Matching Pad - Mini Circuits

Surface Mount
ALMP-5075+
ALMP-5075
Matching Pad
50/75Ω
DC to 3000 MHz
Maximum Ratings
Operating Temperature Storage Temperature Features
• excellent flatness, ±0.1 dB typ.
• excellent VSWR, 1.2:1 typ.
• wideband coverage, DC to 3000 MHz
• aqueous washable
• low cost
-40°C to 85°C
-55°C to 100°C
RF Input Power
0.25W
Permanent damage may occur if any of these limits are exceeded.
Pin Connections
50 OHM
2
75 OHM
6
CASE STYLE: CB518
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Applications
• 50 to 75 OHM wideband impedance matching
GROUND1,3,4,5,7,8,9,10
Electrical Specifications
Outline Drawing
FREQ.
(MHz)
ATTENUATION
(dB)
VSWR
(:1)
Flatness Max.
fL--fU
Nom.
DC-100
MHz
DC-3000
5.7±0.2
0.2
POWER
(W)
Max.
100-1000
MHz
1000-3000
MHz
DC-100
MHz
100-1000
MHz
1000-3000
MHz
0.4
0.4
1.06
1.4
1.45
0.25
Typical Performance Data
Frequency
(MHz)
Outline Dimensions ( inch
mm )
A
.27
6.86
B
.31
7.87
C
---
D
.090
2.29
H
.018
0.46
J
.074
1.88
K
.030
0.76
L
.290
7.37
E
.080
2.03
F
.055
1.40
G
.050
1.27
wt
grams
0.3
Attenuation
(dB)
75 Ω
5.73
5.73
5.73
5.74
5.76
1.001.01
1.001.01
1.001.01
1.001.01
1.001.03
300.00
600.00
1400.00
2000.00
3000.00
5.77
5.86
5.90
5.84
5.68
1.001.06
1.021.12
1.051.27
1.061.27
1.101.14
1.40
at RF level of -10 dBm
at RF level of -10 dBm
5.9
5.7
ALMP-5075
VSWR
50 ohm
1.30
6.1
VSWR
ATTENUATION (dB)
6.3
50 Ω
0.03
0.10
1.00
70.00
150.00
ALMP-5075
ATTENUATION
Demo Board MCL P/N: TB-25
Suggested PCB Layout (PL-211)
VSWR (:1)
75 ohm
1.20
1.10
5.5
0
500
1000
1500
2000
FREQUENCY (MHz)
2500
3000
1.00
0
500
1000
1500
2000
FREQUENCY (MHz)
2500
3000
electrical schematic
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected]
REV. C
M151107
ED-7340/2
ALMP-5075
DJ/TD/CP
150527