SPD0801 - SPD1001SMS and SPD0801SMS - SPD1001SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Designer’s Data Sheet 1 AMP SCHOTTKY RECTIFIER Part Number / Ordering Information1/ SPD ___ ___ ___ │ │ │ │ │ │ │ │ │ └ 80-100 VOLTS │ └ Screening2/ │ ___ = Not Screened TX = TX Level │ TXV = TXV Level │ S = S-Level │ └ Package FEATURES: ____ = Axial Leaded SMS = Surface Mount Square Tab Voltage / Family 0801 = 80V 0901 = 90V 1001 = 100V Extremely Low Forward Voltage Drop High Surge Capability PIV to 100 Volts Low Reverse Leakage Current High Voltage Replacement for 1N5817-1N5819 Series Surface Mount Versions Available TX, TXV, and Space Level Screening Available2/ MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage SPD0801 SPD0901 SPD1001 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25°C) Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on IO, allow junction to reach equilibrium between pulses, TA=25°C) Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L=3/8” Junction to End NOTES: Symbol Value Units VRRM VRWM VR 80 90 100 Volts IO 1 Amps IFSM 40 Amps TOP & Tstg -55 to +125 RɵJL RɵJE 46 20 Axial Leaded 1/ For ordering information, price, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0115C ° C ° C/W Surface Mount Square Tab (SMS) DOC Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 0.5ADC, TA = 25°C, 300 μs Pulse) (IF = 1ADC, TA = 25°C, 300 μs Pulse) Instantaneous Forward Voltage Drop (IF = 1ADC, TA = -55°C, 300 μs Pulse) Reverse Leakage Current (Rated VR, TA = 25°C, 300 μs minimum Pulse) Reverse Leakage Current (Rated VR, TA = 100°C, 300 μs minimum Pulse) Junction Capacitance (VR = 10 VDC, TA = 25°C, f = 1 MHz) SPD0801 – SPD1001SMS and SPD0801SMS - SPD1001SMS Symbol Max Unit VF 0.75 0.95 Vdc VF 1.0 Vdc IR 200 µA IR 10 mA CJ 30 pF Case Outline: Axial DIMENSIONS DIM A B C D MIN .080” .160” 1.00” .028” MAX .107” .205” --.032” Case Outline: SMS DIMENSIONS DIM A B C D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0115C MIN .125” .180” .022” .090” MAX .135” .235” .028” .110” DOC