Crystal Oscillator Model Name NT2016SB Temperature Compensated Crystal Oscillator with Enable/Disable (Stand-by) Function (TCXO) NT2016S Series ■ Main Application For mobile phones, etc. ■ Features ● Supports low power supply voltage. (Supports DC +1.7 V to +3.3 V.) ● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm, 0.0022 cm3, and 0.008 g, respectively. ● With an Enable/Disable (Stand-by) function. ● Low power consumption. ● A surface-mount crystal oscillator. (Reflow soldering is possible.) ● Lead-free. Meets the requirements for re-flow profiling using lead-free solder. ■ Specifications Model Item •Frequency setting conditions NT2016SB Nominal frequency (MHz) 1. Frequencies are set at normal temperatures (+25±2 °C). 13 to 52 Standard frequency (MHz) 16.368, 16.369, 19.2, 26, 33.6 Supply voltage [VCC] (V) 38.4 52 •If you require a product with a different frequency, power supply voltage, frequency control range, etc. to the standard +1.8 Load impedance specifications, please contact us with your enquiries. 10 kΩ//10 pF Current consumption Enable (mA) Disable (μA) Max. 1.5 Max. 1.7 Max. 2.0 *1. A DC-cut capacitor is not embedded in this crystal Max. 2 Output voltage oscillator. Connect a DC-cut capacitor (1,000 pF) to the Min. 0.8 V(p-p) (DC Coupling *1) Frequency/Temperature characteristics Max. ±2.0×10–6 Operating temperature range (°C) –30 to +85 Storage temperature range (°C) –40 to +85 Frequency/Voltage coefficient line-out terminal of the oscillator. *2. This is a representative specification. The specifications may change according to the frequency that you request. Max. ±0.1×10–6/+1.8 V±5 % Frequency/Load coefficient Max. ±0.1×10–6/(10 kΩ//10 pF) ±10 % Long-term frequency stability Max. ±1.0×10–6/year Enable : 80%VCC to VCC, Disable : 0V to 20%VCC Enable/Disable function ■ Dimensions ■ List of Ordering Codes mm 2.0 ± 0.1 #3 Terminal land connections 1.6 ± 0.1 #4 #1 #2 GND #3 OUTPUT #4 VCC 0.4 ± 0.1 0.6 1.2 0.6 NT2016SB-16.368M-NSA3560A 16.369 NT2016SB-16.369M-NSA3560A 19.2 NT2016SB-19.2M-NSA3560A 26 NT2016SB-26M-NSA3560B 33.6 NT2016SB-33.6M-NSA3560B 38.4 NT2016SB-38.4M-NSA3560C 52 NT2016SB-52M-NSA3560D Ordering Code The above frequencies are NDK’s standard frequencies. Frequencies other than the above are available. Feel free to contact our sales representatives. 0.8 0.4 0.8 #3 0.7 ± 0.1 #2 Land pattern (Typical) 0.4 ± 0.05 1.2 ± 0.05 0.6 ± 0.1 VCONT Enable/Disable #2 #1 #4 #1 Frequency (MHz) 16.368 - 13 - 13B_1227_NT2016SB_E/D_e