Multilayer Chip Varistor MLV貼片壓敏電阻 Contents / 目錄 Page VI SC0402ML-SC0603ML Series 122 SC0402E-SC0603E Series 124 ESD0402E-ESD0603E Series 126 SC0805 Series 128 SC1206 Series 128 SC1210 Series 129 SC1812 Series 129 SC2220Series 129 Multilayer Chip Varistor MLV貼片壓敏電阻 www.socay.com 121 Multilayer Chip Varistor SC0402ML - SC0603ML Series Features u SMD type zinc oxide based ceramic chip u Lead free plating termination provided good solderability characteristic u Insulator overcoat keeps excellent low and stable leakage current u Quick response time (<1ns) u Low clamping voltage u High transient current capability u Meet IEC 61000-4-2 standard Compact size for EIA 0402, 0603 u Construction & Dimensions L W T C Size EIA (EIAJ) 0402 (1005) 0603 (1608) Symbol Inches Millimeters Inches Millimeters L 0.038±0.005 0.96±0.12 0.063±0.006 1.60±0.15 W 0.019±0.003 0.48±0.0.07 0.031±0.004 0.80±0.10 T 0.020±0.004 0.50±0.10 0.031±0.008 0.80±0.20 C 0.010±0.006 0.25±0.15 0.012±0.008 0.30±0.20 www.socay.com 122 C Multilayer Chip Varistor SC0402ML - SC0603ML Series Electrical Characteristics (25±5ºC) (25±5ºC) SC0402ML Series Working Voltage Varistor Voltage Clamping Voltage Capacitance Peak Current Transient Energy △VV VC CP Imax Wmax Volts % Volts (Max.) pF (Typical) Amps (Max.) Joules (Max.) 5.5 8 ±20 19 270 20 0.05 7 9 12.5 ±20 32 130 20 0.05 SC0402ML150L 8 11 15 ±15 33 120 20 0.05 SC0402ML180K 11 14 18 ±10 38 90 20 0.05 SC0402ML220K 14 18 22 ±10 45 85 20 0.05 Clamping Voltage Capacitance Peak Current Transient Energy Symbol VRMS VDC Units Volts (Max.) Volts (Max.) SC0402ML080M 4 SC0402ML120M VV SC0603ML Series Working Voltage Varistor Voltage Symbol VRMS VDC VV △VV VC CP Imax Wmax Units Volts (Max.) Volts (Max.) Volts % Volts (Max.) pF (Typical) Amps (Max.) Joules (Max.) SC0603ML080M 4 5.5 8 ±20 19 270 30 0.1 SC0603ML120M 7 9 12.5 ±20 27 210 30 0.1 SC0603ML150L 8 11 15 ±15 33 200 30 0.1 SC0603ML180K 11 14 18 ±10 35 150 30 0.1 SC0603ML220K 14 18 22 ±10 40 130 30 0.1 SC0603ML310K 20 26 31 ±10 58 100 30 0.1 VRMS – Maximum AC operating voltage the varistor can maintain and not exceed 10μA leakage current VDC – Maximum DC operating voltage the varistor can maintain and not exceed 10μA leakage current VV – Voltage across the device measure at 1mA DC current. Equivalent to VB “breakdown voltage” VC – Maximum peak current across the varistor with 8/20μs waveform and 1A pulse current. CP – Device capacitance measured with zero volt bias 1Vrms at 1MHz. Imax – Maximum peak current which may be applied with 8/20μs waveform without device failure. W max– Maximum energy which may be dissipated with the 10/1000μs waveform without device failure. www.socay.com 123 Multilayer Chip Varistor SC0402E - SC0603E Series Features u SMD type zinc oxide based ceramic chip u Lead free plating termination provided good solderability characteristic u