APPLICATION NOTE REPLACEMENT PART REFERENCE GUIDE: AN‐60‐059 ORIGINAL PART: REPLACEMENT PART: MAV‐11SM+ & MSA‐1105 (Avagotech) MAV‐11BSM+ This replacement part has been judged by Mini‐Circuits Engineering as a suitable replacement parta,b APPLICATION CIRCUITS ORIGINAL PART: MAV‐11SM+ & MSA‐1105 (Avagotech) REPLACEMENT PART: MAV‐11BSM+ CONCLUSION: 1) FORM‐FIT‐FUNCTIONAL COMPATIBLE: Same Circuit and PCB Layout and external components 2) Typical Performance Comparison a,b: Performance Gain (dB) Noise Figure (dB) Pout 1dB (dBm) Output IP3 (dBm Input Return Loss (db) Output Return Loss (dB) Operating Voltage (V) Operating Current (mA) Status Condition(GHz) 1.0 0.5 0.5 0.5 0.05‐1 0.05‐1 ‐‐‐ ‐‐‐ ‐‐‐ MAV‐11SM+/MSA‐1105 10.5 3.6 17.5 +30 14 11.5 See table above 60 Qualified, last time buy MAV‐11BSM+ 11.3 4.4 18.2 +36.5 14‐24 22 See table above 60 Qualified, in production Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The MSA-1105 part number is used for identification and comparison purposes only. AN-60-059 Rev.: A M150261 (04/14/15) File: AN60059.doc This document and its contents are the property of Mini-Circuits. Page 1 of 3 APPLICATION NOTE COMPARISON PERFORMANCE CURVES: Pout 1dB vs. FREQUENCY GAIN vs. FREQUENCY 20 14 18 10 Pout(dBm) GAIN (dB) 12 8 6 16 14 4 MAV-11BSM+ 2 12 MAV-11BSM+ MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 10 0 200 400 600 800 1000 MHz 0 35 35 RETURN LOSS (dB) 40 30 25 20 15 10 600 800 1000 OUTPUT RETURN LOSS vs. FREQUENCY 40 MAV-11BSM+ 5 30 25 20 15 10 MAV-11BSM+ 5 MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 0 0 200 400 600 800 0 1000 MHz 200 400 800 1000 OIP3 vs. FREQUENCY 6 45 5 40 OIP3 (dBm) 4 3 2 35 30 25 MAV-11BSM+ 1 600 MHz NOISE FIGURE vs. FREQUENCY NOISE FIGURE(dB) 400 MHz INPUT RETURN LOSS vs. FREQUENCY RETURN LOSS (dB) 200 MAV-11BSM+ MAV-11SM+/MSA-1105 MAV-11SM+/MSA-1105 0 20 0 200 400 600 800 1000 MHz 0 200 400 600 800 1000 MHz Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. b. The MSA-1105 part number is used for identification and comparison purposes only. AN-60-059 Rev.: A M150261 (04/14/15) File: AN60059.doc This document and its contents are the property of Mini-Circuits. Page 2 of 3 APPLICATION NOTE IMPORTANT NOTICE © 2015 Mini-Circuits This document is provided as an accommodation to Mini-Circuits customers in connection with Mini-Circuits parts only. In that regard, this document is for informational and guideline purposes only. Mini-Circuits assumes no responsibility for errors or omissions in this document or for any information contained herein. Mini-Circuits may change this document or the Mini-Circuits parts referenced herein (collectively, the “Materials”) from time to time, without notice. Mini-Circuits makes no commitment to update or correct any of the Materials, and Mini-Circuits shall have no responsibility whatsoever on account of any updates or corrections to the Materials or Mini-Circuits’ failure to do so. Mini-Circuits customers are solely responsible for the products, systems, and applications in which Mini-Circuits parts are incorporated or used. In that regard, customers are responsible for consulting with their own engineers and other appropriate professionals who are familiar with the specific products and systems into which Mini-Circuits’ parts are to be incorporated or used so that the proper selection, installation/integration, use and safeguards are made. Accordingly, Mini-Circuits assumes no liability therefor. In addition, your use of this document and the information contained herein is subject to Mini-Circuits’ standard terms of use, which are available at Mini-Circuits’ website at www.minicircuits.com/homepage/terms_of_use.html. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation: (i) by Mini-Circuits of such thirdparty’s products, services, processes, or other information; or (ii) by any such third-party of Mini-Circuits or its products, services, processes, or other information. AN-60-059 Rev.: A M150261 (04/14/15) File: AN60059.doc This document and its contents are the property of Mini-Circuits. Page 3 of 3