Ceramic LFCN-2400+ LFCN-2400 Low Pass Filter 50Ω DC(1) to 2400 MHz Features Maximum Ratings Operating Temperature -55°C to 100°C Storage Temperature -55°C to 100°C RF Power Input* 9W max. at 25°C * Passband rating, derate linearly to 4W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded. CASE STYLE: FV1206 • excellent power handling, 9W • small size • 5 sections • temperature stable • LTCC construction +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Applications Pin Connections RF IN 1 RF OUT 3 and Reel Available Tape cost at no extra • harmonic rejection • VHF/UHF transmitters/receivers • lab use GROUND2,4 Reel Size 7” Electrical Specifications(1,2) at 25°C Outline Drawing Parameter (ON TOP) Pass Band Stop Band (ON TOP) Devices/Reel 20, 50, 100, 200, 500,1000, 3000 Insertion Loss Freq. Cut-Off VSWR Rejection Loss VSWR F# Frequency (MHz) Min. Typ. Max. Unit DC-F1 F2 DC-F1 F3 F4-F5 F6 DC-2400 2800 DC-2400 3600 3700-4000 5000 — — — 20 — — — 3.0 1.2 — 30 20 1.5 — — — — — dB dB :1 dB dB dB F3-F6 3600-5000 — 20 — :1 (1) In Application where DC voltage is present at either input or output ports, coupling capacitors are required. Alternatively, if DC pass IN-OUT is required, Mini-Circuits’ “D” suffix version of this model will support DC IN-OUT, and provide>100 MOhm isolation to ground. (2) Measured on Mini-Circuits Characterization Test Board TB-270. Typical Frequency Response ATTENUATION (dB) PCB Land Pattern Electrical Schematic R F IN 40 R F OUT 20 3 1 DC F5 F1 F2 F3 F4 FREQUENCY F6 Typical Performance Data at 25°C Suggested Layout, Tolerance to be within ±.002 Frequency (MHz) Outline Dimensions ( inch mm ) A .126 3.20 B .063 1.60 C .037 0.94 D .020 0.51 E .032 0.81 F .009 0.23 G .169 4.29 H .087 2.21 J .024 0.61 K .122 3.10 L .024 0.61 M .087 2.21 N .012 0.30 P wt .071 grams 1.80 .020 Demo Board MCL P/N: TB-270 Suggested PCB Layout (PL-137) Insertion Loss (dB) VSWR (:1) 10.00 308.75 607.50 906.25 1205.00 0.03 0.10 0.20 0.39 0.41 1.01 1.07 1.20 1.31 1.19 1503.75 1802.50 2101.25 2400.00 2850.00 0.41 0.46 0.62 1.34 6.94 1.17 1.13 1.25 1.97 8.51 3000.00 3300.00 3600.00 4222.22 5000.00 10.53 19.58 38.18 23.66 19.90 14.15 37.77 115.81 78.97 34.75 LFCN-2400 INSERTION LOSS LFCN-2400 VSWR 1000 35 30 100 25 VSWR INSERTION LOSS (dB) 40 20 15 10 10 5 0 1 0 1000 2000 3000 4000 5000 0 1000 FREQUENCY (MHz) 2000 3000 4000 5000 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. M M151107 LFCN-2400 ED-9913/5 AD/CP/AM 150814