Insulator overcoat keeps excellent low and stable leakage current u Quick response time (<1ns) u Low clamping voltage u High transient current capability u Meet IEC 61000-4-2 standard Compact size for EIA 0402, 0603 u Construction & Dimensions L W T C Size EIA (EIAJ) 0402 (1005) 0603 (1608) Symbol Inches Millimeters Inches Millimeters L 0.038±0.005 0.96±0.12 0.063±0.006 1.60±0.15 W 0.019±0.003 0.48±0.0.07 0.031±0.004 0.80±0.10 T 0.020±0.004 0.50±0.10 0.031±0.008 0.80±0.20 C 0.010±0.006 0.25±0.15 0.012±0.008 0.30±0.20 www.socay.com 124 C Multilayer Chip Varistor SC0402E - SC0603E Series Electrical Characteristics SC0402E Series Rated Voltage Varistor Voltage Clamping Voltage Capacitance VDC (V) VV (V) VC (V) CP (pF) SC0402E050M05 ~5.5 7.6~12 25 5.0 SC0402E100N05 ~5.5 7.6~12 25 10 SC0402E050M09 ~9 11~17 35 5.0 SC0402E010M18 ~18 46~60 110* 1.0 Rated Voltage Varistor Voltage Clamping Voltage Capacitance VDC (V) VV (V) VC (V) CP (pF) SC0603E050M05 ~5.5 7.6~12 25 5.0 SC0603E100N05 ~5.5 7.6~12 25 10 SC0603E050M09 ~9 11~17 35 5.0 SC0603E010M18 ~18 46~60 110* 1.0 Part Number SC0603E Series Part Number VDC – Maximum DC operating voltage the varistor can maintain and not exceed 10μA leakage current. VV – Voltage across the device measure at 1mA DC current. Equivalent to VB “breakdown voltage” VC – Maximum peak current across the varistor with 8/20μs waveform and 1A pulse current. *: Maximum peak current across the varistor with 8/20μs waveform and 0.5A pulse current. CP – Device capacitance measured with zero volt bias 1Vrms at 1MHz. The pF is ±30% www.socay.com 125 ESD Suppressors ESD0402E-ESD0603E Series Low Capacitance Features u u u u u u u u RoHS compliant, lead-free and available halogen-free Protection against ESD voltages and currents (IEC 61000-4-2 Level 4) Extremely quick response time (<1 ns) present ideal ESD protection Extremely low capacitance Extremely low leakage current Bi-directional device Surface mount device Zero signal distortion Construction & Dimensions Unit: mm Substrate Ceramic (Alumina) Symbol 0402 0603 Encapsulate Polymer L 1.00±0.10 1.60±0.1 End termination Ag / Ni / Sn W 0.50±0.10 0.85±0.15 H 0.34±0.10 0.51±0.05 B 0.20±0.15 0.30±0.20 A 0.50±0.10 0.75±0.10 C 0.50±0.10 0.75±0.10 D 0.50±0.10 0.75±0.10 Recommended pad outline Electrical Characteristics Part Number Rated Leakage Peak Voltage Current Voltage VDC IL VP (V) (μA) (V) Trigger Clamping Voltage Voltage VT VC (V) (V) Capacitance CP @1MHz (pF) ESD Voltage Capability Response ESD Pulse Contact Contact Time Withstand Discharge Discharge (Pulses) (ns) (KV) (KV) Max. Typical Typical Typical Typical Typical Max. Max. Typical Typical Typical ESD0402E002M05 5 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0402E002M12 12 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M05 5 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M12 12 0.01 