F-215 (Rev 17SEP15) FTSH–120–02–L–D FTSH–120–01–L–D–RA FTSH–125–01–F–D (1.27 mm) .050" FTSH SERIES THROUGH-HOLE MICRO HEADER SPECIFICATIONS Impedance matched for high speed applications (Mated with CLP Series) Mates with: FFSD, FFTP, CLP, FLE For complete specifications see www.samtec.com?FTSH Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1.27 µm) Ni Current Rating (FTSH/CLP): 3.3 A per pin (1 pin powered per row) Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes (1.27 mm) .050" micro pitch (2.51 mm) .099" Mates with socket strips or IDC cable Processing: Lead-Free Solderable: Yes Optional end shrouds and ejector shrouds Through-hole, right angle or surface mount RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality 1 FTSH NO. PINS PER ROW LEAD STYLE PLATING OPTION D TAIL OPTION OPTION OTHER OPTIONS FILE NO: 090871_0_000 LOCKING CLIP FFSD For single STRIP ASSEMBLY mating LOCKING CLIP cycle with the PC FFSD. BOARD Specify -LC after tail option. Lead Style -01 and 10 pins/row minimum. 5-9 pins/row not available in combination with keying shroud (-K). Specify LEAD STYLE from chart 02 thru 50 02 –F = Gold flash on post, Matte Tin on tail 100 • Molded Pick & Place pads • Other platings Contact Samtec. 01 –EX OPTION SHOWN No. of positions x (1.27) .050 (2.29) .090 (3.43) .135 A –EJ –EL –EP – 01 – 02 – 03 – 04 (2.29) .090 (1.27) .050 .120 CLP-DH (1.91) FLE .075 (1.65) CLP-D .065 (3.81) N/A .150 – EJ – EP – EL (15.77) .621 (5.87) .231 (6.53) .257 –RA (2.16) .085 MATES OPTION Z (5.08) WITH .200 – ES (1.55) (3.05) FFSD, .061 A = Ejector Shroud (Style –01 only) 10 pins/row min. 25 pins/row max. –RA not available (11.18) .440 (2.51) .099 LEAD STYLE Note: Some sizes, styles and options are non-standard, non-returnable. (0.40) .016 SQ 99 –K (1.27) .050 –EJ (3.20) .126 (2.29) .090 –K –EP = End Shroud with Guide Post (Style –02 & –03) 9 pins/row min. = End Shroud with Board Lock (Style –02 & –03) 9 pins/row min. (1.91) .075 DIA (3.05) .120 100 (1.27)01 .050 –ES = End Shroud (Style –02 & –03) 9 pins/row min. –EL 99 (1.27) .050 Note: See SFM/TFM for positive alignment feature. = Right Angle (1.17) .046 (1.27) .050 (3.43) .135 (MOQ Required) –RA = Polarized Position (Specify position of omited pin) (Not available with -EX options) = 10µ" (0.25 µm) Gold on post, Matte Tin on tail No. of positions x (1.27) .050 + Z Leave blank for straight tail –“XXX” –L (4.78) .188 02 ALSO AVAILABLE Leave blank for RIght Angle (2.29) .090 –ES –RA –ES WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (1.27) .050 = Keying Shroud for mating with FFSD (Style –01 only, 05, 08, 10, 13, 17, 20 & 25 pins/row only and 13, 17, 20 & 25 only with –EJ option)