FT5–15–03.0–L–DV–TH F-215 FT5–15–01.0–L–DV–TH FS5–15–04.0–L–DV–TH FS5–30–04.0–L–DV–TH FT5–30–01–L–RA (0,50 mm) .0197" FT5, FS5 SERIES HIGH SPEED FLOATING CONTACT SYSTEM FT5 Mates with: FS5 FT5 FS5 Mates with: FT5 NO. OF POSITIONS LEAD STYLE SPECIFICATIONS –01.0 For complete specifications and recommended PCB layouts see www.samtec.com?FT5 or www.samtec.com?FS5 = 1 mm Body Height Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze (FT5) BeCu (FS5) Weld Tab: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27 µm) Ni Current Rating: 1.8 A per pin (1 pin powered per row) Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes Lead-Free Solderable: Yes –15, –30 (Per Row) No. of positions per row x (0,50) .01969 + (6,80) .268 (0,50) .01969 RECOGNITIONS 01 A (1,40) .055 (0,65) .026 = Vertical = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail = Right Angle A –01.0 –03.0 (3,72) .146 (5,72) .225 LEAD STYLE OPTION Required callouts Leave blank for –RA –RA No. of positions per row x (0,50) .01969 + (10,10) .397 (0,20) .008 –P –TH = Pick & Place Pad (–DV only) = Through-hole weld tab –K = (5,00 mm) .197" DIA Polyimide Film Pick & Place Pad (–RA only) (8,65) (3,10) (4,00) .341 .122 .157 (0,50) .01969 01 -TR (1,38) .054 (4,18) .164 02 LEAD STYLE NO. OF POSITIONS TH –DV (0,20) .008 No. of positions per row x (0,50) .01969 + (8,00) .315 (2,60) .102 –DV OPTION FS5 –L –01 = Right Angle (0,20) .008 No. of positions per row x (0,50) .01969 + (5,58) .219 For complete scope of recognitions see www.samtec.com/quality ROW OPTION = 3 mm Body Height 02 (5,50) .217 (1,27) .050 –03.0 PLATING OPTION = Tape & Reel (2,25) .089 –RA OPTION PLATING OPTION DV TH K TR MATED HEIGHT MATED HEIGHT* FS5 LEAD STYLE –04.0 FT5 LEAD STYLE –04.0 = 4 mm Body Height –15, –30 (Per Row) –01.0 –03.0 (5,00) .197 (7,00) .276 = Through-hole weld tab = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail = Tape & Reel (9,40) .370 ALSO AVAILABLE (MOQ Required) 02 (4,40) .173 Note: Floating contact system provides 0,50 mm float in X and Y directions. Note: Some lengths, styles and options are non-standard, non-returnable. (0,45) .018 No. of positions per row x (0,50) .01969 + (3,00) .118 = (8,25 mm) .325" DIA Polyimide Film Pick & Place Pad –TR No. of positions per row x (0,50) .01969 + (6,80) .268 (0,50) .01969 01 *Processing conditions will affect mated height. –K –TH –L (0,12) .005 (1,40) .055 (1,27) .050 (6,65) .262 (0,30) .012 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. • Other lead counts • Surface mount weld tab Contact Samtec.