1N7066 thru 1N7068 and 1N7066SMS thru 1N7068SMS

1N7066 thru 1N7068
and
1N7066SMS thru 1N7068SMS
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
10 AMP
100 ─ 200 VOLTS
30 ns HYPERFAST RECOVERY
RECTIFIER
Designer’s Data Sheet
Part Number/Ordering Information 1/
1N70 __ __ __
│ │ └ Screening 2/
│ │
__ = Not Screened
│ │
TX = TX Level
│ │
TXV = TXV
│ │
S = S Level
│ │
│ └ Package Type
│
__ = Axial Leaded
│
SMS = Surface Mount Square Tab
│
│
└ Voltage/Family
66 = 100V
67 = 150V
68 = 200V












FEATURES:
Hyper fast reverse recovery: 30ns maximum 4/
High surge current: 350 A maximum
Hermetically sealed
Low forward voltage drop .95 @10A
Void free ceramic frit glass construction
High temperature category I eutectic metallurgical
bond
Solid silver leads
Available in axial & square tab versions
TX, TXV, and S-level screening available 2/
Available as a QPL product per MIL-PRF-19500/768
Axial lead higher current replacements for:
1N5807, 1N5809, 1N5811
Possible SMS replacements for stud mount:
1N5812, 1N5814, 1N5816
MAXIMUM RATINGS 3/
RATING
Peak Repetitive Reverse Voltage
and
DC Blocking Voltage
1N7066
1N7067
1N7068
Average Rectified Forward Current
(Axial TL ≤ 55°C; SMS TEC ≤ 100°C ) 5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, VRWM = rated,
allow junction to reach equilibrium between pulses, TA= 25°C)
Operating & Storage Temperature
Thermal Resistance
Junction to Lead for Axial, L =.125"
Junction to End Tab for Surface Mount
NOTES:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ IF = 1A, IR = 1A, IRR = 0.1A, TA = 25°C
5/ Operating at higher IO currents may be achieved based on specific application
and device mounting if TJ is maintained below 175°C.
SYMBOL
VALUE
UNIT
VRRM
VRWM
VR
100
150
200
Volts
IO
10
Amps
IFSM
350
Amps
TJ and
TSTG
RθJL
RθJE
-65 to
+175
8
4.5
Axial Leaded
°C
°C/W
SMS
.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0119J
DOC
1N7066 thru 1N7068
and
1N7066SMS thru 1N7068SMS
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
ELECTRICAL CHARACTERISTICS 3/
CHARACTERISTICS
IF= 6.0 Adc
IF= 10 Adc
IF= 20 Adc
IF= 6.0 Adc, TA= +125°C
IF= 6.0 Adc, TA= +150°C
IF= 6.0 Adc, TA= -55°C
TA= +25°C
TA= +125°C
TA= +150°C
1N7066
1N7067
1N7068
Instantaneous Forward Voltage Drop
300 μs pulse
Reverse Leakage Current
At rated VR, 300 μs pulse
Breakdown Voltage
IR= 100 µA
Junction Capacitance
VR= 10 Vdc, f= 1 MHz
Reverse Recovery Time
IF= 1 A, IR= 1 A, IRR= 0.1 A
SYMBOL
LIMIT
VF1
VF2
VF3
VF4
VF5
VF6
IR1
IR2
IR3
0.900
0.950
1.050
0.850
0.780
1.050
1
100
500
110
160
210
BVR
UNIT
Vdc
μA
μA
μA
V
CJ
80
pF
trr
30
ns
Package Outlines:
DIMENSIONS (inches)
DIM.
A
B
C
D
Minimum
.135
.135
.036
.900
Maximum
.165
.155
.042
1.30
AXIAL
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DIMENSIONS (inches)
DIM.
A
B
C
D
Minimum
.172
.180
.020
.002
Maximum
.180
.220
.028
---
SMS
DATA SHEET #: RC0119J
DOC