Certified REV. J M98898 HELA-10 A ED-6636T B ED-6636T C ED-7157/1 D ED-7491/2 050709