Crystal Clock Oscillator NZ2520S Series Wide Operating Temperature Range Type ■ Model name NZ2520SG Overall frequency tolerance of ±50 x 10–6. ■ Application ● For Automobile navigation system, automobile audio equipment, and camera. ● For Camcorder, Digital Still Camera, Notebook PC, and PDA. ■ Features Absolute maximum rating Supply voltage (VCC) –0.5 to +4.0 V Storage temperature range –55 to +125 °C ● Supports a wide temperature range: -40 to +105°C. ● Compact and light. Dimensions : 2.5 × 2.0 × 0.9 mm, weight : 0.02 g. ● This crystal clock oscillator can support low frequencies (from 1.5MHz) not easily achieved with crystal units of the same size. ● Taped units enable automatic mounting and IR Reflow (lead free) is possible. ● Lead-free. ● Conforms to AEC-Q200. ■ Specifications Model Item NZ2520SG Output level CMOS (MHz) 1.5 ≤ F < 10 10 ≤ F < 20 20 ≤ F < 30 30 ≤ F < 40 40 ≤ F < 50 50 ≤ F < 60 60 ≤ F < 70 70 ≤ F ≤ 80 Nominal frequency range *1 Operating temperature range *2 (°C) +1.8 V, 25 °C Current consumption max During operation +2.5 V, 25 °C (mA) +3.0 V, 25 °C +3.3 V, 25 °C During standby –40 to +105 (×10–6) Overall frequency tolerance +1.8 V to +3.3 V, 25 °C ±50 2.5 3.5 4.0 4.5 5.0 5.5 6.0 6.5 3.0 4.0 4.5 5.0 5.5 6.0 6.5 7.0 3.5 4.5 5.0 5.5 6.0 6.5 7.5 8.5 3.5 4.5 5.0 5.5 6.0 7.0 8.0 9.0 (μA) 10 VOL max/VOH min (V) 0.1 VCC/0.9 VCC Tr max/Tf max (ns) 5/5 Symmetry min. to max. (%) 45 to 55 Load (CL) max (pF) 15 Start-up time max (ms) 4 Standby function Available (Three-state) *1: If you require a product with a frequency not given above, please contact us. *2: If you require a product with an operating temperature range not given above, please contact us. ■ List of Codes for Placing an Order List of Codes for Placing an Order Supply voltage (VCC) (V) NSA3483B NSA3484B NSA3485B NSA3486B +1.8±0.18 +2.5±0.25 +3.0±0.3 +3.3±0.33 - 60 - 13A_0730_NZ2520SG_50_e Crystal Clock Oscillator NZ2520S Series Wide Operating Temperature Range Type ■ Dimensions ■ Output Waveform <CMOS> mm 2.50±0.10 2.00±0.10 #1 STAND-BY #2 GND #3 OUTPUT VCC 1/2V DD #4 VCC VCC 0.1V DD 0.9 max VOH VCC 0.9V DD 0.3 0.6 Tf Tr Terminal land connections VOL 0V t T Land pattern (Typical) 0.8±0.1 #1 1.65±0.1 #3 Symmetry = t/T × 100 [%] 1.0 #3 ■ Standby Function 1.25 0.7±0.1 1.25±0.1 #4 1.0 #4 #2 Cby=0.01μF #1 1.65 #1 Input #2 Level H (0.7 VCC ≤ VIH ≤ VCC) or OPEN is selected. Level L (VIL ≤ 0.3 VCC) is selected. Mount an approx. 0.01 μF bypass capacitor between VCC and GND (close to the product) #3 Output Oscillation output ON High impedance ■ How to Specify an Order When ordering our products, specify them with an “Ordering Code” that consists of the following: Model name – Frequency (up to 9 digits) M – Number for specifying an order Example 1 :When ordering a product with model name: NZ2520SG, frequency: 20 MHz, overall frequency tolerance: ±50 x 10–6, and power supply voltage: 1.8 V Ordering Code: NZ2520SG – 20.000000M – NSA3483B Example 2 :When ordering a product with model name: NZ2520SG, frequency: 20 MHz, overall frequency tolerance: ±50 x 10–6, and power supply voltage: 3.3 V Ordering Code: NZ2520SG – 20.000000M – NSA3486B If you have any queries concerning our standard frequencies and numbers for specifying orders, please contact our sales representatives or visit our homepage (http://www.ndk.com/). - 61 - 13A_0730_NZ2520SG_50_e