«Picture_Description» is depicted

Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
SESDT Series – Cable Assembly, Socket, Teflon®
CC396 Crimp Contact
ISDE Body
See www.samtec.com for more information.
Revision: A
Date: November 12, 2014
Page 1
© Samtec, Inc.
Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
1.0 SCOPE
1.1 This specification covers performance, testing and quality requirements for SESDT 0,80 mm (.0315”) Discrete Wire
Cable Assembly. Testing was performed using a dual row, female SESDT Series cable assembly mated to a TEM
Series terminal strip unless otherwise noted.
2.0 DETAILED INFORMATION
2.1 Product prints, footprints, catalog pages, test reports and other specific, detailed information can be found at
www.samtec.com?SESDT.
3.0 PRODUCT DESCRIPTION
3.1 Product Series
ITEM
SOCKET
Crimp Contacts
CC396U, CC396M, CC396R
Housings
ISDE
Mating connectors
TEM 03.0 lead style, –L option
Cable Assemblies
SESDT
3.2 Materials and Platings
ITEM
SOCKET
Contact Material
BeCu
Contact Plating
Au over 50u" Ni
Housing Material
White Nylon
Insulation Material (Cable
Assemblies only)
Teflon
3.3 Agency Approvals
ITEM
SOCKET
UL File Numbers
E111594
Flammability Rating
94V-2
RoHS
RoHS Compliant
REACH
REACH 114 Compliant
Revision: A
Date: November 12, 2014
Page 2
© Samtec, Inc.
Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
4.0 TESTING
4.1 Current Rating: 1.9 A (One Pin Powered per row)
4.2 Voltage Rating: 200 VAC
4.3 Operating Temperature Range:
Components: -40°C to +195°C
Cable Assembly with Teflon Cable: -40°C to +125°C
4.4 Operating Humidity Range: 90% to 95% (Per EIA-364-31)
4.5 Electrical:
ITEM
TEST CONDITION
REQUIREMENT
STATUS
Withstanding Voltage
EIA-364-20 (No Flashover,
Sparkover, or Breakdown)
620 VAC
Pass
Insulation Resistance
EIA-364-21 (1000 MΩ
minimum)
1,000 MΩ
Pass
Contact Resistance
(LLCR)
EIA-364-23
Δ 15 mΩ maximum
(Samtec defined)/ No damage
Pass
REQUIREMENT
STATUS
4.6 Mechanical:
ITEM
TEST CONDITION
Durability
EIA-364-09C
25 cycles
Pass
Random Vibration
EIA-364-28 Condition V, Letter B
7.56 G 'RMS', 50 to 2000 Hz, 2
hours per axis, 3 axis total , PSD
0.04
Visual Inspection: No Damage
LLCR: Δ 15 mΩ maximum
Pass
Mechanical Shock
EIA-364-27 100 G, 6
milliseconds, sawtooth wave,
11.3 fps, 3 shocks/direction, 3
axis (18 total shocks)
Visual Inspection: No Damage
LLCR: Δ 15 mΩ maximum
Pass
Normal Force
EIA-364-04
30 grams minimum for gold
interface
Pass
Revision: A
Date: November 12, 2014
Page 3
© Samtec, Inc.
Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
4.7 Environmental:
ITEM
TEST CONDITION
REQUIREMENT
STATUS
Thermal Shock
EIA-364-32
Thermal Cycles: 100 (30 minute dwell)
Hot Temp: +85°C
Cold Temp: -55°C
Hot/Cold Transition: Immediate
Visual Inspection: No Damage
LLCR: Δ 15 mΩ
DWV: 620 VAC
IR: >1,000 MΩ
Pass
Thermal Aging
(Temp Life)
EIA-364-17
Test Condition 4 @ 105°C Condition B
for 250 hours
Visual Inspection: No Damage
LLCR: Δ 15 mΩ
DWV: 620 VAC
IR: >1,000 MΩ
Pass
Cyclic Humidity
EIA-364-31
Test Temp: +25°C to +65°C
Relative Humidity: 90 to 95%
Test Duration: 240 hours
Visual Inspection: No Damage
LLCR: Δ 15 mΩ
DWV: 620 VAC
IR: >1,000 MΩ
Pass
Gas Tight
EIA-364-36
Gas Exposure: Nitric Acid Vapor
Duration: 60 min.
Drying Temp.: 50°C +/- 3°C
Measurements: Within 1 hour of
Exposure
LLCR: Δ 15 mΩ
Pass
5.0 MATED SYSTEM
5.1 Polarizing Features - Chamfer prevents mis-mating connectors.
Revision: A
Date: November 12, 2014
Page 4
© Samtec, Inc.
Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
5.2 Mated Views
Mated view information can be found at link below:
http://www.samtec.com/documents/webfiles/cpdf/SESDT%20Mated%20Document.pdf
5.3 Mating Angle Requirements: Cable must be axially aligned to connector when mated and un-mated.
6.0 CRIMP RECOMMENDATIONS AND CABLE PREPARATION
Crimp recommendation and cable preparation can be found on the links below:
http://www.samtec.com/Prints/CC396-XXXX-X-X-MKT.pdf
7.0 APPLICATION INFORMATION
7.1 Cable Management: Samtec recommends some form of cable management to prevent non-axial forces being
applied to the connector.
7.2 Application tooling
CONTACT/TERMINAL TO TOOLING CHART
AUTO TOOLING*
Contact/
Terminal
AWG
Hand Tooling
CAT 3000 & AMP G
(40mm Stroke Length)
AMP T
(40mm Stroke Length)
AMP K
(30mm Stroke Length)
CC396
32
CAT-HT-396-3234-12
CAT-MA-393-3234-FR-03
CAT-MA-393-3234-FS-03
CAT-MA-393-3234-TR-03
Revision: A
Date: November 12, 2014
Page 5
© Samtec, Inc.
Product Specification
Series: SESDT 0,80 mm (.0315”) Double Row Discrete Wire Cable Assembly, Socket, Teflon®
8.0 ADDITIONAL RESOURCES
8.1 For additional mechanical testing or product information, contact our Customer Engineering Support Group at
[email protected]
8.2 For additional information on high speed performance testing, contact our Signal Integrity Group at
[email protected]
8.3 For additional processing information, contact our Interconnect Processing Group at [email protected]
8.4 For RoHS, REACH or other environmental compliance information, contact our Product Environmental
Compliance Group at [email protected]
Revision: A
Date: November 12, 2014
Page 6
© Samtec, Inc.