APPLICATION NOTE REPLACEMENT PART REFERENCE GUIDE, MNA-4+ ORIGINAL PART: REPLACEMENT PART: AN-60-082 MNA-4+ MNA-4A+ Replacement Part has been judged by Mini-Circuits Engineering as a suitable replacement to Original Parta MECHANICAL DIMENSIONS & PCB LAND PATTERN ORIGINAL PART: MNA-4+ REPLACEMENT PART: MNA-4A+ Case Style DQ849 (No Change) Marking Marking MNA4 MN4A Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 1 of 7 APPLICATION NOTE CONCLUSION: 1) FORM-FIT-FUNCTIONAL COMPATIBLEa: Replacement part is Form, Fit compatible. Following is a summary of changes/improvements: Typical performance comparison: See paragraphs 2 to 5 Min/Max Specifications, Thermal Resistance and Max Tj- see below: Parameter Original Part (MNA-4+) Gain-Min at 2 GHz (dB) & Vs=5V 14 Thermal resistance (°C/W) 78 Input Power (5 minutes max) 23 Maximum DC Voltage on pins 2 & 5 (V) 10 Replacement Part (MNA-4A+) 16 50 24 1 Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 2 of 7 APPLICATION NOTE 2) PERFORMANCE COMPARISONa (TYPICAL), DC Voltage=5V: MNA-4+ MNA-4A+ (Original (Replacement Part) Part) 5 units on TB Qty-1 Qty-5 Parameter Gain (dB) Input R.Loss (dB) Output R.Loss (dB) P1dB (dBm) Output IP3 Min of USB & LSB (dBm) NF (dB) Directivity (dB) DC Current (mA) Freq. 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 13.7 15.8 16.2 16.4 15.9 14.1 4.4 10.4 15.4 14.0 15.6 23.0 4.9 9.8 14.7 18.9 14.8 13.1 18.3 19.3 18.7 17.7 16.9 16.8 30.3 31.3 30.1 29.7 28.9 29.4 4.7 4.8 4.7 5.0 5.0 5.2 26.0 21.1 19.3 17.1 16.5 18.4 DC 77 Min Average Max 16.0 16.0 16.1 17.3 17.4 17.4 17.8 17.8 17.9 18.1 18.1 18.2 17.8 18.0 18.1 17.0 17.2 17.3 5.2 5.3 5.4 10.1 10.2 10.4 14.6 14.8 15.0 24.0 25.2 25.8 31.1 33.5 35.5 29.8 32.7 36.6 12.9 13.1 13.4 22.0 22.6 23.1 25.9 27.3 29.7 18.8 19.8 20.4 15.6 16.5 17.1 15.0 15.7 16.3 18.7 18.7 18.9 18.8 18.9 19.0 18.6 18.7 18.8 18.1 18.2 18.3 17.2 17.3 17.4 16.8 16.9 17.1 30.9 31.1 31.1 31.3 31.4 31.6 30.8 30.9 31.1 29.7 29.9 30.0 28.5 28.7 28.8 27.9 28.2 28.3 4.7 4.8 4.9 4.4 4.6 4.7 4.2 4.4 4.4 4.3 4.4 4.5 4.3 4.4 4.5 4.3 4.4 4.5 31.8 32.1 32.4 30.8 31.4 31.8 26.2 26.8 27.1 21.5 22.1 22.4 19.4 19.9 20.2 19.0 19.5 19.7 74 75 76 Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 3 of 7 APPLICATION NOTE 3) PERFORMANCE COMPARISONa (TYPICAL), DC Voltage=2.8V: Parameter Gain (dB) Input R.Loss (dB) Output R.Loss (dB) P1dB (dBm) Output IP3 Min of USB & LSB (dBm) NF (dB) Directivity (dB) DC Current (mA) Freq. 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 3500 4500 500 750 1000 1500 2000 2500 3500 4500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 500 750 1000 1500 2000 2500 DC MNA-4+ MNA-4A+ (Original (Replacement Part) Part) 5 units on TB Qty-1 Qty-5 Min Average Max 12.3 14.2 14.3 14.3 14.2 15.1 15.2 15.3 14.4 15.4 15.4 15.5 14.6 15.4 15.4 15.6 14.4 14.9 15.0 15.2 12.7 14.2 14.3 14.4 4.4 5.5 5.6 5.7 10.4 10.3 10.4 10.6 15.2 14.5 14.6 14.7 14.1 22.2 22.6 23.4 15.3 26.9 30.6 33.8 18.6 30.4 33.3 35.9 5.3 15.4 16.3 17.0 2.9 8.0 8.5 9.1 4.6 12.1 12.4 12.6 