Transient Voltage Suppressors Array for ESD Protection Low Capacitance ULC3304P10 Description DFN2510P10 The ULC3304P10 is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time, make these parts ideal for ESD protection on designs where board space is at a premium. Feature Functional Diagram u 150 Watts Peak Pulse Power per Line (tp=8/20μs) u Protects Four High Speed Lines u Low Clamping Voltage u RoHS Compliant u IEC61000-4-2 (ESD) ±30kV (air), ±30kV (contact) u IEC61000-4-4 (EFT) 40A (5/50ns) u IEC61000-4-5 (Lightning) 10A (8/20μs) Applications Configuration per Line u Portable Electronics u USB OTG interfaces u Video Graphics Cards u DFN2510P10 (2.5x1.0mm) Package u Notebooks, Desktops, and Servers u Molding Compound Flammability Rating : UL 94V-0 u Portable Instrumentation u Weight 5.0 Milligrams (Approximate) u Industrial Controls u Quantity Per Reel : 3,000pcs u Peripherals u Reel Size : 7 inch u Lead Finish : Lead Free Mechanical Characteristics Mechanical Characteristics Symbol Parameter Value Units 150 W PPP Peak Pulse Power (tp=8/20μs waveform) TL Lead Soldering Temperature 260 (10sec) ºC TSTG Storage Temperature Range -55 to +150 ºC TOP Operating Temperature Range -55 to +150 ºC Air Discharge ±30 Contact Discharge ±30 IEC61000-4-2 (ESD) IEC61000-4-4 (EFT) 40 A IEC61000-4-5 ( Lightning ) 10 A SOCAY Electronics Co., Ltd. Revision March 06, 2014 KV www.socay.com 1/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors Array for ESD Protection Low Capacitance ULC3304P10 Electrical Characteristics (@ 25℃ Unless Otherwise Specified ) Part Number Device Marking VRWM (V) (Max.) VB (V) (Min.) IT (mA) VC @1A (Max.) (Max.) 304U 3.3 4.0 1 6.5 15 ULC3304P10 (@A) IR (μA) (Max.) C (pF) (Typ.) 10 1 0.5 VC Characteristic Curves Fig1. 8/20μs Pulse Waveform Fig2. ESD Pulse Waveform (according to IEC 61000-4-2) tr 100 Peak Value IPP 80 100% TEST WAVEFORM PARAMETERS tr=8μs td=20μs Percent of Peak Pulse Current % IPP - Peak Pulse Current - % of IPP 120 60 40 td=t IPP/2 20 0 0 5 10 15 20 25 tr = 0.7~1ns Time (ns) 60ns ESD Clamping (+8KV Contac per IEC61000-4-2) Fig4. SOCAY Electronics Co., Ltd. Revision March 06, 2014 10% 30ns 30 t - Time (μs) Fig3. 90% ESD Clamping (-8KV Contac per IEC61000-4-2) www.socay.com 2/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors Array for ESD Protection Low Capacitance ULC3304P10 Transmission Line Pulse (TLP ) Transmission Line Pulse (TLP) is a measurement technique used in the Electrostatic Discharge (ESD) arena to characterize performance attributes of devices under ESD stresses. TLP is able to obtain current versus voltage (I−V) curves in which each data point is obtained with a 100 ns long pulse, with currents up to 40 A. TLP was first used in the ESD field to study human body model (HBM) in integrated circuits, but it is an equally valid tool in the field of system level ESD. The applicability of TLP to system level ESD is illustrated in Figure 1, which compares an 8 kV IEC61000-4-2 current waveform with TLP current pulses of 8 and 16 A. The current levels and time duration for the pulses are similar and the initial rise time for the TLP pulse is comparable to the rise time of the IEC61000-4-2’s initial current spike. This application note will give a basic introduction to TLP measurements and explain the datasheet parameters extracted from TLP for Yeashin Technology’s protection products. Comparison of a Current Waveform of IEC61000-4-2 with TLP Pulses at 8 and 16 A. The IEC61000-4-2 ESD waveforms is true to the Standard and is shown here as captured on an oscilloscope. The points A, B, and C show the points on the waveforms specified in IEC61000-4-2. ULC3304P10 4A (tp=100ns) 8A (tp=100ns) 5.5V(typ.) 8.5V(typ.) SOCAY Electronics Co., Ltd. Revision March 06, 2014 www.socay.com 3/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. Transient Voltage Suppressors Array for ESD Protection Low Capacitance ULC3304P10 DFN2510P10 Package Outline & Dimensions Millimeters Inches Symbol Min. Max. Min. Max. A 0.50 0.60 0.020 0.024 A1 0.00 0.05 0.000 0.002 A3 0.11REF D 2.45 2.55 0.096 0.100 E 0.95 1.05 0.037 0.041 D1 0.35 0.45 0.014 0.018 E1 0.35 0.45 0.014 0.018 k 0.15MIN b 0.15 e SOCAY Electronics Co., Ltd. Revision March 06, 2014 0.25 0.50TYP. L Soldering Footprint 0.004REF 0.35 0.45 0.006MIN 0.006 0.010 0.020TYP. 0.014 0.018 Symbol Inches Millimeters C (0.034) (0.875) G 0.008 0.20 P 0.020 0.50 P1 0.039 1.00 X 0.008 0.20 X1 0.016 0.40 Y 0.027 0.675 Y1 (0.061) 1.55 Z 0.061 1.55 www.socay.com 4/4 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information.