www.make-ps.com E-mail:[email protected] 500E series Single Output DC/DC Converter FEATURES • • • • • • • • Up to 70% Efficiency Single output, 5 watt converters 500 VDC Input / Output Isolation Continuous Short Circuit Protection Continuous Six-Sided Shielding UL1950 Approved, File No. E104645 CSA 22.2 Approved, File No. LR89494 >1,300,000 Hours MTBF INPUT CHARACTERISTICS DESCRIPTIONS The 500E series is a family of compact high performance 5 W DC/DC converters that operate over input voltage ranges of 4.3-6 VDC, 10.3-15.0 VDC, 15.5-22.5 VDC, 20.4-30.0 VDC, 24.2-36.0 VDC and 41.3-60.0 VDC and provide precisely regulated output voltages of 5V, 12V and 15V. The -30oC to +75oC operating temperature range makes it ideal for data communication equipment, mobile battery driven equipment, distributed power systems, telecommunication equipment, mixed analog/digital subsystems, process/ machine control equipment, computer peripheral systems industrial robot systems. OUTPUT CHARACTERISTICS Output Voltage Set Point Line Regulation Load Regulation Ripple/Noise Short Circuit Protection Temperature Coefficient Min Typ Max Unit/Comments ±3 % Output voltage at nominal line & FL ±0.3 % Output voltage measured from min. input line to maximum ±0.3 % Output voltage measured from FL to no load 20 mV p-p, Nom.Line @FL, 20MHz B.W., using 1 μf bypass capacitor Continuous, Automatic Recovery ±0.01 % per oC Min Typ Max Unit/Comments Input Voltage 5 VDC Input Models 12 VDC Input Models 24 VDC Input Models 28 VDC Input Models 48 VDC Input Models Input Filter 4.65 10.9 21.6 25.2 43.2 5 12 24 28 48 5.25 13.2 26.4 30.8 52.8 VDC @ FL VDC @ FL VDC @ FL VDC @ FL VDC @ FL Pi Filter GENERAL CHARACTERISTICS Switching Frequency Isolation Voltage Isolation Resistance Isolation Capacitance MTBF (MIL-HBK-217F) Min Typ Max Unit/Comments kHz 100 VDC, 1 minute 500 Mohm, 500VDC 1000 pF, 100kHz, 1Volt 70 Million Hours, 1.3 +25oC, Ground Benign >> 1 www.make-ps.com E-mail:[email protected] PHYSICAL CHARACTERISTICS ENVIRONMENTAL SPECIFICATIONS Operating Temp. Range Storage Temp. Range Relative Humidity Min -30 -40 Typ Max +75 +125 +95 Cooling Unit/Comments C; Ambient o C % Humidity; noncondensing Free-Air Convection o Unit/Comments 2.0 X 2.0 X 0.4 inches (50.8 X 50.8 X 10.2 mm) Black Coated Metal Negative Output Pin UL94V-0 2.6 oz. Case Size Case Material Shield Connection Flammability Weight OUTLINE DRAWING CASE “A” .40 [10.2] CASE “ A1” (OPTIONAL) 0.04 DIA [1.0] .40 [10.2] .60 [15.2] 2.00 [50.8] 1.70 [43.2] .40 [10.2] +Vout N.C. BOTTOM -Vout ON/OFF CONTROL (OPTIONAL) +Vin -Vin SIDE .80 [20.3] 2.00 [50.8] ON/OFF CONTROL (OPTIONAL) BOTTOM .85 [21.6] SIDE N.C. 2.00 [50.8] .85 [21.6] -Vin .90 [22.9] 2.00 [50.8] +Vout +Vin 1.25 [31.8] .60 [15.2] .20 [5.1] .20 [5.1] .15 [3.8] 0.04 DIA [1.0] .18 [4.4] .22 [5.6] MIN. -Vout .15 [3.8] .40 [10.2] .22 [5.6]MIN. .40 [10.2] Notes: 1. Unless otherwise specified dimensions are in inches (mm). Tolerances Inches mm X.XX = ±0.02 X.X = ±0.5 X.XXX= ±0.010 X.XX = ±0.25 2. Case A pinning is standard. Case A model numbers do not require suffixing. 3. Case A1 pinning is optional. Case A1 model numbers must be suffixed with “A1”. Example: 512S48E-A1 All specifications are typical at nominal input, nominal load and 25° C unless otherwise specified. External, low ESR, 10 microfarad (minimum) capacitor across input is recommended for operation. >> 2 www.make-ps.com E-mail:[email protected] HOW TO ORDER HOW TO ORDER 5 XX S XX E - A1 - Y Wattage Output Voltage Output Configuration, ( S=Single, D=Dual) ROHS Compliant Case D1 pinning is optional Nominal Input Voltage Case A pinning is standard. Case A model numbers do not require suffixing. Case A1 pinning is optional. Case A1 model numbers must be suffixed with “ A1”. Example: 512S48E-A1 INPUT VOLTAGE RANGE VS OUTPUT LOAD Input Voltage Range (VDC) at: Nominal Input (VDC) 5 12 24 28 48 20% Load 40% Load 60% Load 100% Load 4.30 - 6.00 10.3 - 15.0 20.4 - 30.0 24.2 - 36.0 41.3 - 60.0 4.40 - 5.70 10.4 - 14.6 20.6 - 29.0 24.5 - 34.0 42.0 - 58.0 4.55 - 5.60 10.6 - 13.6 21.0 - 27.0 24.9 - 31.3 42.3 - 54.4 4.65 - 5.25 10.9 - 13.2 21.6 - 26.4 25.2 - 30.8 43.2 - 52.8 >> 3 www.make-ps.com E-mail:[email protected] MODEL SELECTION CHART Model 505S5E 512S5E 515S5E 505S12E 512S12E 515S12E 505S24E 512S24E 515S24E 505S28E 512S28E 515S28E 505S48E 512S48E 515S48E Nominal Input Voltage (VDC) Output Voltage (VDC) Full Load Output Current (mA) No Load Input Current (mA) Full Load Input Current (mA) Efficiency @ FL (%) Case Style 5 5 5 12 12 12 24 24 24 28 28 28 48 48 48 5 12 15 5 12 15 5 12 15 5 12 15 5 12 15 1000 450 350 1000 450 350 1000 450 350 1000 450 350 1000 450 350 90 80 70 40 40 40 20 20 20 20 15 15 11 11 11 1580 1650 1580 600 750 625 360 360 312 255 287 268 160 168 156 67 65 66 69 60 70 70 67 70 70 67 70 70 67 70 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 A or A1 >> 4