RF-13 (Rev 14JUL14) RF405–00SJ7–00SJ7–0500 RF405–01SP1–10PN1–0500 RF405 SERIES 50Ω .086" DIA SEMI-FLEXIBLE CABLE SPECIFICATIONS Mates with: SMA, SMP, AFI Hand-formable semi-flexible cable For complete specifications see www.samtec.com?RF405 RF Connector: Shell Material: Brass (SMA, AFI-J), Au plated BeCu (SMP), BeCu (AFI-P) Contact Material: Brass (SMA, AFI-J), Au plated BeCu (SMP), BeCu (AFI-P) Impedance: 50Ω Frequency Range: 0~20 GHz (SMA), DC to 20 GHz (SMP) V.S.W.R: 1.4 max (SMA, SMP) Dielectric Withstanding: 1,000 Vrms (SMA), 500 Vrms min (SMP) Contact Resistance (SMA & SMP): Center Contact: 6mΩ max Outer Contact: 2mΩ max Insulator Resistance (SMA & SMP): 5,000 MΩ min RG 405 (.086") Cable: Impedance: 50Ω microwave Capacitance: 96.79 pF/meter Max Attenuation (cable only): 1.20 @ 1 GHz for 1 meter Conductor Size: 24 AWG (0,56 mm) .022" dia. Conductor Material: Silver plated copper clad steel Insulator Material: PTFE Shield Material: Tinned Copper RoHS Compliant: Yes THINK OUTSIDE THE CATALOG (2,18 mm) .086" DIA cable • Create a full system: cable assembly and board level mates, 50Ω and 75Ω solutions • 24-hour samples on standard products • Visit: rf.samtec.com Choice of SMA, SMP or AFI terminations END 1 CONNECTOR CABLE TYPE END 2 CONNECTOR Specify END OPTIONS from chart RF405 = (2,18 mm) .086" DIA 24 AWG Semi-flexible coax cable OVERALL LENGTH –“XXXX” = Overall Length in millimeters –0100 (100 mm) 3.94" minimum STRIPPED & TINNED (Dimensions in mm) –01SP1–01RP1 SHOWN CALLOUT A –3030 3.0 –4030 4.0 –4040 4.0 XXXX = OAL (millimeters) ALSO AVAILABLE (MOQ Required) • Additional stripping and tinning options Contact Samtec. OTHER SOLUTIONS • Cable connector kits (see cable components catalog pages) Note: Cable lengths longer than (1000 mm) 39.40" are not supported with S.I. test data. END OPTIONS –01SP1 = SMA Straight Plug (30µ" (0,76µm) Gold on Center Contact, Gold Flash on Shell) –01RP1 = SMA Right Angle Plug (30µ" (0,76µm) Gold on Center Contact, Gold Flash on Shell) –00SJ7 = SMP Straight Jack (10µ" (0,25µm) Gold on Center Contact, Gold Flash on Shell) –00RJ7 = SMP Right Angle Jack (10µ" (0,25µm) Gold on Center Contact, Gold Flash on Shell) WWW.SAMTEC.COM B 3.0 3.0 4.0 Both center conductor and braid shield are stripped, only the center conductor is tinned. END OPTIONS –10PN1 = AFI Straight Panel Mount Jack (10µ" (0,25 µm) Gold on Center Contact, Gold Flash on Shell) –10BH4 = AFI Straight Bulkhead Plug (10µ" (0,25 µm) Gold on Center Contact, Gold Flash on Shell) XXXX = Stripped & Tinned (End 2 callout) B A