300 300 30 0.2 0.5 1 8 15 1000 ESD0603E002M24 24 0.01 300 250 30 0.2 0.5 1 8 15 1000 VP - The Peak voltage value shall be measured under the following conditions. ESD test conditions:IEC61000-4-2, 8KV contact discharge VT - Measurement by using Transmission Line Pulse (TLP) VC - Measurement by using Transmission Line Pulse (TLP) CP - Device Capacitance measured with 1Vrms www.socay.com 126 SC0805ML – SC2220ML Series Multilayer Chip Varistor Features u Rectangle, sizes serialization for hybrid integrated circuit or printed circuit surface mount components u There are many side electrode lead-out material, particularly suitable for surface mount technology for solderability and resistance to soldering heat of the stringent requirements u Fast response (<1ns) u Low leakage current, low clamping voltage Suitable for reflow, wave soldering and hot air hand soldering u Dimensions Size EIA (EIAJ) L W T Length (L) Width (W) Thickness (T) Inches Millimeters Inches Millimeters Inches Millimeters 0805 (2012) 0.079±0.008 2.00±0.20 0.049±0.006 1.25±0.15 0.047 Max 1.20 Max 1206 (3216) 0.126±0.008 3.20±0.20 0.063±0.006 1.60±0.15 0.059 Max 1.50 Max 1210 (3225) 0.126±0.008 3.20±0.20 0.098±0.008 2.50±0.20 0.059 Max 1.50 Max 1812 (4532) 0.177±0.008 4.50±0.20 0.126±0.008 3.20±0.20 0.079 Max 2.00 Max 2220 (5750) 0.224±0.008 5.70±0.20 0.197±0.008 5.00±0.20 0.098 Max 2.50 Max Recommended solder Pad Layout A B C D Size EIA (EIAJ) Inches Millimeters Inches Millimeters Inches Millimeters Inches Millimeters 0805 (2012) 0.039~0.059 1.0~1.5 0.126~0.150 3.2~3.8 0.047~0.055 1.2~1.4 0.012~0.024 0.3~0.6 1206 (3216) 0.071~0.098 1.8~2.5 0.165~0.228 4.2~5.8 0.047~0.063 1.2~1.6 0.016~0.032 0.4~0.8 1210 (3225) 0.071~0.098 1.8~2.5 0.165~0.228 4.2~5.8 0.071~0.098 1.8~2.5 0.020~0.040 0.5~1.0 1812 (4532) 0.098~0.138 2.5~3.5 0.217~0.240 5.5~6.1 0.091~0.126 2.3~3.2 0.024~0.043 0.6~1.1 2220 (5750) 0.138~0.181 3.5~4.6 0.236~0.283 6.0~7.2 0.189~0.217 4.8~5.5 0.047~0.090 1.2~2.3 Avoid material run this area www.socay.com 127 SC0805ML – SC2220ML Series Multilayer Chip Varistor Electrical Characteristics (25±5ºC) SC0805ML Series Working Voltage Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance @1mA DC 8/20μs 8/20μs 10/1000μs 1KHz <20μA Test Condition DC AC RMS Symbol VDC VRMS VB VC IP ET CP Units Volts (Max.) Volts (Max.) Volts Volts (Max.) Amps (Max.) Joules (Max.) pF SC0805ML050M 3.3 2.0 4.0~6.0 10.0 40 0.1 1190~2210 SC0805ML080M 5.6 4.0 6.4~10.1 15.5 40 0.1 770~1430 SC0805ML120M 9.0 6.0 10.8~16.2 25.0 40 0.1 560~1040 SC0805ML150M 11.0 8.0 13.2~19.8 30.0 40 0.1 525~975 SC0805ML180K 14.0 11.0 16.8~25.2 40.0 40 0.1 434~806 SC0805ML240K 18.0 14.0 21.6~32.4 54.0 40 0.1 385~715 SC0805ML270K 22.0 17.0 26.4~39.6 65.0 40 0.1 336~624 SC0805ML330K 26.0 20.0 31.2~46.8 75.0 40 0.1 280~520 SC0805ML390K 30.0 25.0 36.0~54.0 85.0 40 0.1 210~390 Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance @1mA DC 8/20μs 8/20μs 10/1000μs 1KHz SC1206ML Series Working Voltage <20μA Test Condition DC AC RMS Symbol VDC VRMS VB VC IP ET CP Units Volts (Max.) Volts (Max.) Volts Volts (Max.) Amps (Max.) Joules (Max.) pF SC1206ML050M 3.3 2.0 4.0~6.0 10.0 100 1.0 3010~5590 SC1206ML080M 5.6 4.0 6.4~10.1 15.5 100 1.0 2170~4030 SC1206ML120M 9.0 6.0 10.8~16.2 25.0 100 1.0 1400~2600 SC1206ML180K 14.0 11.0 16.8~25.2 40.0 100 1.0 1120~2080 SC1206ML240K 18.0 14.0 21.6~32.4 54.0 100 1.0 980~1820 SC1206ML270K 22.0 17.0 26.4~39.6 62.0 100 1.0 910~1690 SC1206ML330K 26.0 20.0 31.2~46.8 73.0 100 1.0 770~1430 SC1206ML390K 30.0 25.0 36.0~54.0 85.0 100 1.0 700~1300 SC1206ML470K 39.0 30.0 46.8~70.2 105.0 100 1.0 560~1040 SC1206ML680K 56.0 40.0 67.2~100.8 150.0 100 1.0 300~500 SC1206ML101K 75.0 50.0 90.0~135.0 200.0 100 1.0 180~380 www.socay.com 128 SC0805ML – SC2220ML Series Multilayer Chip Varistor Electrical Characteristics (25±5ºC) (Continue) SC1210ML Series Working Voltage Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance @1mA DC 8/20μs 8/20μs 10/1000μs 1KHz VB VC IP ET CP Amps (Max.) 250 Joules (Max.) 1.5 1190~2210 <20μA Test Condition DC AC RMS VDC VRMS SC1210ML180K Volts (Max.) 14.0 Volts (Max.) 11.0 16.8~25.2 Volts (Max.) 40 SC1210ML240K 18.0 14.0 21.5~32.4 51 250 1.5 532~988 SC1210ML270K 22.0 17.0 26.4~39.6 62.0 250 1.5 490~910 SC1210ML330K 27.0 20.0 32.4~46.8 75.0 250 1.5 476~884 SC1210ML390K 30.0 25.0 36.0~54.0 85.0 250 1.5 378~702 SC1210ML470K 40.0 30.0 48.0~86.4 105.0 250 1.5 336~624 SC1210ML560K 45.0 35.0 54.0~81.0 125.0 250 1.5 413~767 SC1210ML680K 56.0 40.0 67.2~100.8 150.0 250 1.5 280~520 SC1210ML101K 75.0 50.0 90.0~135.0 200.0 250 1.5 203~377 Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance @1mA DC 8/20μs 8/20μs 10/1000μs 1KHz Symbol Units Volts pF SC1812ML Series Working Voltage <20μA Test Condition DC AC RMS Symbol VDC VRMS VB VC IP ET CP Units Volts (Max.) Volts (Max.) Volts Volts (Max.) Amps (Max.) Joules (Max.) pF SC1812ML240K 18.0 14.0 21.6~32.4 51.0 800 2.3 3080~5720 SC1812ML270K 24.0 18.0 28.8~43.2 67.0 800 2.7 2100~3900 SC1812ML330K 28.0 21.0 33.6~50.4 78.0 800 2..9 1820~3380 SC1812ML390K 30.0 22.0 36.0~54.0 83.0 800 2.9 1610~2290 SC1812ML560K 45.0 33.0 54.0~81.0 124.0 800 3.1 1260~2340 SC1812ML620K 48.0 35.0 57.6~86.4 132.0 800 3.2 910~1690 Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance @1mA DC 8/20μs 8/20μs 10/1000μs 1KHz 1Vrms SC2220ML Series Working Voltage <20μA Test Condition DC AC RMS Symbol VDC VRMS VB VC IP ET CP Units Volts (Max.) Volts (Max.) Volts Volts (Max.) Amps (Max.) Joules (Max.) pF SC2220ML240K 18.0 14.0 21.6~27.0 51.0 1200 5.8 9800~18200 SC2220ML270K 22.0 17.0 26.4~39.6 62.0 1200 7.2 7700~14300 SC2220ML330K 27.0 20.0 32.4~46.8 75.0 1200 7.8 7000~13000 SC2220ML390K 30.0 25.0 36.0~54.0 85.0 1200 7.8 6300~11700 www.socay.com 129