F-211 SUPPLEMENT T–1R7–02–G T, S SERIES MACHINED TERMINALS & SOCKETS Mates with: SC, SK, SP T–1R6– T–1R0– Specifications: T, S All T and S Series are available with a choice of Gold or Tin plating. Add -G or -T as a suffix to the part number shown. -G Plating: Au over 50µ" (1,27µm) Ni -T Plating: Sn over 50µ" (1,27µm) Ni or 100µ" (2,54µm) Cu Current Rating: 1 A except T-1S6 is 5A RECOMMENDED PC HOLE SIZE: LEAD SIZE HOLE SIZE (0,46) .018 DIA (0,51) .020 DIA (0,64) .025 DIA (0,76) .030 DIA (0,89) .035 DIA (1,14) .045 DIA (1,32) .052 DIA (0,61) .024 DIA (0,66) .026 DIA (0,79) .031 DIA (0,91) .036 DIA (1,04) .041 DIA (1,30) .051 DIA (1,47) .058 DIA (0,46) .018 SQ (0,64) .025 SQ (1,14) .045 SQ (0,76) .030 DIA (1,02) .040 DIA (1,75) .069 DIA (0,20) .008 x (0,71) .028 (0,25) .010 x (0,51) .020 (0,41) .016 x (0,51) .020 (0,41) .016 x (0,61) .024 (0,41) .016 x (0,79) .031 (0,89) .035 DIA (0,71) .028 DIA (0,79) .031 DIA (0,89) .035 DIA (1,04) .041 DIA (0,46) .018 DIA (1,32) .052 (3,18) .125 (1,78) .070 DIA (0,69) .027 B (0,64) .025 DIA C REF (0,51) .020 (1,55) .061 DIA (0,46) .018 DIA Part No. T–1R6– A B TAIL (2,74) .108 HEAD (0,51) .020 (4,22) .166 (1,78) .070 DIA (1,55) .061 DIA A (1,32) .052 C (0,71) .028 (1,32) .052 DIA (3,96) .156 (0,46) .018 DIA OAL (7,62) .300 (12,12) .477 T–1R0– Material: Brass –G = 20µ" (0,51µm) Gold –T = 200µ" (5,08µm) Tin Material: Brass –G = 20µ" (0,51µm) Gold –T = 200µ" (5,08µm) Tin T–1R7– D (1.78) .070 DIA (4,22) .166 (1,32) .052 Part No. (1,55) .061 DIA (0,71) .028 C T–1R7–02 (1,32) .052 DIA B A Note: Some sizes, styles and options are non-standard, non-returnable. T–1R7–01 Material: Brass –G = 10µ" (0,25µm) Gold –T = 200µ" (5,08µm) Tin WWW.SAMTEC.COM A B C D DIA TAIL OAL DIA (0,64) .025 (5,33) (13,46) (0,64) .530 .025 (0,89) .210 .035 F-211 SUPPLEMENT T–1R0–G S–1P1–G T, S SERIES MACHINED TERMINALS & SOCKETS T–1S6– S–1P1– B PART NO. T–1S6–07–X–2 (10,92) .430 T–1S6–08–X–2 (13,46) .530 (0,64) .025 SQ T–1S6–10–X–2 T–1S6–11–X–2 T–1S6–12–X–2 T–1S6–13–X–2 B (1,07) .042 DIA T–1S6–09–X–2 (18,54) T–1S6–14–X–2 T–1S6–15–X–2 T–1S6–16–X–2 T–1S6–17–X–2 T–1S6–18–X–2 T–1S6–19–X–2 T–1S6–20–X–2 T–1S6–21–X–2 .730 (21,08) .830 (23,62) .930 (26,16) 1.030 (31,24) 1.230 (36,32) 1.430 (16,00) .630 (11,30) .445 (12,19) .480 (7,62) .300 (33.78) 1.330 (28,70) 1.130 (8,51) .335 (0,76) .030 (1,83) .072 DIA (1,55) .061 (3,81) .150 (0,71) .028 (1,32) .052 DIA (3,18) .125 (0,51) .020 DIA Pins are supplied on a bandolier. Material: Phosphor Bronze X = Plating option (specify G or T) –G = 10µ" (0,25µm) Gold on .165" (4,19mm) contact area. Gold flash on balance –T = 200µ" (5,08µm) Tin Material: Brass –G = 10µ" (0,25µm) Gold –T = 200µ" (5,08µm) Tin S–1W1– (1,07) .042 DIA (0,76) .030 (1,83) .072 DIA Y Z ±.010 ±.015 S–1W1–2– (12,95) .510 (9,14) .360 (17,86) .703 (14,05) .553 S–1W1–3– (6,60) .260 (11,51) .453 Part No. (1,55) .061 DIA (0,71) .028 (1,32) .052 DIA (0,64) .025 SQ S–1W1–1– Z Y Material: Brass –G = 10µ" (0,25µm) Gold –T = 200µ" (5,08µm) Tin WWW.SAMTEC.COM (7,49) .295