Solid State Devices, Inc. SFS3027 - SFS3029 Series 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ SFS302 ___ ___ ___ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ └ └ 0.5 AMP, 30 - 100 Volt SILICON CONTROLLED RECTIFIER Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Package S.22 = SMD.22 /18 = TO-18 Voltage/Family 7 = 30V 8 = 60V 9 = 100V FEATURES: Passivated planar construction Low on-state voltage and fast switching Hermetically Sealed surface mount power package MAXIMUM RATINGS3/ Symbol Value Units Peak Repetitive Reverse Voltage and DC Blocking Voltage SFS3027 SFS3028 SFS3029 VDRM VRRM 30 60 100 Volts Non-Repetitive Peak Reverse Blocking Voltage (t < 5.0 ms) SFS3027 SFS3028 SFS3029 VRSM 50 100 200 Volts IT (RMS) 0.5 Amps (One Cycle, 60 Hz ) ITSM 8 Amps Peak Gate Power PGM 0.1 Watts Average Gate Current IG(ave) 0.025 Amps Peak Gate Current IGM 0.25 Amps Reverse Gate Current IGR 0.003 Amps Reverse Gate Voltage VGM 5.0 Volts TJ -65 to +150 °C Storage Temperature Range Tstg -65 to +200 °C Thermal Resistance, Junction to Case RθJC 15 °C/W RMS On-State Current, (All Conduction Angles, TC = 100°C) Peak Non-Repetitive Surge Current Operating Junction Temperature Range NOTES: SMD.22 TO-18 1/ For ordering information, price, operating curves, and availability- Contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ Unless otherwise specified, all electrical characteristics @25°C. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR010C DOC SFS3027 - SFS3029 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS3/ Peak Reverse Blocking Current Rated VRRM, RGK = 1000 Ω Peak Forward Blocking Current Rated VDRM, RGK = 1000 Ω Symbol Min Typical Max Unit TC = 25°C TC = 150°C IRRM –– 0.08 0.15 0.1 50 μA TC = 25°C TC = 150°C IDRM –– 0.08 0.15 0.1 20 μA VTM 0.8 1.1 1.5 V TC = 25°C TC = -65°C IGT –– –– 25 50 200 1200 μA TC = 25°C TC = -65°C TC = 150°C VGT 0.4 0.6 0.1 0.55 0.75 0.20 0.8 1.1 0.6 V TC = 25°C TC = -65°C TC = 150°C IH 0.3 0.5 0.05 1.0 1.5 0.38 5.0 10.0 1.0 mA Peak On-State Voltage IF = 1.0 A pulse Gate Trigger Current VD = 5 VDC, RL = 100 Ω, Re = 10 kΩ Gate Trigger Voltage VD = 5 VDC, RL = 100 Ω, Re = 100 Ω Holding Current VD = 5 VDC, RGK = 1000 Ω Case Outline: SMD.22 PAD 1: ANODE PAD 2: CATHODE PAD 3: GATE Case Outline: TO-18 PIN 1: CATHODE PIN 2: GATE PIN 3: ANODE NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SCR010C DOC