F-215 ® ERCD–020–10.00–TEU–STR–3–R (0,80 mm) .0315" ERCD SERIES ERCD–050–08.00–SBR–STR–3–D ® EDGE RATE COAX CABLE ASSEMBLIES SPECIFICATIONSi For complete specifications and recommended PCB layouts see www.samtec.com?ERCD Cable: 34 AWG coax ribbon cable Signal Routing: 50Ω Single-Ended Plating: Au over 50µ" (1,27 µm) Ni Operating Temp Range: -25°C to +105°C Current Rating: 1.3 A per pin (2 adjacent pins powered) RoHS Compliant: Yes 34 AWG micro ribbon coax cable Rated @ 7dB Insertion Loss Cable Length ERCD 10" (0,25 m) 6.50 GHz / 13.00 Gbps Performance data for other cable lengths and complete test data available at www.samtec.com?ERCD or contact [email protected] RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality ERCD END TO END B DV to DV (23,47) .924 ® Broadside wiping contacts reduce unwanted crosstalk Mates with: ERF8, ERM8 (0,80 mm) .0315" pitch NO. POSITIONS PER ROW END NO. 1 WIRE LENGTH –010, –013, –020, –025, –030, –040, –050, –060 POSITIONS PER ROW –010 –013 –020 –025 –030 –040 –050 –060 (29,92) 1.178 –TTR = Wire Length in Inches (43,7 mm) 01.72" minimum = Terminal, Top Right 02 (22,66) .892 = Terminal, Top Left = Terminal, Bottom Right 02 01 01 –TBL = Terminal, Bottom Left WIRING OPTION –1 = Pin 1 to Pin 1 –2 = Pin 1 to Pin 2 LATCH Specify LATCH from chart (Required callout) –3 = Pin 1 to Pin N -1 –4 = Pin 1 to Pin N (25,06) .987 (30,66) 1.207 –STR LATCH (34,65) 1.364 = Socket, Top Right † –L (46,66) 1.837 –STL ♦ –R (54,66) 2.152 = Socket, Top Left (38,66) 1.522 A (62,66) 2.467 –SBR Note: Cable lengths longer than 40.00" (1 meter) are not supported with S.I. test data. Note: Design your High Speed Cable with Samtec’s High Speed Cable Solutionator® at www.samtec.com/hdr Note: Some lengths, styles and options are non-standard, non-returnable. –TTL –TBR OAL = Wire Length + B A END NO. 2 –“XX.XX” DV to Edge Mount (-TEX) (26,69) 1.051 Edge Mount (-TEX) Rugged metal latching system (18,75) .738 ♦ –F –SBL † –S = Socket, Bottom Left (13,76) .542 = Terminal, Edge Mount Up –TED = Terminal, Edge Mount Down END NO.1 (–STL SHOWN) * –B = Socket, Bottom Right –TEU (10,15) .400 (7,72) .304 –D –N END NO.2 (–TTR SHOWN) WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. * –C * –G * –T ASSEMBLY End No. 1 Standard Latch, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Standard Latch Both Ends Standard Latch No Housing Both Ends Standard Latch Both Ends Squeeze Latch End No. 1 Screw Option, End No. 2 Friction Latch End No. 1 Friction Latch, End No. 2 Screw Option Both Ends Screw Option End No. 1 Screw Option, End No. 2 Squeeze Latch End No. 1 Squeeze Latch, End No. 2 Screw Option –B, –C, –G & –T option only available –TEX on both ends. * with –L & –S option only available with † –TEX on second end. & –F option only available with ♦ –R –TEX on first end.