8.4 13.3 13.6 13.8 11.0 12.7 12.9 13.0 12.8 11.7 11.9 12.0 11.1 11.2 11.4 11.6 9.2 11.3 11.6 11.7 8.8 12.6 13.1 14.0 7.5 11.8 12.3 12.6 13.2 10.7 11.0 11.3 14.5 11.5 11.7 12.0 14.6 11.8 12.0 12.2 14.4 11.9 12.1 12.3 13.9 12.0 12.2 12.4 14.0 12.1 12.2 12.4 24.7 22.8 23.1 23.4 25.6 23.3 23.5 23.8 25.3 23.5 23.7 24.0 25.7 23.4 23.5 23.8 25.6 23.4 23.5 23.7 25.8 23.2 23.3 23.4 4.8 4.9 5.0 5.0 4.9 4.6 4.7 4.7 4.9 4.4 4.5 4.5 5.0 4.5 4.5 4.6 5.1 4.5 4.5 4.6 5.2 4.5 4.5 4.6 28.2 35.3 35.8 36.6 22.8 30.0 30.7 31.1 20.4 26.2 26.9 27.3 17.3 22.4 23.1 23.4 15.8 20.5 21.1 21.4 17.2 19.7 20.3 20.6 71.1 69.6 70.6 71.7 Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 4 of 7 APPLICATION NOTE 4) PERFORMANCE COMPARISON CURVESa (TYPICAL),DC Supply=5V: Data of Replacement Part Data of Original Part Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 5 of 7 APPLICATION NOTE 5) PERFORMANCE COMPARISON CURVESa (TYPICAL),DC Supply=2.8V: Data of Replacement Part Data of Original Part Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 6 of 7 APPLICATION NOTE IMPORTANT NOTICE © 2015 Mini-Circuits This document is provided as an accommodation to Mini-Circuits customers in connection with Mini-Circuits parts only. In that regard, this document is for informational and guideline purposes only. Mini-Circuits assumes no responsibility for errors or omissions in this document or for any information contained herein. Mini-Circuits may change this document or the Mini-Circuits parts referenced herein (collectively, the “Materials”) from time to time, without notice. Mini-Circuits makes no commitment to update or correct any of the Materials, and Mini-Circuits shall have no responsibility whatsoever on account of any updates or corrections to the Materials or Mini-Circuits’ failure to do so. Mini-Circuits customers are solely responsible for the products, systems, and applications in which Mini-Circuits parts are incorporated or used. In that regard, customers are responsible for consulting with their own engineers and other appropriate professionals who are familiar with the specific products and systems into which Mini-Circuits’ parts are to be incorporated or used so that the proper selection, installation/integration, use and safeguards are made. Accordingly, Mini-Circuits assumes no liability therefore. In addition, your use of this document and the information contained herein is subject to Mini-Circuits’ standard terms of use, which are available at Mini-Circuits’ website at www.minicircuits.com/homepage/terms_of_use.html. Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation: (i) by Mini-Circuits of such thirdparty’s products, services, processes, or other information; or (ii) by any such third-party of Mini-Circuits or its products, services, processes, or other information. Notes: a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses. AN-60-082 Rev.: OR (M152856) 09/14/15 File: AN60081.com This document and its contents are the property of Mini-Circuits. Sheet 7 of 7