RF Characterization Report MH113-MH1RP-MH1RP Description: MH113, Micro RF Cable Assembly, 1.13mm Cable Diameter Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 2/24/2014 All Rights Reserved RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Table of Contents Test Setup Information .................................................................................................... 1 Scope: ......................................................................................................................... 1 Product Description: .................................................................................................... 1 Test Calibration:........................................................................................................... 1 Adapter Use: ................................................................................................................ 2 Definition of Assembly under Test: .............................................................................. 2 Port Designations: ....................................................................................................... 2 Legend for Plots:.......................................................................................................... 2 Results Summary ............................................................................................................ 3 Return Loss .............................................................................................................. 3 SWR......................................................................................................................... 4 Insertion Loss ........................................................................................................... 5 Instrument Setup: ............................................................................................................ 6 Test Environment: ........................................................................................................... 6 Samtec Inc. 520 Park East Blvd. New Albany IN 47151-1147 USA ©Samtec, Inc. 2005 WWW.SAMTEC.COM 1-800-SAMTEC-9 (US & Canada) [email protected] Page:ii Phone: 812-944-6733 Fax: 812-948-5047 Report Revision: 2/24/2014 All Rights Reserved RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Test Setup Information Scope: To perform characterization tests, Insertion Loss, Return Loss and Voltage Standing Wave Ratio. Product Description: Part Number MH113-MH1RP-MH1RP Length Qty 305mm 5 Termination – End 1 MH1, Right Angle Plug Termination – End 2 MH1, Right Angle Plug 1.13mm Dia. Test Calibration: Calibration is performed using the 50 ohm Agilent mechanical calibration kit, PN 85052D. Yellow line depicted in picture below represents the approximate calibrated reference plane at Ports 1 and 2. Residual effects from any uncalibrated adapter interface are inclusive to all measurements. [email protected] Report Revision: 2/24/2014 Page:1 RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Adapter Use: Each port uses at least one adapter capable of mating to the assembly under test. Any supplementary adapter will contribute additional electrical characteristics to the measured data. Any use of additional adapters is noted. SMA (m) to MH1 (f), QTY. 2, Samtec Part# CCS-179666-01-CN, Range: 0-6 GHz Definition of Assembly under Test: The performance characteristics include the interface with adapters. Port Designations: The connector attached to port 1 of the VNA is “End 1” from the part number callout. Insertion Loss is incident power transmission S21. Return Loss / VSWR is incident reflected power S11. Legend for Plots: Five samples are tested. 5 – MH113-MH1RP-MH1RP-0305 respectively labeled 01 through 05. Each sample is 305 mm in length. Graphical representations include the worst and best case responses of Insertion Loss, Return Loss and Standing Wave Ratio. Sample five is the best case response. Sample three is the worst case response. Waveform representations of samples 01, 02, & 04 are available but not included in this report. [email protected] Report Revision: 2/24/2014 Page:2 RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Results Summary Return Loss [email protected] Report Revision: 2/24/2014 Page:3 RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter SWR [email protected] Report Revision: 2/24/2014 Page:4 RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Insertion Loss [email protected] Report Revision: 2/24/2014 Page:5 RF Characterization Report Series: MH113, RF Cable Assembly, 50 Ohm, Description: End 1: MH1 RA Plug, End 2: MH1 RA Plug, 1.13mm Coaxial Cable Diameter Instrument Setup: Network Analyzer Mechanical Calibration Kit Averaging Factor Smoothing IF Bandwidth Sweep Start Sweep End Points Calibration File Test Cables Agilent E8364B PNA/N4421B Series (10 MHz -50GHz) Default 2-Port Configuration 85052D 0 Off 1 KHz 10 MHz 26.5 GHz 2000 4P_10m-26.5g_3.5f-pna1_3.5f-ts2_sma-pna2_sma-ts4 Gore 0Z0CJ0CK0360 Test Environment: (A Typical set-up, actual part not depicted.) [email protected] Report Revision: 2/24/2014 Page:6