PB Custom Series MECHANICAL DIMENSIONS (Unit: mm) FLANGE MOUNT 50.1 40.0 30.3 28.5 4-R5 22.5 21.6 240.0 3.3 45.5 3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT) 41.4 46.8 55.8 G 28.3 20.6 SNAP-IN (SNT) FEATURES The filters in this series are designed to meet the ever changing needs of the Electronic and Medical industry. The filters can be made with various cable assemblies with or without braided shields to protect equipment when the noise generating device is located at a distance within the equipment. The shielded filter assemblies contain braiding that terminates 360 degrees inside the metal can to prevent any noise entering the filter. PDI can mold custom connectors at the end of the wires in any form or shape while the braiding is twisted to form the drain wire. 31.0 24.0 Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. TECHNICAL DATA • Rated Voltage: 125/250VAC • Rated Current: 1A, 2A, 3A, 6A, 10A, 15A • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 115VAC 60Hz: 0.25mA, max @ 250VAC 50Hz: 0.45mA, max • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 500VDC • Temperature Range: -25C to +85C 21.2 4-R2 4-R2 28.5 29.6 SUGGESTED PANEL CUTOUT** SUGGESTED PANEL CUTOUT** (MOUNTING FROM FRONT) (MOUNTING FROM FRONT) SNT Option SSI Option 3.75 55.2 43.6 A ground choke can be added to enhance the grounding ability of the circuit. A bleeder resistor is added to prevent excessive voltages from developing across the filter capacitors when there is no load. APPLICATIONS 21.9 28.3 20.6 FLANGE MOUNT (B) 52 40.0 40 28.5 4-R5 21.6 25 2- 30.3 3.3 45.5 3.5 SUGGESTED PANEL CUTOUT (MOUNTING FROM FRONT) 41.4 46.8 55.8 G 28.3 20.6 Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 11 PB Custom Series (contact PDI with your custom options) 01 02 03 06 10 15* 1 L mH L L' R Cy CX G' L Cy N LOAD = = = = = = LINE CURRENT RATING (A): SCHEMATICS N' L mH G Lg TERMINAL: 2 QUICK CONNECT, SOLDER, WIRE HARNESS L mH NO BLEEDER RESISTOR & NO GROUND CHOKE BLEEDER RESISTOR (1/4 W, 1M) BLEEDER RESISTOR (1/2 W, 1M) N BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE G L' Cy R G' L Cy LOAD L LINE OPTIONS: N' L mH Lg BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE 3 GROUND CHOKE ONLY L mH LINE SEE SCHEMATICS R Cy CX L G' Cy N' N ATTENUATION CODE TABLE: Non-Medical applications, select Attenuation code with corresponding component values from the table. ✘ 1.05 ✘ ✘ ✘ ✘ ✘ ✘ 1.05 1.05 10A 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.3 0.3 0.3 15A 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 = = = = = = = = = = = A B C D E F G H I J K = = = = = = = = M1 M2 M3 M4 M5 M6 M7 M8 Medical applications, select Attenuation code with corresponding component values from the table. Cx (µF) 0.1 0.015 0.1 0.047 0.033 0.22 0.047 0.033 1A 6.5 1.9 3.7 4.6 9.5 6.5 10.5 5 TYPE OF MOUNTING: Inductance Per Current Rating (mH) 2A 3A 6A 8A 3.8 2.5 0.8 1.05 ✘ 1.5 1.1 0.6 ✘ ✘ 2.7 1.8 ✘ 3.4 2.5 0.9 ✘ 4.3 1.8 0.85 4.0 2.5 0.8 1.05 ✘ 4 1.2 0.53 ✘ ✘ 3.7 0.6 10A 0.2 0.3 0.3 0.3 0.3 0.3 15A 0.2 0.2 ✘ 0.2 0.2 0.2 ✘ ✘ 0.2 ✘ 4 L mH L L' R L N N' L mH G MEDICAL SCHEMATICS 1M L mH L L' R CX L N N' L mH G LINE SNAP-IN TABS - TOP BOTTOM SNAP-IN TABS - SIDE L mH L' R L N CX N' L mH G TERMINATION OPTIONS: G' Lg L SPECIAL FLANGE MOUNT G' Lg 2M STANDARD FLANGE MOUNT LOAD 8A 1.05 Lg LOAD (mH) LOAD 1A 6.5 1.9 3.7 10.5 4.6 9.5 10.5 5.0 10.5 6.5 6.5 Inductance Per Current Rating 2A 3A 6A 3.8 2.5 0.8 1.5 1.1 0.6 2.7 1.8 0.8 4.2 2.5 1.05 3.4 2.5 0.9 4.3 1.8 0.85 4.0 1.2 0.53 3.7 1.8 0.6 6.5 2.5 1.05 4.0 2.5 0.8 4.0 2.5 0.8 G LINE Cy (pF) 2200 3300 3300 1000 3300 3300 2200 2200 without Cy 2200 3300 L mH LINE Cx (µF) 0.1 0.015 0.1 0.1 0.047 0.033 0.047 0.033 without Cx 0.22 0.22 LOAD L' L COMPONENT LOCATION: G' Lg TERMINATIONS CAN BE MOLDED OR CAN TERMINALTE WITH ANY TERMINALS REQUESTED BY THE CUSTOMER. *10A for TUV; 15A for UL & cUL ✘ Contact PDI for availability 12 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com