F-215 MPTC–01–80–01–01–01–L–RA–SD TM STRIP 30 MPSC–01–24–01–01–01–L–RA–SD (5,00 mm) .197"(PWR) (2,00 mm) .079"(SIG) MPTC-RA, MPSC-RA SERIES 30 A RIGHT ANGLE SIGNAL/POWER COMBO MPTC-RA Mates with: MPSC, MPCC MPSC-RA Mates with: MPTC MPTC PWR PINS SIG PINS PWR PINS TAIL LENGTH 01 SPECIFICATIONS For complete specifications see www.samtec.com?MPTC or www.samtec.com?MPSC Insulator Material: Black LCP Terminal/Contact Material: Signal: Phosphor Bronze Power: Copper Alloy Plating: Sn or Au over 50µ" (1,27 µm) Ni Current Rating: Testing Now! Operating Temp Range: -55°C to +105°C Voltage Rating: Power: 600 VAC/848 VDC Signal: 450 VAC/636 VDC RoHS Compliant: Yes Lead–Free Solderable: Yes RECOGNITIONS –01, –02 –24 –01, –02 = Power Pins Per End = Total Signal Pins = Power Pins Per End –80 –01 (3,56) .140 DIA A (15,70) .618 RA –L = Use with (1,60 mm) .062" Thick PCB Note: Available standard power pin combinations: MPTC-01-XX-01 or MPTC-02-XX-02. Contact Samtec for other options. = Total Signal Pins PLATING OPTION = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail (Power & Signal) –03 –T = Use with (2,36 mm) .093" Thick PCB = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) (12,27) .483 (12,45) .490 (2,00) .0787 (0,40) .016 01 (0,50) .020 –01 –02 (2,72) .107 (1,88) .074 (2,00) .0787 –SD or –LC is a required callout –SD = Screw Down –LC = Locking Clip (Manual placement required) A POWER PINS/END 24 SIGNAL PINS 80 SIGNAL PINS (8,18) .322 04 OTHER OPTION (35,25) 1.388 (63,25) 2.490 (45,25) 1.781 (73,25) 2.884 (3,25) .128 For complete scope of recognitions see www.samtec.com/quality MPSC PWR PINS SIG PINS PWR PINS 01 TAIL LENGTH PLATING OPTION RA OTHER OPTION ALSO AVAILABLE (MOQ Required) • Asymmetric power pin placement • Other pin counts Contact Samtec. –01, –02 = Power Pins Per End –24 = Total Signal Pins –80 = Total Signal Pins –01, –02 = Power Pins Per End Note: Available standard power pin combinations: MPSC-01-XX-01 or MPSC-02-XX-02. Contact Samtec for other options. A (3,56) .140 DIA (15,06) .593 –L = 10µ" (0,25 µm) Gold on contact, Matte Tin on tail (Power & Signal) –03 –T = Use with (2,36 mm) .093" Thick PCB = Matte Tin on contacts and tail (Power), Gold on contact, Matte Tin on tail (Signal) –SD or –LC is a required callout –SD = Screw Down –LC = Locking Clip (Manual placement required) (11,43) (2,50) .450 .098 (4,44) .175 A POWER PINS/END 24 SIGNAL PINS 80 SIGNAL PINS 04 (10,16) .400 Note: Some sizes, styles and options are non-standard, non-returnable. –01 = Use with (1,60 mm) .062" Thick PCB (2,72) .107 (2,00) .0787 (1,88) .074 (0,50) .020 SQ (2,00) .0787 01 (0,41) .016 –01 –02 (2,54) .100 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (36,52) 1.438 (64,52) 2.540 (46,52) 1.831 (74,52) 2.934